Core 2.0.1.1

Author: Jason2866

README.md

@@ -27,6 +27,10 @@ You can use [Arduino-ESP32 Online Documentation](https://docs.espressif.com/proj
 * [FAQ](https://docs.espressif.com/projects/arduino-esp32/en/latest/faq.html)
 * [Troubleshooting](https://docs.espressif.com/projects/arduino-esp32/en/latest/troubleshooting.html)
 
+### Supported Chips
+
+Visit the [supported chips](https://docs.espressif.com/projects/arduino-esp32/en/latest/getting_started.html#supported-soc-s) documentation to see the list of current supported ESP32 SoCs.
+
 ### Decoding exceptions
 
 You can use [EspExceptionDecoder](https://github.com/me-no-dev/EspExceptionDecoder) to get meaningful call trace.

boards.txt

@@ -9690,10 +9690,20 @@ deneyapmini.build.boot=qio
 deneyapmini.build.partitions=default
 deneyapmini.build.defines=
 
-deneyapmini.menu.CDCOnBoot.default=Disabled
-deneyapmini.menu.CDCOnBoot.default.build.cdc_on_boot=0
-deneyapmini.menu.CDCOnBoot.cdc=Enabled
-deneyapmini.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
+deneyapmini.menu.CDCOnBoot.default=Enabled
+deneyapmini.menu.CDCOnBoot.default.build.cdc_on_boot=1
+deneyapmini.menu.CDCOnBoot.cdc=Disabled
+deneyapmini.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
+
+deneyapmini.menu.MSCOnBoot.default=Disabled
+deneyapmini.menu.MSCOnBoot.default.build.msc_on_boot=0
+deneyapmini.menu.MSCOnBoot.msc=Enabled
+deneyapmini.menu.MSCOnBoot.msc.build.msc_on_boot=1
+
+deneyapmini.menu.DFUOnBoot.default=Disabled
+deneyapmini.menu.DFUOnBoot.default.build.dfu_on_boot=0
+deneyapmini.menu.DFUOnBoot.dfu=Enabled
+deneyapmini.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
 
 deneyapmini.menu.PSRAM.disabled=Disabled
 deneyapmini.menu.PSRAM.disabled.build.defines=

cores/esp32/cbuf.h

@@ -62,7 +62,7 @@ class cbuf
 
     cbuf *next;
 
-private:
+protected:
     inline char* wrap_if_bufend(char* ptr) const
     {
         return (ptr == _bufend) ? _buf : ptr;

cores/esp32/core_version.h

@@ -1,4 +1,4 @@
-#define ARDUINO_ESP32_GIT_VER 0xa443b816
-#define ARDUINO_ESP32_GIT_DESC 2.0.1
-#define ARDUINO_ESP32_RELEASE_2_0_1
-#define ARDUINO_ESP32_RELEASE "2_0_1"
+#define ARDUINO_ESP32_GIT_VER 0x48fb4e47
+#define ARDUINO_ESP32_GIT_DESC 2.0.1.1
+#define ARDUINO_ESP32_RELEASE_2_0_1_1
+#define ARDUINO_ESP32_RELEASE "2_0_1_1"

cores/esp32/esp32-hal-i2c-slave.c

@@ -302,7 +302,7 @@ esp_err_t i2cSlaveInit(uint8_t num, int sda, int scl, uint16_t slaveID, uint32_t
     i2c_ll_slave_init(i2c->dev);
     i2c_ll_set_fifo_mode(i2c->dev, true);
     i2c_ll_set_slave_addr(i2c->dev, slaveID, false);
-    i2c_ll_set_tout(i2c->dev, 32000);
+    i2c_ll_set_tout(i2c->dev, I2C_LL_MAX_TIMEOUT);
     i2c_slave_set_frequency(i2c, frequency);
 
     if (!i2c_slave_check_line_state(sda, scl)) {

cores/esp32/esp32-hal-i2c.c

@@ -24,6 +24,7 @@
 #include "soc/soc_caps.h"
 #include "soc/i2c_periph.h"
 #include "hal/i2c_hal.h"
+#include "hal/i2c_ll.h"
 #include "driver/i2c.h"
 
 typedef volatile struct {
@@ -91,6 +92,8 @@ esp_err_t i2cInit(uint8_t i2c_num, int8_t sda, int8_t scl, uint32_t frequency){
         } else {
             bus[i2c_num].initialized = true;
             bus[i2c_num].frequency = frequency;
+            //Clock Stretching Timeout: 20b:esp32, 5b:esp32-c3, 24b:esp32-s2
+            i2c_set_timeout((i2c_port_t)i2c_num, I2C_LL_MAX_TIMEOUT);
         }
     }
 #if !CONFIG_DISABLE_HAL_LOCKS

cores/esp32/esp32-hal-ledc.c

@@ -17,7 +17,6 @@
 #include "freertos/task.h"
 #include "freertos/semphr.h"
 #include "esp32-hal-matrix.h"
-#include "soc/soc_caps.h"
 #include "soc/ledc_reg.h"
 #include "soc/ledc_struct.h"
 #include "driver/periph_ctrl.h"
@@ -332,21 +331,3 @@ double ledcChangeFrequency(uint8_t chan, double freq, uint8_t bit_num)
     double res_freq = _ledcSetupTimerFreq(chan, freq, bit_num);
     return res_freq;
 }
-
-static int8_t pin_to_channel[SOC_GPIO_PIN_COUNT] = { 0 };
-static int cnt_channel = SOC_LEDC_CHANNEL_NUM;
-void analogWrite(uint8_t pin, int value) {
-  // Use ledc hardware for internal pins
-  if (pin < SOC_GPIO_PIN_COUNT) {
-    if (pin_to_channel[pin] == 0) {
-      if (!cnt_channel) {
-          log_e("No more analogWrite channels available! You can have maximum %u", SOC_LEDC_CHANNEL_NUM);
-          return;
-      }
-      pin_to_channel[pin] = cnt_channel--;
-      ledcAttachPin(pin, cnt_channel);
-      ledcSetup(cnt_channel, 1000, 8);
-    }
-    ledcWrite(pin_to_channel[pin] - 1, value);
-  }
-}

cores/esp32/esp32-hal.h

@@ -90,8 +90,6 @@ void yield(void);
 #include "esp32-hal-psram.h"
 #include "esp32-hal-cpu.h"
 
-void analogWrite(uint8_t pin, int value);
-
 //returns chip temperature in Celsius
 float temperatureRead();
 

package.json

@@ -1,6 +1,6 @@
 {
     "name": "framework-arduinoespressif32",
     "description": "Arduino Wiring-based Framework (ESP32 Core) for Tasmota",
-    "version": "2.0.1",
+    "version": "2.0.1+1",
     "url": "https://github.com/tasmota/arduino-esp32"
 }