[F1] Update STM32F1xx HAL Drivers to v1.1.4

Included in STM32CubeF1 FW V1.8.0

Note: Trailing spaces have been cleaned.

Signed-off-by: Frederic.Pillon <frederic.pillon@st.com>

Author: fpistm

system/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -1,6 +1,6 @@
 /**
   ******************************************************************************
-  * @file    stm32f1xx_hal_can_ex.h
+  * @file    stm32f1xx_hal_can_ex_legacy.h
   * @author  MCD Application Team
   * @brief   Header file of CAN HAL Extension module.
   ******************************************************************************
@@ -31,11 +31,11 @@
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_CAN_EX_H
-#define __STM32F1xx_HAL_CAN_EX_H
+#ifndef __STM32F1xx_HAL_CAN_EX_LEGACY_H
+#define __STM32F1xx_HAL_CAN_EX_LEGACY_H
 
 #ifdef __cplusplus
  extern "C" {
@@ -53,11 +53,11 @@
 
 /** @defgroup CANEx CANEx
   * @{
-  */ 
+  */
 
 /* Exported types ------------------------------------------------------------*/
 
-/** 
+/**
   * @brief  CAN filter configuration structure definition
   */
 /* CAN filter banks differences over STM32F1 devices:                         */
@@ -68,29 +68,29 @@ typedef struct
 {
   uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
                                        configuration, first one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
-                                              
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
   uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
                                        configuration, second one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
 
   uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
                                        according to the mode (MSBs for a 32-bit configuration,
                                        first one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
 
   uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
                                        according to the mode (LSBs for a 32-bit configuration,
                                        second one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
 
   uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
                                        This parameter can be a value of @ref CAN_filter_FIFO */
 #if defined(STM32F105xC) || defined(STM32F107xC)
-  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized. 
+  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized.
                                        This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
 #else
-  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized. 
+  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized.
                                        This parameter must be a number between Min_Data = 0 and Max_Data = 13. */
 #endif /* STM32F105xC || STM32F107xC */
   uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
@@ -101,10 +101,10 @@ typedef struct
 
   uint32_t FilterActivation;      /*!< Enable or disable the filter.
                                        This parameter can be set to ENABLE or DISABLE. */
-                                       
+
   uint32_t BankNumber;            /*!< Select the start slave bank filter
-                                       This parameter must be a number between Min_Data = 0 and Max_Data = 28. */ 
-  
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
+
 }CAN_FilterConfTypeDef;
 
 /* Exported constants --------------------------------------------------------*/
@@ -127,7 +127,7 @@ typedef struct
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
@@ -139,6 +139,6 @@ typedef struct
 }
 #endif
 
-#endif /* __STM32F1xx_HAL_CAN_EX_H */
+#endif /* __STM32F1xx_HAL_CAN_EX_LEGACY_H */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h

@@ -1,6 +1,6 @@
 /**
   ******************************************************************************
-  * @file    stm32f1xx_hal_can.h
+  * @file    stm32f1xx_hal_can_legacy.h
   * @author  MCD Application Team
   * @brief   Header file of CAN HAL module.
   ******************************************************************************
@@ -34,13 +34,13 @@
   */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_CAN_H
-#define __STM32F1xx_HAL_CAN_H
+#ifndef __STM32F1xx_HAL_CAN_LEGACY_H
+#define __STM32F1xx_HAL_CAN_LEGACY_H
 
 #ifdef __cplusplus
  extern "C" {
 #endif
-     
+
 #if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
     defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
 
@@ -121,8 +121,8 @@ typedef struct
                             This parameter can be set to ENABLE or DISABLE */
 }CAN_InitTypeDef;
 
-/** 
-  * @brief  CAN Tx message structure definition  
+/**
+  * @brief  CAN Tx message structure definition
   */
 typedef struct
 {
@@ -391,7 +391,7 @@ typedef struct
 #define CAN_FLAG_SLAK              ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAK_BIT_POSITION))   /*!< Sleep acknowledge flag */
 #define CAN_FLAG_SLAKI             ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAKI_BIT_POSITION))  /*!< Sleep acknowledge flag */
 
-/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. 
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
          In this case the SLAK bit can be polled.*/
 
 /* Error Flags */
@@ -654,7 +654,7 @@ typedef struct
   * @retval None.
   */
 #define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
-((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1)) 
+((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1))
 
 /**
   * @brief  Cancel a transmit request.
@@ -692,7 +692,7 @@ typedef struct
   */
 
 /** @addtogroup CAN_Exported_Functions_Group1
-  * @brief    Initialization and Configuration functions 
+  * @brief    Initialization and Configuration functions
   * @{
   */
 /* Initialization and de-initialization functions *****************************/
@@ -706,7 +706,7 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
   */
 
 /** @addtogroup CAN_Exported_Functions_Group2
-  * @brief    I/O operation functions 
+  * @brief    I/O operation functions
   * @{
   */
 /* I/O operation functions *****************************************************/
@@ -725,7 +725,7 @@ void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
   */
 
 /** @addtogroup CAN_Exported_Functions_Group3
-  * @brief   CAN Peripheral State functions 
+  * @brief   CAN Peripheral State functions
   * @{
   */
 /* Peripheral State and Error functions ***************************************/
@@ -790,7 +790,7 @@ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
 }
 #endif
 
-#endif /* __STM32F1xx_HAL_CAN_H */
+#endif /* __STM32F1xx_HAL_CAN_LEGACY_H */
 
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h

@@ -8,29 +8,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -50,15 +34,15 @@ extern "C" {
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed.
   *         If expr is true, it returns no value.
   * @retval None
   */
 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-void assert_failed(uint8_t *file, uint32_t line);
+void assert_failed(uint8_t* file, uint32_t line);
 #else
 #define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */

system/Drivers/STM32F1xx_HAL_Driver/Inc/stm32_assert_template.h

@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -319,13 +303,19 @@ void HAL_ResumeTick(void);
 uint32_t HAL_GetHalVersion(void);
 uint32_t HAL_GetREVID(void);
 uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
 void HAL_DBGMCU_EnableDBGSleepMode(void);
 void HAL_DBGMCU_DisableDBGSleepMode(void);
 void HAL_DBGMCU_EnableDBGStopMode(void);
 void HAL_DBGMCU_DisableDBGStopMode(void);
 void HAL_DBGMCU_EnableDBGStandbyMode(void);
 void HAL_DBGMCU_DisableDBGStandbyMode(void);
-void HAL_GetUID(uint32_t *UID);
+/**
+  * @}
+  */
+
 /**
   * @}
   */