system: G0: update STM32G0xx HAL Drivers to v1.4.2

Included in STM32CubeG0 FW v1.5.0

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

system/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -132,8 +132,7 @@ typedef struct
 
   FunctionalState LowPowerAutoPowerOff; /*!< Select the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling).
                                        This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait').
-                                       This parameter can be set to ENABLE or DISABLE.
-                                       Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */
+                                       This parameter can be set to ENABLE or DISABLE. */
 
   FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) or continuous mode for ADC group regular,
                                        after the first ADC conversion start trigger occurred (software start or external trigger).
@@ -473,7 +472,7 @@ typedef  void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to
 /** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment
   * @{
   */
-#define ADC_DATAALIGN_RIGHT                (LL_ADC_DATA_ALIGN_RIGHT)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
+#define ADC_DATAALIGN_RIGHT                (LL_ADC_DATA_ALIGN_RIGHT)      /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
 #define ADC_DATAALIGN_LEFT                 (LL_ADC_DATA_ALIGN_LEFT)       /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/
 /**
   * @}
@@ -516,17 +515,17 @@ typedef  void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to
 #define ADC_EXTERNALTRIG_T1_CC4       (LL_ADC_REG_TRIG_EXT_TIM1_CH4)             /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
 #if defined(TIM2)
 #define ADC_EXTERNALTRIG_T2_TRGO      (LL_ADC_REG_TRIG_EXT_TIM2_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM2 */
 #define ADC_EXTERNALTRIG_T3_TRGO      (LL_ADC_REG_TRIG_EXT_TIM3_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
 #if defined(TIM4)
 #define ADC_EXTERNALTRIG_T4_TRGO      (LL_ADC_REG_TRIG_EXT_TIM4_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM4 */
 #if defined(TIM6)
 #define ADC_EXTERNALTRIG_T6_TRGO      (LL_ADC_REG_TRIG_EXT_TIM6_TRGO)            /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM6 */
 #if defined(TIM15)
 #define ADC_EXTERNALTRIG_T15_TRGO     (LL_ADC_REG_TRIG_EXT_TIM15_TRGO)           /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM15 */
 #define ADC_EXTERNALTRIG_EXT_IT11     (LL_ADC_REG_TRIG_EXT_EXTI_LINE11)          /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */
 /**
   * @}
@@ -941,7 +940,7 @@ typedef  void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to
                                  ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO)  || \
                                  ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \
                                  ((REGTRIG) == ADC_SOFTWARE_START)          )
-#endif
+#endif /* TIM15 && TIM6 && TIM2 */
 
 #define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV)    || \
                                              ((EOC_SELECTION) == ADC_EOC_SEQ_CONV))
@@ -1707,8 +1706,8 @@ void                    HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
   * @{
   */
 /* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef       HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig);
-HAL_StatusTypeDef       HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig);
+HAL_StatusTypeDef       HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *pConfig);
+HAL_StatusTypeDef       HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig);
 
 /**
   * @}

system/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h

@@ -103,7 +103,7 @@ typedef enum
 typedef struct __COMP_HandleTypeDef
 #else
 typedef struct
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
 {
   COMP_TypeDef       *Instance;       /*!< Register base address    */
   COMP_InitTypeDef   Init;            /*!< COMP required parameters */
@@ -173,7 +173,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
 #define COMP_WINDOWOUTPUT_COMP2                 (COMP_CSR_WINOUT | COMP_WINDOWMODE_COMP2) /*!< Window output synthetized on COMP2 output: COMP2 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */
 #if defined(COMP3)
 #define COMP_WINDOWOUTPUT_COMP3                 (COMP_CSR_WINOUT)                         /*!< Window output synthetized on COMP3 output: COMP3 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */
-#endif
+#endif /* COMP3 */
 #define COMP_WINDOWOUTPUT_BOTH                  (0x00000001UL)                            /*!< Window output synthetized on both comparators output of pair of comparator selected (COMP1 and COMP2, or COMP2 and COMP3 for devices featuring COMP3 instance): both comparators outputs are no more indicating their own state, but global window mode state (logical high means monitored signal is within comparators window). This is a specific configuration (technically possible but not relevant from application point of view: 2 comparators output used for the same signal level), standard configuration for window mode is one of the settings above. */
 /**
   * @}
@@ -307,7 +307,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
                                                     } while(0)
 #else
 #define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
 
