improve comments and docs

Signed-off-by: onur-ozkan <work@onurozkan.dev>

Author: onur-ozkan

src/bootstrap/defaults/bootstrap.library.toml

@@ -1,6 +1,5 @@
 # These defaults are meant for contributors to the standard library and documentation.
 [build]
-# When building the standard library, you almost never want to build the compiler itself.
 build-stage = 1
 test-stage = 1
 bench-stage = 1
@@ -10,8 +9,10 @@ bench-stage = 1
 incremental = true
 # Make the compiler and standard library faster to build, at the expense of a ~20% runtime slowdown.
 lto = "off"
-# Download rustc by default for library profile if compiler-affecting
-# directories are not modified. For CI this is disabled.
+# When building the standard library, you almost never want to build the compiler itself.
+#
+# If compiler-affecting directories are not modified, use precompiled rustc to speed up
+# library development by skipping compiler builds.
 download-rustc = "if-unchanged"
 
 [llvm]

src/bootstrap/src/core/build_steps/check.rs

@@ -66,7 +66,7 @@ impl Step for Std {
         let compiler = builder.compiler(builder.top_stage, builder.config.build);
 
         if builder.top_stage == 0 {
-            // Reuse the beta compiler's libstd
+            // Reuse the stage0 libstd
             builder.ensure(compile::Std::new(compiler, target));
             return;
         }

src/bootstrap/src/core/build_steps/compile.rs

@@ -1032,7 +1032,7 @@ impl Step for Rustc {
         let compiler = self.compiler;
         let target = self.target;
 
-        // NOTE: the ABI of the beta compiler is different from the ABI of the downloaded compiler,
+        // NOTE: the ABI of the stage0 compiler is different from the ABI of the downloaded compiler,
         // so its artifacts can't be reused.
         if builder.download_rustc() && compiler.stage != 0 {
             trace!(stage = compiler.stage, "`download_rustc` requested");
@@ -1787,9 +1787,9 @@ impl Step for Sysroot {
         t!(fs::create_dir_all(&sysroot));
 
         // In some cases(see https://github.com/rust-lang/rust/issues/109314), when the stage0
-        // compiler relies on more recent version of LLVM than the beta compiler, it may not
+        // compiler relies on more recent version of LLVM than the stage0 compiler, it may not
         // be able to locate the correct LLVM in the sysroot. This situation typically occurs
-        // when we upgrade LLVM version while the beta compiler continues to use an older version.
+        // when we upgrade LLVM version while the stage0 compiler continues to use an older version.
         //
         // Make sure to add the correct version of LLVM into the stage0 sysroot.
         if compiler.stage == 0 {

src/bootstrap/src/core/build_steps/test.rs

@@ -1570,7 +1570,7 @@ impl Step for Compiletest {
 
         if builder.top_stage == 0 && env::var("COMPILETEST_FORCE_STAGE0").is_err() {
             eprintln!("\
-ERROR: `--stage 0` runs compiletest on the beta compiler, not your local changes, and will almost always cause tests to fail
+ERROR: `--stage 0` runs compiletest on the stage0 (precompiled) compiler, not your local changes, and will almost always cause tests to fail
 HELP: to test the compiler, use `--stage 1` instead
 HELP: to test the standard library, use `--stage 0 library/std` instead
 NOTE: if you're sure you want to do this, please open an issue as to why. In the meantime, you can override this with `COMPILETEST_FORCE_STAGE0=1`."
@@ -1598,9 +1598,9 @@ NOTE: if you're sure you want to do this, please open an issue as to why. In the
         // NOTE: Only stage 1 is special cased because we need the rustc_private artifacts to match the
         // running compiler in stage 2 when plugins run.
         let (stage, stage_id) = if suite == "ui-fulldeps" && compiler.stage == 1 {
-            // At stage 0 (stage - 1) we are using the beta compiler. Using `self.target` can lead
-            // finding an incorrect compiler path on cross-targets, as the stage 0 beta compiler is
-            // always equal to `build.build` in the configuration.
+            // At stage 0 (stage - 1) we are using the stage0 compiler. Using `self.target` can lead
+            // finding an incorrect compiler path on cross-targets, as the stage 0 is always equal to
+            // `build.build` in the configuration.
             let build = builder.build.build;
             compiler = builder.compiler(compiler.stage - 1, build);
             let test_stage = compiler.stage + 1;
@@ -1694,7 +1694,7 @@ NOTE: if you're sure you want to do this, please open an issue as to why. In the
         }
 
