Clean up generic HAL conf file

Enable IPCC by default
Sorted by name

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

cores/arduino/stm32/stm32yyxx_hal_conf.h

@@ -9,9 +9,10 @@
 #define HAL_DMA_MODULE_ENABLED /* Required by other modules */
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_IPCC_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
-#define HAL_HSEM_MODULE_ENABLED
 
 /*
  * Optional HAL modules, can be enabled/disabled using
@@ -32,12 +33,25 @@
   #undef HAL_I2C_MODULE_ENABLED
 #endif
 
+#if !defined(HAL_I2S_MODULE_DISABLED)
+  #define HAL_I2S_MODULE_ENABLED
+#else
+  #undef HAL_I2S_MODULE_ENABLED
+#endif
+
 #if !defined(HAL_RTC_MODULE_DISABLED)
   #define HAL_RTC_MODULE_ENABLED
 #else
   #undef HAL_RTC_MODULE_ENABLED
 #endif
 
+#if !defined(HAL_SAI_MODULE_DISABLED)
+  #define HAL_SAI_MODULE_ENABLED
+#else
+  #undef HAL_SAI_MODULE_ENABLED
+#endif
+
+
 #if !defined(HAL_SPI_MODULE_DISABLED)
   #define HAL_SPI_MODULE_ENABLED
 #else
@@ -50,18 +64,6 @@
   #undef HAL_TIM_MODULE_ENABLED
 #endif
 
-#if !defined(HAL_I2S_MODULE_DISABLED)
-  #define HAL_I2S_MODULE_ENABLED
-#else
-  #undef HAL_I2S_MODULE_ENABLED
-#endif
-
-#if !defined(HAL_SAI_MODULE_DISABLED)
-  #define HAL_SAI_MODULE_ENABLED
-#else
-  #undef HAL_SAI_MODULE_ENABLED
-#endif
-
 /*
  * Not defined by default
  */
@@ -85,10 +87,10 @@
   #undef HAL_ETH_MODULE_ENABLED
 #endif
 
-#if !defined(HAL_SD_MODULE_DISABLED)
-  /*#define HAL_SD_MODULE_ENABLED*/
+#if !defined(HAL_OSPI_MODULE_DISABLED)
+  /*#define HAL_OSPI_MODULE_ENABLED*/
 #else
-  #undef HAL_SD_MODULE_ENABLED
+  #undef HAL_OSPI_MODULE_ENABLED
 #endif
 
 #if !defined(HAL_QSPI_MODULE_DISABLED)
@@ -97,18 +99,17 @@
   #undef HAL_QSPI_MODULE_ENABLED
 #endif
 
-#if !defined(HAL_OSPI_MODULE_DISABLED)
-  /*#define HAL_OSPI_MODULE_ENABLED*/
+#if !defined(HAL_SD_MODULE_DISABLED)
+  /*#define HAL_SD_MODULE_ENABLED*/
 #else
-  #undef HAL_OSPI_MODULE_ENABLED
+  #undef HAL_SD_MODULE_ENABLED
 #endif
 
 /*
  * Disabled HAL modules, handled thanks Arduino menu
  */
 /*#define HAL_UART_MODULE_ENABLED*/
 /*#define HAL_PCD_MODULE_ENABLED*/
-/*#define HAL_IPCC_MODULE_ENABLED*/
 
 /*
  * Unused HAL modules
@@ -135,7 +136,6 @@
   HAL_HCD_MODULE_ENABLED
   HAL_HRTIM_MODULE_ENABLED
   HAL_ICACHE_MODULE_ENABLED
-  HAL_IPCC_MODULE_ENABLED
   HAL_IRDA_MODULE_ENABLED
   HAL_IWDG_MODULE_ENABLED // IWD built-in library uses LL
   HAL_JPEG_MODULE_ENABLED

platform.txt

@@ -85,7 +85,7 @@ build.pid=0
 # that the preprocessor cannot detect.
 
 # VirtIO RPMsg Serial Flags
-build.virtio_flags=-DVIRTIOCON -DHAL_IPCC_MODULE_ENABLED -DNO_ATOMIC_64_SUPPORT -DMETAL_INTERNAL -DMETAL_MAX_DEVICE_REGIONS=2 -DVIRTIO_SLAVE_ONLY -DVIRTIO_LOG
+build.virtio_flags=-DVIRTIOCON -DNO_ATOMIC_64_SUPPORT -DMETAL_INTERNAL -DMETAL_MAX_DEVICE_REGIONS=2 -DVIRTIO_SLAVE_ONLY -DVIRTIO_LOG
 build.virtio_extra_include="-I{build.system.path}/Middlewares/OpenAMP" "-I{build.system.path}/Middlewares/OpenAMP/open-amp/lib/include" "-I{build.system.path}/Middlewares/OpenAMP/libmetal/lib/include" "-I{build.system.path}/Middlewares/OpenAMP/virtual_driver"
 
 # Build information's