Update stm32CubeProg scripts

All trailing arguments will be passed to the STM32CubeProgrammer

Signed-off-by: Frederic.Pillon <frederic.pillon@st.com>

Author: fpistm

linux/stm32CubeProg.sh

@@ -22,12 +22,15 @@ usage()
   echo "##   2: DFU"
   echo "## file_path: file path name to be downloaded: (bin, hex)"
   echo "## Options:"
-  echo "##   For SWD: -rst"
-  echo "##     -rst: Reset system (default)"
-  echo "##   For Serial: <com_port> -s"
-  echo "##     com_port: serial identifier. Ex: /dev/ttyS0"
-  echo "##     -s: start automatically"
-  echo "##   For DFU: none"
+  echo "##   For SWD and DFU: no mandatory options"
+  echo "##   For Serial: <com_port>"
+  echo "##     com_port: serial identifier (mandatory). Ex: /dev/ttyS0"
+  echo "##"
+  echo "## Note: all trailing arguments will be passed to the $STM32CP_CLI"
+  echo "##   They have to be valid commands for STM32 MCU"
+  echo "##   Ex: -g: Run the code at the specified address"
+  echo "##       -rst: Reset system"
+  echo "##       -s: start automatically (optional)"
   echo "############################################################"
   exit $1
 }
@@ -66,28 +69,26 @@ case $1 in
   0)
     PORT='SWD'
     MODE='mode=UR'
-    if [ $# -lt 3 ]; then
-      OPTS=-rst
-    else
-      OPTS=$3
-    fi;;
+    shift 2;;
   1)
     if [ $# -lt 3 ]; then
       usage 3
     else
       PORT=$3
-      if [ $# -gt 3 ]; then
-        shift 3
-        OPTS="$@"
-      fi
+      shift 3
     fi;;
   2)
-    PORT='USB1';;
+    PORT='USB1'
+    shift 2;;
   *)
     echo "Protocol unknown!"
     usage 4;;
 esac
 
+if [ $# -gt 0 ]; then
+  OPTS="$@"
+fi
+
 ${STM32CP_CLI} -c port=${PORT} ${MODE} -q -d ${FILEPATH} ${ADDRESS} ${OPTS}
 
 exit 0

macosx/stm32CubeProg

@@ -21,12 +21,15 @@ usage()
   echo "##   2: DFU"
   echo "## file_path: file path name to be downloaded: (bin, hex)"
   echo "## Options:"
-  echo "##   For SWD: -rst"
-  echo "##     -rst: Reset system (default)"
-  echo "##   For Serial: <com_port> -s"
-  echo "##     com_port: serial identifier. Ex: /dev/ttyS0"
-  echo "##     -s: start automatically"
-  echo "##   For DFU: none"
+  echo "##   For SWD and DFU: no mandatory options"
+  echo "##   For Serial: <com_port>"
+  echo "##     com_port: serial identifier (mandatory). Ex: /dev/ttyS0"
+  echo "##"
+  echo "## Note: all trailing arguments will be passed to the $STM32CP_CLI"
+  echo "##   They have to be valid commands for STM32 MCU"
+  echo "##   Ex: -g: Run the code at the specified address"
+  echo "##       -rst: Reset system"
+  echo "##       -s: start automatically (optional)"
   echo "############################################################"
   exit $1
 }
@@ -65,28 +68,26 @@ case $1 in
   0)
     PORT='SWD'
     MODE='mode=UR'
-    if [ $# -lt 3 ]; then
-      OPTS=-rst
-    else
-      OPTS=$3
-    fi;;
+    shift 2;;
   1)
     if [ $# -lt 3 ]; then
       usage 3
     else
       PORT=$3
-      if [ $# -gt 3 ]; then
-	shift 3
-        OPTS="$@"
-      fi
+      shift 3
     fi;;
   2)
-    PORT='USB1';;
+    PORT='USB1'
+    shift 2;;
   *)
     echo "Protocol unknown!"
     usage 4;;
 esac
 
+if [ $# -gt 0 ]; then
+  OPTS="$@"
+fi
+
 ${STM32CP_CLI} -c port=${PORT} ${MODE} -q -d ${FILEPATH} ${ADDRESS} ${OPTS}
 
 exit 0

win/stm32CubeProg.bat

@@ -39,22 +39,23 @@ goto :usage
 :SWD
 set PORT=SWD
 set MODE=mode=UR
-if "%~3"=="" (set OPTS=-rst) else (set OPTS=%3)
-goto :prog
+goto :opt
 
 :SERIAL
 if "%~3"=="" set ERROR=3 & goto :usage
 set PORT=%~3
-
-if "%~4"=="" goto :prog
-shift
 shift
-shift
-set OPTS=%*
-goto :prog
+goto :opt
 
 :DFU
 set PORT=USB1
+goto :opt
+
+:opt
+shift
+shift
+if "%~1"=="" goto :prog
+set OPTS=%*
 goto :prog
 
 :prog
@@ -70,10 +71,13 @@ exit 0
   echo   2: DFU
   echo file_path: file path name to be downloaded: (bin, hex)
   echo Options:
-  echo   For SWD: -rst
-  echo     -rst: Reset system (default)
-  echo   For Serial: ^<com_port^> -s
-  echo     com_port: serial identifier. Ex: /dev/ttyS0
-  echo     -s: start automatically
-  echo   For DFU: none
+  echo   For SWD and DFU: no mandatory options
+  echo   For Serial: ^<com_port^>
+  echo     com_port: serial identifier (mandatory). Ex: COM15
+  echo.
+  echo Note: all trailing arguments will be passed to the  %STM32CP_CLI%
+  echo   They have to be valid commands for STM32 MCU
+  echo   Ex: -g: Run the code at the specified address
+  echo       -rst: Reset system
+  echo       -s: start automatically (optional)
   exit %ERROR%