test: remove extraneous #[allow(clippy::uninlined_format_args)]

These were probably added automatically to avoid code churn. I'd like to
get rid of them bit by bit, so here's the first bit

Author: ada4a

tests/ui-toml/conf_deprecated_key/conf_deprecated_key.rs

@@ -1,5 +1,3 @@
-#![allow(clippy::uninlined_format_args)]
-
 fn main() {}
 
 #[warn(clippy::cognitive_complexity)]
@@ -8,7 +6,7 @@ fn cognitive_complexity() {
     let x = vec![1, 2, 3];
     for i in x {
         if i == 1 {
-            println!("{}", i);
+            println!("{i}");
         }
     }
 }

tests/ui-toml/conf_deprecated_key/conf_deprecated_key.stderr

@@ -11,7 +11,7 @@ LL | blacklisted-names = [ "..", "wibble" ]
    | ^^^^^^^^^^^^^^^^^
 
 error: the function has a cognitive complexity of (3/2)
-  --> tests/ui-toml/conf_deprecated_key/conf_deprecated_key.rs:6:4
+  --> tests/ui-toml/conf_deprecated_key/conf_deprecated_key.rs:4:4
    |
 LL | fn cognitive_complexity() {
    |    ^^^^^^^^^^^^^^^^^^^^

tests/ui-toml/max_suggested_slice_pattern_length/index_refutable_slice.fixed

@@ -1,4 +1,3 @@
-#![allow(clippy::uninlined_format_args)]
 #![deny(clippy::index_refutable_slice)]
 
 fn below_limit() {

tests/ui-toml/max_suggested_slice_pattern_length/index_refutable_slice.rs

@@ -1,4 +1,3 @@
-#![allow(clippy::uninlined_format_args)]
 #![deny(clippy::index_refutable_slice)]
 
 fn below_limit() {

tests/ui-toml/max_suggested_slice_pattern_length/index_refutable_slice.stderr

@@ -1,11 +1,11 @@
 error: this binding can be a slice pattern to avoid indexing
-  --> tests/ui-toml/max_suggested_slice_pattern_length/index_refutable_slice.rs:6:17
+  --> tests/ui-toml/max_suggested_slice_pattern_length/index_refutable_slice.rs:5:17
    |
 LL |     if let Some(slice) = slice {
    |                 ^^^^^
    |
 note: the lint level is defined here
-  --> tests/ui-toml/max_suggested_slice_pattern_length/index_refutable_slice.rs:2:9
+  --> tests/ui-toml/max_suggested_slice_pattern_length/index_refutable_slice.rs:1:9
    |
 LL | #![deny(clippy::index_refutable_slice)]
    |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

tests/ui/bind_instead_of_map.fixed

@@ -1,5 +1,4 @@
 #![deny(clippy::bind_instead_of_map)]
-#![allow(clippy::uninlined_format_args)]
 
 // need a main anyway, use it get rid of unused warnings too
 pub fn main() {

tests/ui/bind_instead_of_map.rs

@@ -1,5 +1,4 @@
 #![deny(clippy::bind_instead_of_map)]
-#![allow(clippy::uninlined_format_args)]
 
 // need a main anyway, use it get rid of unused warnings too
 pub fn main() {

tests/ui/bind_instead_of_map.stderr

@@ -1,5 +1,5 @@
 error: using `Option.and_then(Some)`, which is a no-op
-  --> tests/ui/bind_instead_of_map.rs:8:13
+  --> tests/ui/bind_instead_of_map.rs:7:13
    |
 LL |     let _ = x.and_then(Some);
    |             ^^^^^^^^^^^^^^^^ help: use the expression directly: `x`
@@ -11,13 +11,13 @@ LL | #![deny(clippy::bind_instead_of_map)]
    |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 error: using `Option.and_then(|x| Some(y))`, which is more succinctly expressed as `map(|x| y)`
-  --> tests/ui/bind_instead_of_map.rs:10:13
+  --> tests/ui/bind_instead_of_map.rs:9:13
    |
 LL |     let _ = x.and_then(|o| Some(o + 1));
    |             ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `x.map(|o| o + 1)`
 
