Resort the examples

Author: nseidle

examples/Example10_SetRoverMode/Example10_SetRoverMode.ino

@@ -40,7 +40,7 @@ void setup()
   //We must start the serial port before using it in the library
   SerialGNSS.begin(115200, SERIAL_8N1, pin_UART1_RX, pin_UART1_TX);
 
-  myGNSS.enableDebugging(); // Print all debug to Serial
+  //myGNSS.enableDebugging(); // Print all debug to Serial
 
   if (myGNSS.begin(SerialGNSS) == false) //Give the serial port over to the library
   {

examples/Example12_FactoryReset/Example12_FactoryReset.ino

@@ -40,7 +40,7 @@ void setup()
   //We must start the serial port before using it in the library
   SerialGNSS.begin(115200, SERIAL_8N1, pin_UART1_RX, pin_UART1_TX);
 
-  myGNSS.enableDebugging(); // Print all debug to Serial
+  //myGNSS.enableDebugging(); // Print all debug to Serial
 
   if (myGNSS.begin(SerialGNSS) == false) //Give the serial port over to the library
   {

examples/Example15_PollForValidRTCMMessages/Example15_PollForValidRTCMMessages.ino

@@ -22,9 +22,10 @@
   Note: Almost any ESP32 pins can be used for serial.
   Connect a dual or triband GNSS antenna: https://www.sparkfun.com/products/21801
 
-55 RTCM messages supported: 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1009, 1010, 1011, 1012, 1013, 1019, 1020, 1033, 
-1042, 1044, 1045, 1046, 1071, 1072, 1073, 1074, 1075, 1076, 1077, 1081, 1082, 1083, 1084, 1085, 1086, 1087, 1091, 1092, 1093, 1094, 1095, 1096, 1097, 
-1104, 1111, 1112, 1113, 1114, 1115, 1116, 1117, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 
+  68 RTCM messages supported: 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1009, 1010, 1011, 1012, 1013, 1019, 1020, 
+  1033, 1042, 1044, 1045, 1046, 1071, 1072, 1073, 1074, 1075, 1076, 1077, 1081, 1082, 1083, 1084, 1085, 1086, 1087, 
+  1091, 1092, 1093, 1094, 1095, 1096, 1097, 1101, 1102, 1103, 1104, 1105, 1106, 1107, 1111, 1112, 1113, 1114, 1115, 
+  1116, 1117, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1131, 1132, 1133, 1134, 1135, 1136, 1137, 
 
 */
 
@@ -65,8 +66,8 @@ void setup()
   int delayBetweenCommands = 10;
   char comPort[] = "COM3"; //Enable on a different port than the one we are using
 
-  Serial.println("Scanning 1000 to 1130");
-  for (int x = 1000 ; x < 1130 ; x++)
+  Serial.println("Scanning 1000 to 1300");
+  for (int x = 1000 ; x <= 1300 ; x++)
   {
     char myTest[100] = {0};
     sprintf(myTest, "RTCM%04d", x);

examples/Example11_UsbNMEA/Example11_UsbNMEA.ino renamed to examples/Example2_UsbNMEA/Example2_UsbNMEA.ino

@@ -56,19 +56,6 @@ void setup()
   //Turn off all NMEA, RTCM, and any other message that may be reporting periodically
   response &= myGNSS.disableOutput();
 
-  //Enable GPS L1/L2/L5 signals
-  if(myGNSS.sendCommand("UNMASK GPS") == true) Serial.println("GPS enabled");
-  else Serial.println("GPS unmask error");
-
-  if(myGNSS.sendCommand("UNMASK L1") == true) Serial.println("GPS L1 enabled");
-  else Serial.println("GPS unmask L1 error");
-
-  if(myGNSS.sendCommand("UNMASK L2") == true) Serial.println("GPS L2 enabled");
-  else Serial.println("GPS unmask L2 error");
-
-  if(myGNSS.sendCommand("UNMASK L5") == true) Serial.println("GPS L5 enabled");
-  else Serial.println("GPS unmask L5 error");
-
   float outputRate = 0.5; //0.5 = 2 reports per second.
 
   char comPort[] = "COM1";

examples/Example3_EnableNMEA_5Hz/Example3_EnableNMEA_5Hz.ino

@@ -40,7 +40,7 @@ void setup()
   //We must start the serial port before using it in the library
   SerialGNSS.begin(115200, SERIAL_8N1, pin_UART1_RX, pin_UART1_TX);
 
-  myGNSS.enableDebugging(); // Print all debug to Serial
+  //myGNSS.enableDebugging(); // Print all debug to Serial
 
   if (myGNSS.begin(SerialGNSS) == false) //Give the serial port over to the library
   {

examples/Example4_EnableNMEA/Example4_EnableNMEA.ino

@@ -40,7 +40,7 @@ void setup()
   //We must start the serial port before using it in the library
   SerialGNSS.begin(115200, SERIAL_8N1, pin_UART1_RX, pin_UART1_TX);
 
-  myGNSS.enableDebugging(); // Print all debug to Serial
+  //myGNSS.enableDebugging(); // Print all debug to Serial
 
   if (myGNSS.begin(SerialGNSS) == false) //Give the serial port over to the library
   {