[F7] Update STM32F7xx HAL Drivers to v1.2.9

Included in STM32CubeF7 FW v1.16.1

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

# Conflicts:
#	system/Drivers/STM32YYxx_HAL_Driver_version.md

Author: fpistm

system/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -52,7 +52,7 @@
   *          - For all parameters except 'Resolution', 'ScanConvMode', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group.
   *          - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going.
   *         If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
-  *         without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fullfills the ADC state condition) on the fly).
+  *         without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
   */
 typedef struct
 {

system/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_adc.h

@@ -255,7 +255,7 @@ typedef enum
   HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID       = 0x08U,    /*!< CAN Rx FIFO 1 message pending callback ID     */
   HAL_CAN_RX_FIFO1_FULL_CB_ID              = 0x09U,    /*!< CAN Rx FIFO 1 full callback ID                */
   HAL_CAN_SLEEP_CB_ID                      = 0x0AU,    /*!< CAN Sleep callback ID                         */
-  HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID         = 0x0BU,    /*!< CAN Wake Up fropm Rx msg callback ID          */
+  HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID         = 0x0BU,    /*!< CAN Wake Up from Rx msg callback ID          */
   HAL_CAN_ERROR_CB_ID                      = 0x0CU,    /*!< CAN Error callback ID                         */
 
   HAL_CAN_MSPINIT_CB_ID                    = 0x0DU,    /*!< CAN MspInit callback ID                       */
@@ -295,11 +295,11 @@ typedef  void (*pCAN_CallbackTypeDef)(CAN_HandleTypeDef *hcan); /*!< pointer to
 #define HAL_CAN_ERROR_RX_FOV0         (0x00000200U)  /*!< Rx FIFO0 overrun error                               */
 #define HAL_CAN_ERROR_RX_FOV1         (0x00000400U)  /*!< Rx FIFO1 overrun error                               */
 #define HAL_CAN_ERROR_TX_ALST0        (0x00000800U)  /*!< TxMailbox 0 transmit failure due to arbitration lost */
-#define HAL_CAN_ERROR_TX_TERR0        (0x00001000U)  /*!< TxMailbox 1 transmit failure due to tranmit error    */
-#define HAL_CAN_ERROR_TX_ALST1        (0x00002000U)  /*!< TxMailbox 0 transmit failure due to arbitration lost */
-#define HAL_CAN_ERROR_TX_TERR1        (0x00004000U)  /*!< TxMailbox 1 transmit failure due to tranmit error    */
-#define HAL_CAN_ERROR_TX_ALST2        (0x00008000U)  /*!< TxMailbox 0 transmit failure due to arbitration lost */
-#define HAL_CAN_ERROR_TX_TERR2        (0x00010000U)  /*!< TxMailbox 1 transmit failure due to tranmit error    */
+#define HAL_CAN_ERROR_TX_TERR0        (0x00001000U)  /*!< TxMailbox 0 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TX_ALST1        (0x00002000U)  /*!< TxMailbox 1 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR1        (0x00004000U)  /*!< TxMailbox 1 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TX_ALST2        (0x00008000U)  /*!< TxMailbox 2 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR2        (0x00010000U)  /*!< TxMailbox 2 transmit failure due to transmit error    */
 #define HAL_CAN_ERROR_TIMEOUT         (0x00020000U)  /*!< Timeout error                                        */
 #define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U)  /*!< Peripheral not initialized                           */
 #define HAL_CAN_ERROR_NOT_READY       (0x00080000U)  /*!< Peripheral not ready                                 */

system/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_can.h

@@ -121,7 +121,7 @@ typedef struct
   *          b6  Error information
   *             0  : No Error
   *             1  : Error
-  *          b5     IP initilisation status
+  *          b5     IP initialization status
   *             0  : Reset (IP not initialized)
   *             1  : Init done (IP initialized. HAL CEC Init function already called)
   *          b4-b3  (not used)
@@ -138,7 +138,7 @@ typedef struct
   *          RxState value coding follow below described bitmap :
   *          b7-b6  (not used)
   *             xx : Should be set to 00
-  *          b5     IP initilisation status
+  *          b5     IP initialization status
   *             0  : Reset (IP not initialized)
   *             1  : Init done (IP initialized)
   *          b4-b2  (not used)

system/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cec.h

@@ -267,7 +267,6 @@ typedef struct
 #define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
                                         ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
 
-
 #define IS_DEFAULT_INIT_VALUE(VALUE)  (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
                                        ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
 

system/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_crc.h

@@ -65,6 +65,7 @@ typedef struct
   uint32_t HeaderSize;                /*!< The size of header buffer in word  */
   uint32_t *B0;                       /*!< B0 is first authentication block used only  in AES CCM mode */
   uint32_t DataWidthUnit;              /*!< Data With Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/
+  uint32_t HeaderWidthUnit;            /*!< Header Width Unit, this parameter can be value of @ref CRYP_Header_Width_Unit*/
   uint32_t KeyIVConfigSkip;            /*!< CRYP peripheral Key and IV configuration skip, to config Key and Initialization
                                            Vector only once and to skip configuration for consecutive processings.
                                            This parameter can be a value of @ref CRYP_Configuration_Skip */
@@ -210,6 +211,17 @@ typedef  void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp);    /*!< point
 #define CRYP_DATAWIDTHUNIT_WORD   0x00000000U  /*!< By default, size unit is word */
 #define CRYP_DATAWIDTHUNIT_BYTE   0x00000001U  /*!< By default, size unit is word */
 
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Header_Width_Unit CRYP Header Width Unit
+  * @{
+  */
+
+#define CRYP_HEADERWIDTHUNIT_WORD   0x00000000U  /*!< By default, header size unit is word */
+#define CRYP_HEADERWIDTHUNIT_BYTE   0x00000001U  /*!< By default, header size unit is byte */
+
 /**
   * @}
   */