[MP1] Update stm32mp1xx_hal_conf_default.h

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

system/STM32MP1xx/stm32mp1xx_hal_conf_default.h

@@ -2,11 +2,10 @@
   ******************************************************************************
   * @file    stm32mp1xx_hal_conf.h
   * @author  MCD Application Team
-  * @brief   HAL configuration template file. 
+  * @brief   HAL configuration template file.
   *          This file should be copied to the application folder and renamed
   *          to stm32mp1xx_hal_conf.h.
   ******************************************************************************
-  *
   * @attention
   *
   * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
@@ -58,90 +57,118 @@
 #define HAL_MODULE_ENABLED
 #define HAL_ADC_MODULE_ENABLED
 #define HAL_CEC_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
 #define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
 #define HAL_DAC_MODULE_ENABLED
-#define HAL_DSI_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
 #define HAL_DFSDM_MODULE_ENABLED
-#define HAL_ETH_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
 #define HAL_EXTI_MODULE_ENABLED
 #define HAL_FDCAN_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
 #define HAL_HASH_MODULE_ENABLED
 #define HAL_HSEM_MODULE_ENABLED
-#define HAL_HCD_MODULE_ENABLED
 #define HAL_I2C_MODULE_ENABLED
-#define HAL_I2S_MODULE_ENABLED
 #define HAL_IPCC_MODULE_ENABLED
-#define HAL_IWDG_MODULE_ENABLED
 #define HAL_LPTIM_MODULE_ENABLED
-#define HAL_LTDC_MODULE_ENABLED
-#define HAL_NAND_MODULE_ENABLED
-#define HAL_NOR_MODULE_ENABLED
-#define HAL_PCD_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
 #define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
 #define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
 #define HAL_SAI_MODULE_ENABLED
 #define HAL_SD_MODULE_ENABLED
-#define HAL_RTC_MODULE_ENABLED
 #define HAL_SMBUS_MODULE_ENABLED
 #define HAL_SPDIFRX_MODULE_ENABLED
 #define HAL_SPI_MODULE_ENABLED
-#define HAL_SRAM_MODULE_ENABLED
-#define HAL_TAMP_MODULE_ENABLED
 #define HAL_TIM_MODULE_ENABLED
-#define HAL_TMPSENS_MODULE_ENABLED
 #define HAL_UART_MODULE_ENABLED
 #define HAL_USART_MODULE_ENABLED
 #define HAL_WWDG_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-/*#define HAL_MDMA_MODULE_ENABLED   */
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
 #endif
 
-/* ########################## Oscillator Values adaptation ####################*/
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief This is the list of modules where register callback can be used
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS    0u
+#define USE_HAL_CEC_REGISTER_CALLBACKS    0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS    0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS    0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS    0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS    0u
+#define USE_HAL_UART_REGISTER_CALLBACKS   0u
+#define USE_HAL_USART_REGISTER_CALLBACKS  0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS   0u
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+#if !defined (USE_SPI_CRC)
+#define USE_SPI_CRC                     0U
+#endif
+
+/* ######################### Oscillator Values adaptation ################### */
 /**
   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
   *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).  
+  *        (when HSE is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSE_VALUE) 
-#define HSE_VALUE    ((uint32_t)24000000) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE            24000000U  /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
+/**
+  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+  *        Timeout value
+  */
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
   * @brief Internal High Speed oscillator (HSI) value.
   *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL). 
+  *        (when HSI is used as system clock source, directly or through the PLL).
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE            64000000U  /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
+/**
+  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+  *        Timeout value
+  */
+#if !defined  (HSI_STARTUP_TIMEOUT)
+  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+
 /**
   * @brief Internal Low Speed oscillator (LSI) value.
   */
-#if !defined  (LSI_VALUE) 
+#if !defined  (LSI_VALUE)
   #define LSI_VALUE            32000U
 #endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
-
 /**
   * @brief External Low Speed oscillator (LSE) value.
-  *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
 #if !defined  (LSE_VALUE)
-  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+  #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */
 #endif /* LSE_VALUE */
 
+/**
+  * @brief Time out for LSE start up value in ms.
+  */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
 /**
@@ -154,8 +181,8 @@
 
 /**
   * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source 
-  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
   */
 #if !defined  (EXTERNAL_CLOCK_VALUE)
   #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External clock in Hz*/
@@ -167,25 +194,36 @@
 /* ########################### System Configuration ######################### */
 /**
   * @brief This is the HAL system configuration section
-  */     
+  */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            0x0FU /*!< tick interrupt priority */
+#endif
+#if !defined (TICK_INT_PRIORITY)
+#define  TICK_INT_PRIORITY            ((uint32_t)0x00) /*!< tick interrupt priority */
+#endif
+#if !defined (USE_RTOS)
 #define  USE_RTOS                     0U
-
+#endif
+#if !defined (PREFETCH_ENABLE)
 #define  PREFETCH_ENABLE              0U
+#endif
+#if !defined (INSTRUCTION_CACHE_ENABLE)
 #define  INSTRUCTION_CACHE_ENABLE     0U
+#endif
+#if !defined (DATA_CACHE_ENABLE)
 #define  DATA_CACHE_ENABLE            0U
+#endif
 
