Merge branch 'main' of https://github.com/sparkfun/SparkFun_Thing_Plus_ESP32_C6

Author: SFEMark

README.md

@@ -1 +1,40 @@
-# SparkFun_Thing_Plus_ESP32_C6
+SparkFun Thing Plus - ESP32-C6
+==============================
+
+[![SparkFun Thing Plus - ESP32-C6](https://cdn.sparkfun.com/r/600-600/assets/parts/2/3/0/8/5/DEV-22924-Thing-Plus-ESP32-C6-Feature.jpg)](https://www.sparkfun.com/products/22924)
+
+[*SparkFun Thing Plus - ESP32-C6 (DEV-22924)*](https://www.sparkfun.com/products/22924)
+
+The SparkFun Thing Plus ESP32-C6 is a powerful wireless development board built around the ESP32-C6 WROOM-1-N16 wireless module from espressif<sup>&trade;</sup>. The ESP32-C6 is built around a single-core RISC-V processor with 16MB internal Flash memory. It supports WiFi 6, Bluetooth<sup>&reg;</sup> 5.3, Zigbee and Thread (802.12.4) wireless protocols and has a built-in PCB antenna. The ESP32-C6 has 23 multifunctional GPIO (*most* peripherals available on any GPIO), up to 7 12-bit ADC channels, up to 2 UARTs, USB Serial, one Low-Power UART, two I<sup>2</sup>C buses (one standard, one low-power), and one I<sup>2</sup>S bus.
+
+This Thing Plus has a pair of 0.1"-spaced plated through hole (PTH) pins breaking out all of the ESP32's GPIO pins as well as connections for Reset, Boot, regulator enable, and the voltage rails (3.3V, USB, Battery), a USB-C connector, 2-pin JST connector for attaching a single-cell LiPo battery, MCP73831 battery charger, MAX17048 battery fuel gauge, 4-pin Qwiic connector, and &micro;SD card slot. The board has three LEDs for Power (Red), Battery Charge Indicator (Yellow), and STAT (RGB WS2812). The WS2812's data-in pin is tied to IO23 on the ESP32-C6.  
+
+Repository Contents
+-------------------
+
+* **/Documents** - Datasheets, additional product information 
+* **/Hardware** - Eagle design files (.brd, .sch)
+* **/Production** - Production panel files (.brd)
+* **/docs** - Documentation files for the Thing Plus ESP32-C6
+
+Documentation
+--------------
+
+* **[Hookup Guide](https://docs.sparkfun.com/SparkFun_LTE_Stick_LARA_R6)** - Basic hookup guide for the SparkFun Thing Plus - ESP32-C6.
+
+Product Versions
+----------------
+* [DEV-22924](https://www.sparkfun.com/products/22924) - Initial release
+
+License Information
+-------------------
+
+This product is _**open source**_! 
+
+Please review the LICENSE.md file for license information. 
+
+If you have any questions or concerns on licensing, please contact technical support on our [SparkFun forums](https://forum.sparkfun.com/viewforum.php?f=152).
+
+Distributed as-is; no warranty is given.
+
+- Your friends at SparkFun.