system(L1) update STM32L1xx HAL Drivers to v1.4.5

Included in STM32CubeL1 FW v1.10.4

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

system/Drivers/STM32L1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -8,13 +8,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -54,4 +53,3 @@
 #endif /* __STM32_ASSERT_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32_assert_template.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -739,7 +738,7 @@
 /**
   * @brief  Close or open the internal switch COMP1_SW1.
   *         This switch connects I/O pin PC3 (can be used as ADC channel 13)
-  *         and OPAMP3 ouput to ADC switch matrix (ADC channel VCOMP, channel
+  *         and OPAMP3 output to ADC switch matrix (ADC channel VCOMP, channel
   *         26) and COMP1 non-inverting input.
   *         Pin PC3 connection depends on another switch setting, refer to
   *         macro "__HAL_ADC_CHANNEL_SPEED_FAST()".
@@ -759,7 +758,7 @@
   */
 
 /**
-  * @brief  Enable or disable Hysteresis of the input schmitt triger of Ports A
+  * @brief  Enable or disable Hysteresis of the input schmitt trigger of Ports A
   *         When the I/Os are programmed in input mode by standard I/O port
   *         registers, the Schmitt trigger and the hysteresis are enabled by default.
   *         When hysteresis is disabled, it is possible to read the
@@ -777,7 +776,7 @@
           } while(0)
 
 /**
-  * @brief  Enable or disable Hysteresis of the input schmitt triger of Ports B
+  * @brief  Enable or disable Hysteresis of the input schmitt trigger of Ports B
   *         When the I/Os are programmed in input mode by standard I/O port
   *         registers, the Schmitt trigger and the hysteresis are enabled by default.
   *         When hysteresis is disabled, it is possible to read the
@@ -795,7 +794,7 @@
           } while(0)
 
 /**
-  * @brief  Enable or disable Hysteresis of the input schmitt triger of Ports C
+  * @brief  Enable or disable Hysteresis of the input schmitt trigger of Ports C
   *         When the I/Os are programmed in input mode by standard I/O port
   *         registers, the Schmitt trigger and the hysteresis are enabled by default.
   *         When hysteresis is disabled, it is possible to read the
@@ -813,7 +812,7 @@
           } while(0)
 
 /**
-  * @brief  Enable or disable Hysteresis of the input schmitt triger of Ports D
+  * @brief  Enable or disable Hysteresis of the input schmitt trigger of Ports D
   *         When the I/Os are programmed in input mode by standard I/O port
   *         registers, the Schmitt trigger and the hysteresis are enabled by default.
   *         When hysteresis is disabled, it is possible to read the
@@ -833,7 +832,7 @@
 #if defined (GPIOE_BASE)
 
 /**
-  * @brief  Enable or disable Hysteresis of the input schmitt triger of Ports E
+  * @brief  Enable or disable Hysteresis of the input schmitt trigger of Ports E
   *         When the I/Os are programmed in input mode by standard I/O port
   *         registers, the Schmitt trigger and the hysteresis are enabled by default.
   *         When hysteresis is disabled, it is possible to read the
@@ -855,7 +854,7 @@
 #if defined(GPIOF_BASE) || defined(GPIOG_BASE)
 
 /**
-  * @brief  Enable or disable Hysteresis of the input schmitt triger of Ports F
+  * @brief  Enable or disable Hysteresis of the input schmitt trigger of Ports F
   *         When the I/Os are programmed in input mode by standard I/O port
   *         registers, the Schmitt trigger and the hysteresis are enabled by default.
   *         When hysteresis is disabled, it is possible to read the
@@ -873,7 +872,7 @@
           } while(0)
 
 /**
-  * @brief  Enable or disable Hysteresis of the input schmitt triger of Ports G
+  * @brief  Enable or disable Hysteresis of the input schmitt trigger of Ports G
   *         When the I/Os are programmed in input mode by standard I/O port
   *         registers, the Schmitt trigger and the hysteresis are enabled by default.
   *         When hysteresis is disabled, it is possible to read the
@@ -993,4 +992,3 @@ void              HAL_DBGMCU_DisableDBGStandbyMode(void);
 
 #endif /* __STM32L1xx_HAL_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -52,7 +51,7 @@
   *          - For all parameters except 'Resolution', 'ScanConvMode', 'LowPowerAutoWait', 'LowPowerAutoPowerOff', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group.
   *          - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going.
   *         If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
-  *         without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fullfills the ADC state condition) on the fly).
+  *         without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
   */
 typedef struct
 {
@@ -1364,5 +1363,3 @@ HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef* hadc);
 
 
 #endif /* __STM32L1xx_HAL_ADC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -567,6 +566,3 @@ HAL_StatusTypeDef       HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,
 #endif
 
 #endif /* __STM32L1xx_HAL_ADC_EX_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -211,7 +210,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
 /** @defgroup COMP_WindowMode COMP WindowMode
   * @{
   */
-#define COMP_WINDOWMODE_DISABLE               (0x00000000U)  /*!< Window mode disabled: COMP1 non-inverting input is independant */
+#define COMP_WINDOWMODE_DISABLE               (0x00000000U)  /*!< Window mode disabled: COMP1 non-inverting input is independent */
 #define COMP_WINDOWMODE_ENABLE                COMP_CSR_WNDWE          /*!< Window mode enabled: COMP1 non-inverting input is no more accessible, even from ADC channel VCOMP) (connected to COMP2 non-inverting input) */
 
 #define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \
@@ -655,4 +654,3 @@ uint32_t              HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
 
 #endif /* __STM32L1xx_HAL_COMP_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -315,4 +314,3 @@
 
 #endif /* __STM32L1xx_HAL_COMP_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp_ex.h

@@ -8,13 +8,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -58,6 +57,7 @@
 #define HAL_RTC_MODULE_ENABLED
 #define HAL_SD_MODULE_ENABLED
 #define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
 #define HAL_SPI_MODULE_ENABLED
 #define HAL_SRAM_MODULE_ENABLED
 #define HAL_TIM_MODULE_ENABLED
@@ -265,6 +265,10 @@
  #include "stm32l1xx_hal_sd.h"
 #endif /* HAL_SD_MODULE_ENABLED */
 
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32l1xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
 #ifdef HAL_SPI_MODULE_ENABLED
  #include "stm32l1xx_hal_spi.h"
 #endif /* HAL_SPI_MODULE_ENABLED */
@@ -321,4 +325,3 @@
 #endif /* __STM32L1xx_HAL_CONF_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_conf_template.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -434,4 +433,3 @@ void     HAL_SYSTICK_Callback(void);
 #endif /* __STM32L1xx_HAL_CORTEX_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cortex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -158,7 +157,7 @@ uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t
 /** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
   * @{
   */
-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc);
 /**
   * @}
   */
@@ -180,5 +179,3 @@ HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
 #endif
 
 #endif /* STM32L1xx_HAL_CRC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/