         if mode == "rustdoc-json" {
-            // Use the beta compiler for jsondocck
+            // Use the stage0 compiler for jsondocck
             let json_compiler = compiler.with_stage(0);
             cmd.arg("--jsondocck-path")
                 .arg(builder.ensure(tool::JsonDocCk { compiler: json_compiler, target }).tool_path);

src/bootstrap/src/core/builder/tests.rs

@@ -394,7 +394,7 @@ mod defaults {
             first(cache.all::<tool::ErrorIndex>()),
             &[tool::ErrorIndex { compiler: Compiler::new(1, a) }]
         );
-        // docs should be built with the beta compiler, not with the stage0 artifacts.
+        // docs should be built with the stage0 compiler, not with the stage0 artifacts.
         // recall that rustdoc is off-by-one: `stage` is the compiler rustdoc is _linked_ to,
         // not the one it was built by.
         assert_eq!(

src/bootstrap/src/core/download.rs

@@ -662,7 +662,7 @@ impl Config {
             }
         };
 
-        // For the beta compiler, put special effort into ensuring the checksums are valid.
+        // For the stage0 compiler, put special effort into ensuring the checksums are valid.
         let checksum = if should_verify {
             let error = format!(
                 "src/stage0 doesn't contain a checksum for {url}. \

src/doc/rustc-dev-guide/src/building/bootstrapping/what-bootstrapping-does.md

@@ -66,13 +66,12 @@ The stage0 compiler is by default the very recent _beta_ `rustc` compiler and it
 associated dynamic libraries, which `./x.py` will download for you. (You can
 also configure `./x.py` to change stage0 to something else.)
 
-The stage0 compiler is then used only to compile [`src/bootstrap`] and [`compiler/rustc`].
-When assembling the libraries and binaries that will become the stage1 `rustc` compiler,
-the freshly compiled `rustc` and beta `std` are used.
+The precompiled stage0 compiler is then used only to compile [`src/bootstrap`] and [`compiler/rustc`]
+with precompiled stage0 std.
 
-Note that to build the stage1 compiler we use the precompiled beta compiler and beta std from stage0.
-Therefore, to use a compiler with a std that is freshly built from the tree, you need to build the
-stage2 compiler.
+Note that to build the stage1 compiler we use the precompiled stage0 compiler and std.
+Therefore, to use a compiler with a std that is freshly built from the tree, you need to
+build the stage2 compiler.
 
 There are two concepts at play here: a compiler (with its set of dependencies) and its
 'target' or 'object' libraries (`std` and `rustc`). Both are staged, but in a staggered manner.
@@ -87,7 +86,7 @@ The rustc source code is then compiled with the `stage0` compiler to produce the
 
 ### Stage 2: the truly current compiler
 
-We then rebuild our `stage1` compiler with in-tree std to produce the `stage2`
+We then rebuild the compiler using `stage1` compiler with in-tree std to produce the `stage2`
 compiler.
 
 The `stage1` compiler itself was built by precompiled `stage0` compiler and std
@@ -194,8 +193,8 @@ include, but are not limited to:
   without building `rustc` from source ('build with `stage0`, then test the
   artifacts'). If you're working on the standard library, this is normally the
   test command you want.
-- `./x build --stage 0` means to build with the beta `rustc`.
-- `./x doc --stage 0` means to document using the beta `rustdoc`.
+- `./x build --stage 0` means to build with the stage0 `rustc`.
+- `./x doc --stage 0` means to document using the stage0 `rustdoc`.
 
 #### Examples of what *not* to do
 
@@ -442,6 +441,6 @@ compiler itself uses to run. These aren't actually used by artifacts the new
 compiler generates. This step also copies the `rustc` and `rustdoc` binaries we
 generated into `build/$HOST/stage/bin`.
 