 error: using `Result.and_then(Ok)`, which is a no-op
-  --> tests/ui/bind_instead_of_map.rs:17:13
+  --> tests/ui/bind_instead_of_map.rs:16:13
    |
 LL |     let _ = x.and_then(Ok);
    |             ^^^^^^^^^^^^^^ help: use the expression directly: `x`

tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs

@@ -1,6 +1,5 @@
 #![deny(clippy::branches_sharing_code, clippy::if_same_then_else)]
 #![allow(dead_code)]
-#![allow(clippy::uninlined_format_args)]
 //@no-rustfix
 // branches_sharing_code at the top and bottom of the if blocks
 
@@ -70,7 +69,7 @@ fn complexer_example() {
         let b = 0xffff00ff;
         let e_id = gen_id(a, b);
 
-        println!("From the a `{}` to the b `{}`", a, b);
+        println!("From the a `{a}` to the b `{b}`");
 
         let pack = DataPack {
             id: e_id,
@@ -83,7 +82,7 @@ fn complexer_example() {
         let b = 0xffff00ff;
         let e_id = gen_id(a, b);
 
-        println!("The new ID is '{}'", e_id);
+        println!("The new ID is '{e_id}'");
 
         let pack = DataPack {
             id: e_id,

tests/ui/branches_sharing_code/shared_at_top_and_bottom.stderr

@@ -1,5 +1,5 @@
 error: all if blocks contain the same code at both the start and the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:17:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:16:5
    |
 LL | /     if x == 7 {
 LL | |
@@ -10,7 +10,7 @@ LL | |         let _overlap_end = 2 * t;
    | |_________________________________^
    |
 note: this code is shared at the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:31:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:30:5
    |
 LL | /         let _u = 9;
 LL | |     }
@@ -34,7 +34,7 @@ LL +     let _u = 9;
    |
 
 error: all if blocks contain the same code at both the start and the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:35:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:34:5
    |
 LL | /     if x == 99 {
 LL | |
@@ -45,7 +45,7 @@ LL | |         let _overlap_middle = r * r;
    | |____________________________________^
    |
 note: this code is shared at the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:48:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:47:5
    |
 LL | /         let _overlap_end = r * r * r;
 LL | |         let z = "end";
@@ -67,7 +67,7 @@ LL +     let z = "end";
    |
 
 error: all if blocks contain the same code at both the start and the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:66:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:65:5
    |
 LL | /     if (x > 7 && y < 13) || (x + y) % 2 == 1 {
 LL | |
@@ -78,7 +78,7 @@ LL | |         let e_id = gen_id(a, b);
    | |________________________________^
    |
 note: this code is shared at the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:88:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:87:5
    |
 LL | /         let pack = DataPack {
 LL | |             id: e_id,
@@ -108,15 +108,15 @@ LL +     process_data(pack);
    |
 
 error: all if blocks contain the same code at both the start and the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:101:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:100:5
    |
 LL | /     let _ = if x == 7 {
 ...  |
 LL | |         let _ = 19;
    | |___________________^
    |
 note: this code is shared at the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:112:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:111:5
    |
 LL | /         x << 2
 LL | |     };
@@ -134,15 +134,15 @@ LL ~     x << 2;
    |
 
 error: all if blocks contain the same code at both the start and the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:115:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:114:5
    |
 LL | /     if x == 9 {
 ...  |
 LL | |         let _ = 17;
    | |___________________^
    |
 note: this code is shared at the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:126:5
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:125:5
    |
 LL | /         x * 4
 LL | |     }
@@ -160,15 +160,15 @@ LL +     x * 4
    |
 
 error: all if blocks contain the same code at both the start and the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:158:9
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:157:9
    |
 LL | /         if false {
 LL | |
 LL | |             let x = 1;
    | |______________________^
    |
 note: this code is shared at the end
-  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:166:9
+  --> tests/ui/branches_sharing_code/shared_at_top_and_bottom.rs:165:9
    |
 LL | /             let y = 1;
 LL | |         }