 /**
   * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE").
@@ -674,7 +674,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
 #define COMP_EXTI_LINE_COMP2           (EXTI_IMR1_IM18)  /*!< EXTI line 18 connected to COMP2 output */
 #if defined(COMP3)
 #define COMP_EXTI_LINE_COMP3           (EXTI_IMR1_IM20)  /*!< EXTI line 20 connected to COMP3 output */
-#endif
+#endif /* COMP3 */
 /**
   * @}
   */
@@ -714,7 +714,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
 #else
 #define COMP_GET_EXTI_LINE(__INSTANCE__)    (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1  \
                                              : COMP_EXTI_LINE_COMP2)
-#endif
+#endif /* COMP3 */
 /**
   * @}
   */
@@ -738,7 +738,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
 (((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE)                || \
  ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)|| \
  ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON)  )
-#endif
+#endif /* COMP3 */
 
 #define IS_COMP_WINDOWOUTPUT(__WINDOWOUTPUT__) (((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_EACH_COMP) || \
                                                 ((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_COMP1)     || \

system/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_comp.h

@@ -127,7 +127,7 @@ extern "C" {
   #define HSI48_VALUE   48000000U             /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
                                                The real value my vary depending on manufacturing process variations.*/
 #endif /* HSI48_VALUE */
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
 
 /**
   * @brief Internal Low Speed oscillator (LSI) value.
@@ -167,7 +167,7 @@ in voltage and temperature.*/
 #if !defined  (EXTERNAL_I2S2_CLOCK_VALUE)
   #define EXTERNAL_I2S2_CLOCK_VALUE    48000U /*!< Value of the I2S2 External clock source in Hz*/
 #endif /* EXTERNAL_I2S2_CLOCK_VALUE */
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
 
 /* Tip: To avoid modifying this file each time you need to use different HSE,
    ===  you can define the HSE value in your toolchain compiler preprocessor. */

system/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_conf_template.h

@@ -60,19 +60,22 @@ typedef struct
 {
   uint8_t DefaultPolynomialUse;       /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
                                             If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
-                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 +
+                                            X^4 + X^2+ X +1.
                                             In that case, there is no need to set GeneratingPolynomial field.
-                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */
+                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and
+                                            CRCLength fields must be set. */
 
   uint8_t DefaultInitValueUse;        /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
                                            If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
-                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field.
-                                           If otherwise set to DEFAULT_INIT_VALUE_DISABLE,  InitValue field must be set. */
+                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field. If
+                                           otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */
 
   uint32_t GeneratingPolynomial;      /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree
-                                           respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
-                                           e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
-                                           No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE.   */
+                                           respectively equal to 7, 8, 16 or 32. This field is written in normal,
+                                           representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1
+                                           is written 0x65. No need to specify it if DefaultPolynomialUse is set to
+                                            DEFAULT_POLYNOMIAL_ENABLE.   */
 
   uint32_t CRCLength;                 /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
                                            Value can be either one of
@@ -87,14 +90,18 @@ typedef struct
   uint32_t InputDataInversionMode;    /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
                                            Can be either one of the following values
                                            @arg @ref CRC_INPUTDATA_INVERSION_NONE       no input data inversion
-                                           @arg @ref CRC_INPUTDATA_INVERSION_BYTE       byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
-                                           @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD   halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
-                                           @arg @ref CRC_INPUTDATA_INVERSION_WORD       word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+                                           @arg @ref CRC_INPUTDATA_INVERSION_BYTE       byte-wise inversion, 0x1A2B3C4D
+                                           becomes 0x58D43CB2
+                                           @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD   halfword-wise inversion,
+                                           0x1A2B3C4D becomes 0xD458B23C
+                                           @arg @ref CRC_INPUTDATA_INVERSION_WORD       word-wise inversion, 0x1A2B3C4D
+                                           becomes 0xB23CD458 */
 
