Compiles but is untested.

Still need to finish commenting.

Author: SFE-Brudnerd

examples/Example01_Basic_OneShot/Example01_Basic_OneShot.ino

@@ -24,55 +24,63 @@
 
 #include "SparkFun_AS7331.h"
 
-SfeAS7331ArdI2C myUVSensor;
+void setup() {
 
-int8_t result = SFE_BUS_OK;
+}
 
-void setup() {
-  Serial.begin(115200);
-  while(!Serial){delay(100);};
-  Serial.println("UV LED Example.");
+void loop() {
+  
+}
 
-  // Initialize sensor and run default setup.
-  if(myUVSensor.begin() == false) {
-    Serial.println("Sensor failed to begin. Please check your wiring!");
-    Serial.println("Spinning...");
-    while(1);
-  }
+// SfeAS7331ArdI2C myUVSensor;
 
-  Serial.println("Sensor began.");
+// int8_t result = SFE_BUS_OK;
 
-  // Set measurement mode and change device operating mode to measure.
-  if(myUVSensor.startMeasurement(MEAS_MODE_CMD) == false) {
-    Serial.println("Sensor did not get set properly.");
-    Serial.println("Spinning...");
-    while(1);
-  }
+// void setup() {
+//   Serial.begin(115200);
+//   while(!Serial){delay(100);};
+//   Serial.println("UV LED Example.");
 
-  Serial.println("Set mode to command.");
+//   // Initialize sensor and run default setup.
+//   if(myUVSensor.begin() == false) {
+//     Serial.println("Sensor failed to begin. Please check your wiring!");
+//     Serial.println("Spinning...");
+//     while(1);
+//   }
 
-}
+//   Serial.println("Sensor began.");
 
-void loop() {
+//   // Set measurement mode and change device operating mode to measure.
+//   if(myUVSensor.startMeasurement(MEAS_MODE_CMD) == false) {
+//     Serial.println("Sensor did not get set properly.");
+//     Serial.println("Spinning...");
+//     while(1);
+//   }
+
+//   Serial.println("Set mode to command.");
+
+// }
+
+// void loop() {
 
-  // Send a start measurement command.
-  if(SFE_BUS_OK != myUVSensor.setStartStateMode(START_STATE_ENABLED))
-    Serial.println("Error starting reading!");
+//   // Send a start measurement command.
+//   if(SFE_BUS_OK != myUVSensor.setStartStateMode(START_STATE_ENABLED))
+//     Serial.println("Error starting reading!");
 
-  // Wait for a bit longer than the conversion time.
-  delay(2+(1 << myUVSensor.getConfigConversionTime()));
+//   // Wait for a bit longer than the conversion time.
+//   delay(2+(1 << myUVSensor.getConfigConversionTime()));
 
-  // Read UV values.
-  if(SFE_BUS_OK != myUVSensor.readAllUV())
-    Serial.println("Error reading UV.");
+//   // Read UV values.
+//   if(SFE_BUS_OK != myUVSensor.readAllUV())
+//     Serial.println("Error reading UV.");
 
-  Serial.print("UVA:");
-  Serial.print(myUVSensor.measures.uva);
-  Serial.print(" UVB:");
-  Serial.print(myUVSensor.measures.uvb);
-  Serial.print(" UVC:");
-  Serial.println(myUVSensor.measures.uvc);
+//   Serial.print("UVA:");
+//   Serial.print(myUVSensor.measures.uva);
+//   Serial.print(" UVB:");
+//   Serial.print(myUVSensor.measures.uvb);
+//   Serial.print(" UVC:");
+//   Serial.println(myUVSensor.measures.uvc);
 
-  delay(2000);
+//   delay(2000);
 
-};
+// };