[F2] Update stm32f2xx_hal_conf_default.h

Signed-off-by: Frederic.Pillon <frederic.pillon@st.com>

Author: fpistm

system/STM32F2xx/stm32f2xx_hal_conf_default.h

@@ -7,27 +7,10 @@
   *
   * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -56,12 +39,14 @@ extern "C" {
 #define HAL_MODULE_ENABLED
 #define HAL_ADC_MODULE_ENABLED
 #define HAL_CAN_MODULE_ENABLED
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
 #define HAL_CRC_MODULE_ENABLED
 #define HAL_CRYP_MODULE_ENABLED
 #define HAL_DAC_MODULE_ENABLED
 #define HAL_DCMI_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_ETH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_NAND_MODULE_ENABLED
 #define HAL_NOR_MODULE_ENABLED
@@ -167,6 +152,33 @@ in voltage and temperature.*/
 #define  DATA_CACHE_ENABLE            1U
 #endif
 
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
 /* ########################## Assert Selection ############################## */
 /**
   * @brief Uncomment the line below to expanse the "assert_param" macro in the
@@ -263,6 +275,10 @@ in voltage and temperature.*/
 #include "stm32f2xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f2xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
 #include "stm32f2xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -279,6 +295,10 @@ in voltage and temperature.*/
 #include "stm32f2xx_hal_can.h"
 #endif /* HAL_CAN_MODULE_ENABLED */
 
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f2xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
 #ifdef HAL_CRC_MODULE_ENABLED
 #include "stm32f2xx_hal_crc.h"
 #endif /* HAL_CRC_MODULE_ENABLED */
@@ -394,7 +414,7 @@ in voltage and temperature.*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed.
   *         If expr is true, it returns no value.