 /* ########################## Assert Selection ############################## */
 /**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
   *        HAL drivers code
   */
-/* #define USE_FULL_ASSERT    1U */ 
+/* #define USE_FULL_ASSERT    1U */
 
 /* Includes ------------------------------------------------------------------*/
 /**
-  * @brief Include module's header file 
+  * @brief Include module's header file
   */
 
 #ifdef HAL_RCC_MODULE_ENABLED
@@ -244,18 +282,6 @@
  #include "stm32mp1xx_hal_dfsdm.h"
 #endif /* HAL_DFSDM_MODULE_ENABLED */
 
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32mp1xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
- #include "stm32mp1xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
- #include "stm32mp1xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
 #ifdef HAL_FDCAN_MODULE_ENABLED
  #include "stm32mp1xx_hal_fdcan.h"
 #endif /* HAL_FDCAN_MODULE_ENABLED */
@@ -264,50 +290,18 @@
  #include "stm32mp1xx_hal_hash.h"
 #endif /* HAL_HASH_MODULE_ENABLED */
 
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32mp1xx_hal_hcd.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
 #ifdef HAL_I2C_MODULE_ENABLED
  #include "stm32mp1xx_hal_i2c.h"
 #endif /* HAL_I2C_MODULE_ENABLED */
 
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32mp1xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
 #ifdef HAL_IPCC_MODULE_ENABLED
  #include "stm32mp1xx_hal_ipcc.h"
 #endif /* HAL_IPCC_MODULE_ENABLED */
 
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32mp1xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32mp1xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
 #ifdef HAL_LPTIM_MODULE_ENABLED
  #include "stm32mp1xx_hal_lptim.h"
 #endif /* HAL_LPTIM_MODULE_ENABLED */
 
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32mp1xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
- #include "stm32mp1xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
- #include "stm32mp1xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32mp1xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
 #ifdef HAL_PWR_MODULE_ENABLED
  #include "stm32mp1xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */
@@ -320,6 +314,10 @@
  #include "stm32mp1xx_hal_rng.h"
 #endif /* HAL_RNG_MODULE_ENABLED */
 
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
 #ifdef HAL_SAI_MODULE_ENABLED
  #include "stm32mp1xx_hal_sai.h"
 #endif /* HAL_SAI_MODULE_ENABLED */
@@ -328,14 +326,6 @@
  #include "stm32mp1xx_hal_sd.h"
 #endif /* HAL_SD_MODULE_ENABLED */
 
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32mp1xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32mp1xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
 #ifdef HAL_SMBUS_MODULE_ENABLED
  #include "stm32mp1xx_hal_smbus.h"
 #endif /* HAL_SMBUS_MODULE_ENABLED */
@@ -348,26 +338,10 @@
  #include "stm32mp1xx_hal_spi.h"
 #endif /* HAL_SPI_MODULE_ENABLED */
 
-#ifdef HAL_SRAM_MODULE_ENABLED
- #include "stm32mp1xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32mp1xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_TAMP_MODULE_ENABLED
- #include "stm32mp1xx_hal_tamp.h"
-#endif /* HAL_TAMP_MODULE_ENABLED */
-
 #ifdef HAL_TIM_MODULE_ENABLED
  #include "stm32mp1xx_hal_tim.h"
 #endif /* HAL_TIM_MODULE_ENABLED */
 
-#ifdef HAL_TMPSENS_MODULE_ENABLED
- #include "stm32mp1xx_hal_tmpsens.h"
-#endif /* HAL_TMPSENS_MODULE_ENABLED */
-
 #ifdef HAL_UART_MODULE_ENABLED
  #include "stm32mp1xx_hal_uart.h"
 #endif /* HAL_UART_MODULE_ENABLED */
@@ -379,26 +353,30 @@
 #ifdef HAL_WWDG_MODULE_ENABLED
  #include "stm32mp1xx_hal_wwdg.h"
 #endif /* HAL_WWDG_MODULE_ENABLED */
-   
+
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
   * @param  expr: If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
-  *         line number of the call that failed. 
+  *         line number of the call that failed.
   *         If expr is true, it returns no value.
   * @retval None
   */
   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
   void assert_failed(uint8_t* file, uint32_t line);
 #else
-  #define assert_param(expr) ((void)0)
+  #define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */
 
 #ifdef __cplusplus
 }
 #endif
 
 #endif /* __STM32MP1xx_HAL_CONF_DEFAULT_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+