Increase program partition to 3MB

Author: nseidle

Firmware/min_spiffs.csv

@@ -0,0 +1,6 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x300000,
+app1,     app,  ota_1,   0x310000,0x300000,
+spiffs,   data, spiffs,     0x610000,0x30000,

Firmware/readme.md

@@ -16,8 +16,9 @@ This folder contains the firmware for the ESP32
 The SparkFun RTK firmware is compiled using Arduino (currently v1.8.15). To compile:
 
 1. Install [Arduino](https://www.arduino.cc/en/software). 
-2. Install ESP32 for Arduino. [Here](https://learn.sparkfun.com/tutorials/esp32-thing-hookup-guide#installing-via-arduino-ide-boards-manager) are some good instructions for installing it via the Arduino Boards manager. Note: We use the 'ESP32 Dev Module' for pin numbering. Select the correct board under Tools->Board->ESP32 Arduino->ESP32 Dev Module.
-3. Set the core settings: The 'Partition Scheme' must be set to 'Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS).
+2. Install ESP32 for Arduino. [Here](https://learn.sparkfun.com/tutorials/esp32-thing-hookup-guide#installing-via-arduino-ide-boards-manager) are some good instructions for installing it via the Arduino Boards manager. **Note**: Use v2.0.2 of the core. **Note:** We use the 'ESP32 Dev Module' for pin numbering. Select the correct board under Tools->Board->ESP32 Arduino->ESP32 Dev Module.
+3. Change the Parition table. Replace 'C:\Users\\[user name]\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.2\tools\partitions\min_spiffs.csv' with the min_spiff.csv file found in this folder. This will increase the program partition from a maximum of 1.9MB to 3MB.
+3. Set the core settings: The 'Partition Scheme' must be set to 'Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS). This will use the 'min_spiffs.csv' updated partition table.
 4. Obtain all the required libraries. **Note:** You should click on the link next to each of the #includes at the top of RTK_Surveyor.ino within the Arduino IDE to open the library manager and download them. Getting them directly from github also works but may not be 'official' releases:
     * [ESP32Time](https://github.com/fbiego/ESP32Time)
     * [ESPAsyncWebServer](https://github.com/me-no-dev/ESPAsyncWebServer) (not available via library manager)