Update variant_DATABOARD.cpp - add clock config w/ HSE prediv

Signed-off-by: its-kronos <140297693+its-kronos@users.noreply.github.com>

Author: its-kronos

variants/STM32F1xx/F103C8T_F103CB(T-U)/variant_DATABOARD.cpp

@@ -68,4 +68,72 @@ const uint32_t analogInputPin[] = {
   17  // A9,  PB1
 };
 
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief  System Clock Configuration
+  *         The system Clock is configured as follow :
+  *            System Clock source            = PLL (HSE)
+  *            SYSCLK(Hz)                     = 72000000
+  *            HCLK(Hz)                       = 72000000
+  *            AHB Prescaler                  = 1
+  *            APB1 Prescaler                 = 2
+  *            APB2 Prescaler                 = 1
+  *            PLL_Source                     = HSE
+  *            PLL_Mul                        = 9
+  *            Flash Latency(WS)              = 2
+  *            ADC Prescaler                  = 6
+  *            USB Prescaler                  = 1.5
+  * @param  None
+  * @retval None
+  */
+WEAK void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
+
+  /* Initializes the CPU, AHB and APB busses clocks */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV2;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+    Error_Handler();
+  }
+
+  /* Initializes the CPU, AHB and APB busses clocks */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+    Error_Handler();
+  }
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_USB;
+  PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
+  PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+    Error_Handler();
+  }
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+
+
 #endif /* ARDUINO_DATABOARD */