[L0] Update HAL default configuration

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

system/STM32L0xx/stm32l0xx_hal_conf_default.h

@@ -44,6 +44,7 @@ extern "C" {
 #define HAL_CRYP_MODULE_ENABLED
 #define HAL_DAC_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
 #define HAL_FIREWALL_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
@@ -76,19 +77,19 @@ extern "C" {
   *        (when HSE is used as system clock source, directly or through the PLL).
   */
 #if !defined  (HSE_VALUE)
-#define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-#define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
   * @brief Internal Multiple Speed oscillator (MSI) default value.
   *        This value is the default MSI range value after Reset.
   */
 #if !defined  (MSI_VALUE)
-#define MSI_VALUE    ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/
+  #define MSI_VALUE    (2097152U)         /*!< Value of the Internal oscillator in Hz*/
 #endif /* MSI_VALUE */
 
 /**
@@ -97,14 +98,14 @@ extern "C" {
   *        (when HSI is used as system clock source, directly or through the PLL).
   */
 #if !defined  (HSI_VALUE)
-#define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE    (16000000U)        /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE)
-#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+#define HSI48_VALUE (48000000U)           /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -113,25 +114,26 @@ extern "C" {
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE)
-#define LSI_VALUE  ((uint32_t)37000U)       /*!< LSI Typical Value in Hz*/
+ #define LSI_VALUE  (37000U)                 /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-The real value may vary depending on the variations
-in voltage and temperature.*/
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
 /**
   * @brief External Low Speed oscillator (LSE) value.
   *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
 #if !defined  (LSE_VALUE)
-#define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+  #define LSE_VALUE    (32768U)             /*!< Value of the External oscillator in Hz*/
 #endif /* LSE_VALUE */
 
 /**
   * @brief Time out for LSE start up value in ms.
   */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-#define LSE_STARTUP_TIMEOUT  ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT    (5000U)    /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
+
 /* Tip: To avoid modifying this file each time you need to use different HSE,
    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 
@@ -223,6 +225,10 @@ in voltage and temperature.*/
 #include "stm32l0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_CORTEX_MODULE_ENABLED
 #include "stm32l0xx_hal_cortex.h"
 #endif /* HAL_CORTEX_MODULE_ENABLED */
@@ -285,7 +291,6 @@ in voltage and temperature.*/
 
 #ifdef HAL_RTC_MODULE_ENABLED
 #include "stm32l0xx_hal_rtc.h"
-
 #endif /* HAL_RTC_MODULE_ENABLED */
 
 #ifdef HAL_SPI_MODULE_ENABLED