   uint32_t OutputDataInversionMode;   /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
                                             Can be either
                                             @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE   no CRC inversion,
-                                            @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted into 0x22CC4488 */
+                                            @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted
+                                             into 0x22CC4488 */
 } CRC_InitTypeDef;
 
 /**
@@ -112,12 +119,16 @@ typedef struct
 
   uint32_t InputDataFormat;                /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
                                             Can be either
-                                            @arg @ref CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes (8-bit data)
-                                            @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of half-words (16-bit data)
-                                            @arg @ref CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words (32-bit data)
-
-                                           Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
-                                           must occur if InputBufferFormat is not one of the three values listed above  */
+                                            @arg @ref CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes
+                                            (8-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of
+                                            half-words (16-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words
+                                            (32-bit data)
+
+                                          Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization
+                                          error must occur if InputBufferFormat is not one of the three values listed
+                                          above  */
 } CRC_HandleTypeDef;
 /**
   * @}
@@ -199,15 +210,6 @@ typedef struct
   * @}
   */
 
-/** @defgroup CRC_Aliases CRC API aliases
-  * @{
-  */
-#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility  */
-#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
-/**
-  * @}
-  */
-
 /**
   * @}
   */
@@ -267,7 +269,6 @@ typedef struct
 #define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
                                         ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
 
-
 #define IS_DEFAULT_INIT_VALUE(VALUE)  (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
                                        ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
 

system/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h

@@ -107,7 +107,7 @@ typedef enum
 typedef struct __CRYP_HandleTypeDef
 #else
 typedef struct
-#endif
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
 {
   AES_TypeDef                       *Instance;        /*!< AES Register base address */
 

system/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cryp.h

@@ -64,7 +64,7 @@ typedef enum
 typedef struct __DAC_HandleTypeDef
 #else
 typedef struct
-#endif
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
 {
   DAC_TypeDef                 *Instance;     /*!< Register base address             */
 

system/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h

@@ -110,10 +110,10 @@ typedef enum
 #if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #ifndef __weak
     #define __weak  __attribute__((weak))
-  #endif
+  #endif /* __weak */
   #ifndef __packed
     #define __packed  __attribute__((packed))
-  #endif
+  #endif /* __packed */
 #elif  defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
 #ifndef __weak
 #define __weak   __attribute__((weak))
@@ -129,10 +129,10 @@ typedef enum
 #if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
   #ifndef __ALIGN_BEGIN
     #define __ALIGN_BEGIN
-  #endif
+  #endif /* __ALIGN_BEGIN */
   #ifndef __ALIGN_END
     #define __ALIGN_END      __attribute__ ((aligned (4)))
-  #endif
+  #endif /* __ALIGN_END */
 #elif defined   (__GNUC__) && !defined (__CC_ARM)  /* GNU Compiler */
 #ifndef __ALIGN_END
 #define __ALIGN_END    __attribute__ ((aligned (4U)))
@@ -185,7 +185,7 @@ typedef enum
 */
 #define __RAM_FUNC __attribute__((section(".RamFunc")))
 
-#endif
+#endif /* __CC_ARM || __ARMCC_VERSION */
 
 /**
   * @brief  __NOINLINE definition
@@ -202,7 +202,7 @@ typedef enum
 */
 #define __NOINLINE _Pragma("optimize = no_inline")
 
-#endif
+#endif /* __CC_ARM || __ARMCC_VERSION */
 
 
 #ifdef __cplusplus