Merge pull request #49 from sparkfun/MoveExamples

Move examples

Author: oclyke

libraries/Examples/examples/Advanced/EEPROM_GetPut/EEPROM_GetPut.ino renamed to libraries/EEPROM/examples/Example1_GetPut/Example1_GetPut.ino

@@ -5,18 +5,24 @@
  This example demonstrates how to use millis() and micros()
 */
 
-void setup() {
+void setup()
+{
 
   Serial.begin(9600);
 
-  while(!Serial){}; //Wait for user to open terminal window
+  while (!Serial)
+  {
+  }; //Wait for user to open terminal window
 
-  Serial.println("SparkFun Arduino Apollo3 STimer Example");
+  Serial.println("SparkFun Arduino Apollo3 Delay Example");
   Serial.printf("Compiled on %s, %s\n\n", __DATE__, __TIME__);
 }
 
 void loop()
 {
   Serial.printf("Sec: %d, millis: %d, micros: %d, systicks: 0x%08X, sysoverflows: 0x%08X\n", secs(), millis(), micros(), systicks(), sysoverflows());
-  delay(1111); //Arbitrary delay
-}
+
+  delay(1111); //Arbitrary millisecond delay
+
+  delayMicroseconds(50); //Arbitrary microsecond delay
+}

libraries/EEPROM/examples/Apollo_EEPROM/Apollo_EEPROM.ino renamed to libraries/EEPROM/examples/Example2_AllFunctions/Example2_AllFunctions.ino

@@ -18,41 +18,48 @@ The edge-based interrupts will clear the flag automatically.
 static uint32_t count = 0;
 bool interruptsEnabled = false;
 
-void setup() {
+void setup()
+{
   // put your setup code here, to run once:
 
   Serial.begin(9600);
   Serial.println("Interrupt testing");
 
   pinMode(INT_PIN, INPUT_PULLUP);
-  
+
   attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, RISING);
-//  attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, FALLING);
-//  attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, LOW);
-//  attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, HIGH);
+  //  attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, FALLING);
+  //  attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, LOW);
+  //  attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, HIGH);
+  //  attachInterrupt(digitalPinToInterrupt(INT_PIN), myISR, CHANGE);
 
-//  // attaching a different interrupt to the same pin overwrites the existing ISR
-//  attachInterruptArg(digitalPinToInterrupt(INT_PIN), myISRArg, &count, RISING);
+  //  // attaching a different interrupt to the same pin overwrites the existing ISR
+  //  attachInterruptArg(digitalPinToInterrupt(INT_PIN), myISRArg, &count, RISING);
 
   interruptsEnabled = true;
 }
 
-void loop() {
+void loop()
+{
   count++;
-  if( count > 5 ){
-    if(interruptsEnabled){
+  if (count > 5)
+  {
+    if (interruptsEnabled)
+    {
       detachInterrupt(digitalPinToInterrupt(INT_PIN));
       interruptsEnabled = false;
     }
   }
   delay(1000);
 }
 
-void myISR( void ){
+void myISR(void)
+{
   Serial.println("Hi i am an ISR!");
 }
 
-void myISRArg( void* arg ){
-  uint32_t* local_count = (uint32_t*)arg;
-  Serial.printf("The time is %d seconds\n", *(local_count) );
+void myISRArg(void *arg)
+{
+  uint32_t *local_count = (uint32_t *)arg;
+  Serial.printf("The time is %d seconds\n", *(local_count));
 }