From 0f42932fc73d07bc8576f1c2ec91beb0558e254f Mon Sep 17 00:00:00 2001 From: theschles Date: Fri, 25 Aug 2023 09:28:32 -0700 Subject: [PATCH] Update README.md to accurately state the situation The HyperPixel 2.1 is still being sold on the Pimoroni site -- and makes NO mention of being discontinued; instead it states: "We're working on full support for Bullseye, but if you're after an easy, fully featured Hyperpixel experience you should probably stick with Buster for now:" --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index d0b84ff..a383272 100644 --- a/README.md +++ b/README.md @@ -2,13 +2,13 @@ A high-resolution, high-speed 3.5" TFT display for your Raspberry Pi. -⚠ This 3.5" version of Hyperpixel is now **discontinued** - check out [Hyperpixel 4](https://shop.pimoroni.com/products/hyperpixel-4)! +For a rectangular version, check out [Hyperpixel 4](https://shop.pimoroni.com/products/hyperpixel-4)! ## Installing **Note:** The installer linked below will not work on **Pi 4**. Please use the pi4 branch here - https://github.com/pimoroni/hyperpixel/tree/pi4 . -In all cases, you will need to use the **legacy/Buster flavour of Raspberry Pi OS** (find it under 'Raspberry Pi OS (other)' in Raspberry Pi Imager). Bullseye and subsequent versions of Pi OS are not supported. +In all cases, you will need to use the **legacy/Buster flavour of Raspberry Pi OS** (find it under 'Raspberry Pi OS (other)' in Raspberry Pi Imager). The Bullseye version of Raspbian OS can be made to work with [small tweaks]{https://github.com/pimoroni/hyperpixel/issues/54}; [apparently there were some changes to drivers from the Buster-version to the Bullseye-version of Raspbian OS]{https://forums.raspberrypi.com/viewtopic.php?t=324640}. No word yet if those tweaks will work with the Bookworm version of Raspbian OS. Please note that [Buster's End OOf Life is scheduled for June 30, 2024]{https://wiki.debian.org/LTS}. ### Full install (recommended):