Merge branch 'master' into add-addw4-windows

Author: leviport

content/laptop-battery-thresholds.md

@@ -5,6 +5,8 @@ description: >
 keywords:
   - Battery
   - Battery Life
+  - Charging Thresholds
+  - FlexiCharge
 
 facebookImage: /_social/article
 twitterImage: /_social/article
@@ -20,6 +22,15 @@ The default charging profile for System76 laptops with Open Firmware has a start
 
 To determine if your laptop has Open Firmware or proprietary firmware, see [this article](/articles/open-firmware-systems). (If a system has Open Firmware, then it must also have Open EC to work with charging thresholds.) See [Charging Thresholds](#configuring-charging-thresholds-open-firmware) for Open Firmware systems or [FlexiCharger](#configuring-flexicharger-proprietary-firmware) for proprietary firmware systems.
 
+## Models that do not support either Charging Thresholds or FlexiCharge
+
+| Model | Codename |
+|:-----:|:---------:|
+| Pangolin | pang12 |
+| Pangolin | pang13 |
+| Pangolin | pang14 |
+| Pangolin | pang15 |
+
 ## Configuring Charging Thresholds (Open Firmware)
 
 **Note:** This feature is not currently finished. Currently, the thresholds are reset when the EC is reset (which happens when the system is shut down and the power is unplugged). Once the feature is complete, the thresholds will be persistent and a GUI will be available to set them. To work around this limitation in the short term, you can [use systemd to set thresholds at boot](#at-boot).
@@ -97,5 +108,3 @@ To adjust the thresholds, reboot the computer and enter the UEFI setup utility b
 ![Enabling FlexiCharger](/images/laptop-charging-thresholds/flexicharger.jpg)
 
 Once configured, save and exit the setup utility. The thresholds can be disabled at any time by setting FlexiCharger back to Disabled.
-
-**Note:** The pang12, pang13 and pang14 do not support FlexiCharging.

content/power-on-failure-desktop.md

@@ -28,11 +28,12 @@ tableOfContents: true
 6. If the power button does not light up, the computer may need a new power button or power supply. To troubleshoot the power button on a Thelio desktop, visit this [link](https://tech-docs.system76.com/models/thelio-massive-b1.2/repairs.html#troubleshooting-the-power-button).
 7. Does the computer turn on when using the power switch on the Thelio IO board instead of the button? The backup power button is located on the IO board near the power button on the internal part of the case.
 
-![Thelio Io power button](/images/failure-power-on/thelio-io-power-button.png)
+![Thelio Io v1 power button](/images/failure-power-on/thelio-io-v1-power-button.png)
 
-Instructions to remove the top case and access this button can be found here:
+> **NOTE: Thelio Io v1, in this photo the button is circled in red.**
 
-* [Thelio Mira](https://tech-docs.system76.com/models/thelio-mira-r1.0/repairs.html#troubleshooting-the-power-button)
-* [Thelio Mega](https://tech-docs.system76.com/models/thelio-mega-r1.0/repairs.html#troubleshooting-the-power-button)
-* [Thelio R1/R2 - Page 15](https://github.com/system76/docs/blob/gh-pages/service-manuals/pdfs/Thelio/R1/thelio-r1-service-manual.pdf)
-* [Thelio B1/B2 - Page 15](https://github.com/system76/docs/blob/gh-pages/service-manuals/pdfs/Thelio/B1/thelio-b1-service-manual.pdf)
+![Thelio Io v2 power button](/images/failure-power-on/thelio-io-v2-power-button.png)
+
+> **NOTE: Thelio Io v2, in this photo the button is highlighted in cyan.**
+
+Instructions to remove the top case and access this button can be found in the documenation for your system [here](/articles/guides).