-The `stage1/bin/rustc` is a fully functional compiler built with the beta compiler and std.
-To use a compiler built entirely from source with the in-tree compiler and std, you need to build
-the stage2 compiler, which is compiled using the stage1 compiler and std.
+The `stage1/bin/rustc` is a fully functional compiler built with stage0 (precompiled) compiler and std.
+To use a compiler built entirely from source with the in-tree compiler and std, you need to build the
+stage2 compiler, which is compiled using the stage1 (in-tree) compiler and std.

src/doc/rustc-dev-guide/src/building/how-to-build-and-run.md

@@ -269,7 +269,6 @@ you will likely need to build at some point; for example, if you want
 to run the entire test suite).
 
 ```bash
-rustup toolchain link stage0 build/host/stage0-sysroot # beta compiler + beta std
 rustup toolchain link stage1 build/host/stage1
 rustup toolchain link stage2 build/host/stage2
 ```

src/doc/rustc-dev-guide/src/building/new-target.md

@@ -85,7 +85,7 @@ Look for existing targets to use as examples.
 After adding your target to the `rustc_target` crate you may want to add
 `core`, `std`, ... with support for your new target. In that case you will
 probably need access to some `target_*` cfg. Unfortunately when building with
-stage0 (the beta compiler), you'll get an error that the target cfg is
+stage0 (a precompiled compiler), you'll get an error that the target cfg is
 unexpected because stage0 doesn't know about the new target specification and
 we pass `--check-cfg` in order to tell it to check.
 

src/doc/rustc-dev-guide/src/building/suggested.md

@@ -273,51 +273,15 @@ lets you use `cargo fmt`.
 [the section on vscode]: suggested.md#configuring-rust-analyzer-for-rustc
 [the section on rustup]: how-to-build-and-run.md?highlight=rustup#creating-a-rustup-toolchain
 
-## Faster builds with `--keep-stage`.
-
-Sometimes just checking whether the compiler builds is not enough. A common
-example is that you need to add a `debug!` statement to inspect the value of
-some state or better understand the problem. In that case, you don't really need
-a full build. By bypassing bootstrap's cache invalidation, you can often get
-these builds to complete very fast (e.g., around 30 seconds). The only catch is
-this requires a bit of fudging and may produce compilers that don't work (but
-that is easily detected and fixed).
-
-The sequence of commands you want is as follows:
-
-- Initial build: `./x build library`
-  - As [documented previously], this will build a functional stage1 compiler as
-    part of running all stage0 commands (which include building a `std`
-    compatible with the stage1 compiler) as well as the first few steps of the
-    "stage 1 actions" up to "stage1 (sysroot stage1) builds std".
-- Subsequent builds: `./x build library --keep-stage 1`
-  - Note that we added the `--keep-stage 1` flag here
-
-[documented previously]: ./how-to-build-and-run.md#building-the-compiler
-
-As mentioned, the effect of `--keep-stage 1` is that we just _assume_ that the
-old standard library can be re-used. If you are editing the compiler, this is
-almost always true: you haven't changed the standard library, after all. But
-sometimes, it's not true: for example, if you are editing the "metadata" part of
-the compiler, which controls how the compiler encodes types and other states
-into the `rlib` files, or if you are editing things that wind up in the metadata
-(such as the definition of the MIR).
-
-**The TL;DR is that you might get weird behavior from a compile when using
-`--keep-stage 1`** -- for example, strange [ICEs](../appendix/glossary.html#ice)
-or other panics. In that case, you should simply remove the `--keep-stage 1`
-from the command and rebuild. That ought to fix the problem.
-
-You can also use `--keep-stage 1` when running tests. Something like this:
-
-- Initial test run: `./x test tests/ui`
-- Subsequent test run: `./x test tests/ui --keep-stage 1`
-
-### Iterating the standard library with `--keep-stage`
-
-If you are making changes to the standard library, you can use `./x build
---keep-stage 0 library` to iteratively rebuild the standard library without
-rebuilding the compiler.
+## Faster Builds with CI-rustc  
+
+If you are not working on the compiler, you often don't need to build the compiler tree.
+For example, you can skip building the compiler and only build the `library` tree or the
+tools under `src/tools`. To achieve that, you have to enable this by setting the `download-rustc`
+option in your configuration. This tells bootstrap to use the latest nightly compiler for `stage > 0`
+steps, meaning it will have two precompiled compilers: stage0 compiler and `download-rustc` compiler
+for `stage > 0` steps. This way, it will never need to build the in-tree compiler. As a result, your
+build time will be significantly reduced by not building the in-tree compiler.
 
 ## Using incremental compilation