Merge pull request #4 from su2code/feature_deform_tol

Mesh deformation tolerance

Author: economon

Inviscid_2D_Unconstrained_NACA0012/inv_NACA0012_basic.cfg

@@ -213,8 +213,8 @@ DEFORM_NONLINEAR_ITER= 1
 % Print the residuals during mesh deformation to the console (YES, NO)
 DEFORM_CONSOLE_OUTPUT= YES
 %
-% Factor to multiply smallest cell volume for deform tolerance (0.001 default)
-DEFORM_TOL_FACTOR = 0.001
+% Minimum residual criteria for the linear solver convergence of grid deformation
+DEFORM_LINEAR_SOLVER_ERROR= 1E-14
 %
 % Type of element stiffness imposed for FEA mesh deformation (INVERSE_VOLUME, 
 %                                          WALL_DISTANCE, CONSTANT_STIFFNESS)

Inviscid_3D_Constrained_ONERAM6/inv_ONERAM6_adv.cfg

@@ -312,8 +312,8 @@ DEFORM_LINEAR_SOLVER= FGMRES
 % Number of smoothing iterations for mesh deformation
 DEFORM_LINEAR_ITER= 500
 %
-% Factor to multiply smallest cell volume for deform tolerance (0.001 default)
-DEFORM_TOL_FACTOR = 1E-6
+% Minimum residual criteria for the linear solver convergence of grid deformation
+DEFORM_LINEAR_SOLVER_ERROR= 1E-14
 %
 % Type of element stiffness imposed for FEA mesh deformation (INVERSE_VOLUME, 
 %                                          WALL_DISTANCE, CONSTANT_STIFFNESS)

Multi_Objective_Shape_Design/inv_wedge_ROE_multiobj_combo.cfg

@@ -337,8 +337,8 @@ DEFORM_NONLINEAR_ITER= 1
 % Print the residuals during mesh deformation to the console (YES, NO)
 DEFORM_CONSOLE_OUTPUT= YES
 %
-% Factor to multiply smallest cell volume for deform tolerance (0.001 default)
-DEFORM_TOL_FACTOR = 1e-15
+% Minimum residual criteria for the linear solver convergence of grid deformation
+DEFORM_LINEAR_SOLVER_ERROR= 1E-14
 %
 % Type of element stiffness imposed for FEA mesh deformation (INVERSE_VOLUME,
 %                                          WALL_DISTANCE, CONSTANT_STIFFNESS)

Transitional_Flat_Plate/transitional_BC_model_ConfigFile.cfg

@@ -45,15 +45,9 @@ INC_VELOCITY_INIT= ( 50.1, 0.0, 0.0 )
 % match number of inlet markers. Options: VELOCITY_INLET, PRESSURE_INLET.
 INC_INLET_TYPE= VELOCITY_INLET
 %
-% Damping coefficient for iterative updates at pressure inlets. (0.1 by default)
-INC_INLET_DAMPING= 0.1
-%
 % List of outlet types for incompressible flows. List length must
 % match number of outlet markers. Options: PRESSURE_OUTLET, MASS_FLOW_OUTLET
 INC_OUTLET_TYPE= PRESSURE_OUTLET PRESSURE_OUTLET
-%
-% Damping coefficient for iterative updates at mass flow outlets. (0.1 by default)
-INC_OUTLET_DAMPING= 0.1
 
 % --------------------------- VISCOSITY MODEL ---------------------------------%
 %