Support Raspberry Pi OS 64bit

[rsun0525]

pi@raspberrypi400:~ $ curl https://get.pimoroni.com/blinkt | bash

This hardware is not supported, sorry!
Config files have been left untouched

pi@raspberrypi400:~ $ uname -a
Linux raspberrypi400 5.10.11-v8+ #1399 SMP PREEMPT Thu Jan 28 12:14:03 GMT 2021 aarch64 GNU/Linux

[pixelchrome]

The manual install of the library works sudo apt-get install python3-blinkt

With that I was able to run rainbow.py from the Getting Started with Blinkt!

[Gadgetoid]

Looks like I'd better get my skates on and allow installs on 64bit - https://www.raspberrypi.com/news/raspberry-pi-os-64-bit/

[mahood73]

I've just installed this on a Pi 3B, with the official 64 bit OS.

I downloaded the script and removed the two tests that were failing:
arch_check() was reporting it as aarch64, so I changed the code to report it as armhf.
OS_NAME was reported as Debian, so I changed that code to report Raspbian.

The rest of the procedure was unchanged, and it works fine! So hopefully @Gadgetoid doesn't have a lot to do...

(edited to correct the architecture)

[Gadgetoid]

Thank you @mahood73 that's helpful.

I'm starting to wonder if the OS check is all that much use, since "Debian/aarch64" is pretty generic. It might just need ripping out. I'm tending toward less complicated installer scripts, since these are a legacy holdout from when I had a helping hand working on them and thus a nightmare to maintain.

[Gadgetoid]

I have unceremoniously deleted all OS, arch and system checks from the installers- inserting a slightly louder warning about running only on a Raspberry Pi. Hopefully this will get us away from the brick wall OS compat message to actually discovering if there are any incompatibilities (I doubt it.)

Installer should hopefully work now!

[Gadgetoid]

Hopefully I haven't regressed any of this in #102

[paulofrazao]

Any update on support for Pi 5 and 64bit?

[alphanumeric007]

WARNING Wall of text to follow!!
Latest Pi OS 64 bit on a Pi 4B
I got an example to run from command line.
Thonny just coughed up blink has no attribute... errors.
I have no idea what to do after you reboot to get an example to run?

pi@raspberrypi:~ $ python3 -m venv ~/my_virtual_env
pi@raspberrypi:~ $ source ~/my_virtual_env/bin/activate
(my_virtual_env) pi@raspberrypi:~ $ sudo apt install python3-dev
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
python3-dev is already the newest version (3.11.2-1+b1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
(my_virtual_env) pi@raspberrypi:~ $ pip install gpiod-2.0.1.tar.gz
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Processing ./gpiod-2.0.1.tar.gz
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Building wheels for collected packages: gpiod
Building wheel for gpiod (pyproject.toml) ... done
Created wheel for gpiod: filename=gpiod-2.0.1-cp311-cp311-linux_aarch64.whl size=93876 sha256=2459abc3eebecfea81ac658c847cd5ce2226fc2188e57ed7d35225d4169f3e19
Stored in directory: /home/pi/.cache/pip/wheels/88/37/59/bd1f565745b127d16180eb2475aba0b290cc4eaef2c34cde26
Successfully built gpiod
Installing collected packages: gpiod
Attempting uninstall: gpiod
Found existing installation: gpiod 2.0.1
Uninstalling gpiod-2.0.1:
Successfully uninstalled gpiod-2.0.1
Successfully installed gpiod-2.0.1
(my_virtual_env) pi@raspberrypi:~ $ git clone https://github.com/pimoroni/blinkt -b repackage
Cloning into 'blinkt'...
remote: Enumerating objects: 1425, done.
remote: Counting objects: 100% (243/243), done.
remote: Compressing objects: 100% (137/137), done.
remote: Total 1425 (delta 109), reused 184 (delta 78), pack-reused 1182
Receiving objects: 100% (1425/1425), 411.36 KiB | 3.49 MiB/s, done.
Resolving deltas: 100% (843/843), done.
(my_virtual_env) pi@raspberrypi:~ $ cd blinkt
(my_virtual_env) pi@raspberrypi:~/blinkt $ pip install .
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Processing /home/pi/blinkt
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Requirement already satisfied: gpiod in /home/pi/my_virtual_env/lib/python3.11/site-packages (from blinkt==0.1.2) (2.0.1)
Requirement already satisfied: gpiodevice>=0.0.2 in /home/pi/my_virtual_env/lib/python3.11/site-packages (from blinkt==0.1.2) (0.0.3)
Building wheels for collected packages: blinkt
Building wheel for blinkt (pyproject.toml) ... done
Created wheel for blinkt: filename=blinkt-0.1.2-py3-none-any.whl size=10539 sha256=c3e37203fe386081df943c7264b25ab7e022ed9954080f389f72c5cbbcf14271
Stored in directory: /tmp/pip-ephem-wheel-cache-h7e295u4/wheels/1f/15/39/e27ca04201b69df7270a606a5d1fc5d9ea73eccd561ad00e2c
Successfully built blinkt
Installing collected packages: blinkt
Attempting uninstall: blinkt
Found existing installation: blinkt 0.1.2
Uninstalling blinkt-0.1.2:
Successfully uninstalled blinkt-0.1.2
Successfully installed blinkt-0.1.2
(my_virtual_env) pi@raspberrypi:~/blinkt $ pip3 install .
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Processing /home/pi/blinkt
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Requirement already satisfied: gpiod in /home/pi/my_virtual_env/lib/python3.11/site-packages (from blinkt==0.1.2) (2.0.1)
Requirement already satisfied: gpiodevice>=0.0.2 in /home/pi/my_virtual_env/lib/python3.11/site-packages (from blinkt==0.1.2) (0.0.3)
Building wheels for collected packages: blinkt
Building wheel for blinkt (pyproject.toml) ... done
Created wheel for blinkt: filename=blinkt-0.1.2-py3-none-any.whl size=10539 sha256=c3e37203fe386081df943c7264b25ab7e022ed9954080f389f72c5cbbcf14271
Stored in directory: /tmp/pip-ephem-wheel-cache-ac2aklsj/wheels/1f/15/39/e27ca04201b69df7270a606a5d1fc5d9ea73eccd561ad00e2c
Successfully built blinkt
Installing collected packages: blinkt
Attempting uninstall: blinkt
Found existing installation: blinkt 0.1.2
Uninstalling blinkt-0.1.2:
Successfully uninstalled blinkt-0.1.2
Successfully installed blinkt-0.1.2
(my_virtual_env) pi@raspberrypi:~/blinkt $ cd examples
(my_virtual_env) pi@raspberrypi:~/blinkt/examples $ python3 cpu_temp.py

[thirdr]

Closed as original issue has been resolved.