[F7] Update the system source file

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

system/STM32F7xx/system_stm32f7xx.c

@@ -65,13 +65,30 @@
 
 /************************* Miscellaneous Configuration ************************/
 
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */
-/* #define VECT_TAB_SRAM */
+
 #ifndef VECT_TAB_OFFSET
-#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
-                                   This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define USER_VECT_TAB_ADDRESS
 #endif
+
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Define USER_VECT_TAB_ADDRESS line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+#if defined(USER_VECT_TAB_ADDRESS)
+/*!< Define VECT_TAB_SRAM if you need to relocate your vector Table
+     in Sram else user remap will be done in Flash. */
+#if defined(VECT_TAB_SRAM)
+#define VECT_TAB_BASE_ADDRESS   RAMDTCM_BASE    /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#endif /* VECT_TAB_SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
 /******************************************************************************/
 
 /**
@@ -150,12 +167,11 @@ void SystemInit(void)
   /* Disable all interrupts */
   RCC->CIR = 0x00000000;
 
-  /* Configure the Vector Table location add offset address ------------------*/
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
-#endif
+
+  /* Configure the Vector Table location -------------------------------------*/
+#if defined(USER_VECT_TAB_ADDRESS)
+  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
 }
 
 /**