MPAE-12074 Update main.json file. Update Readme.md file. Add MPLAB code to bitbucket

Author: jams100000-MCHP

.main-meta/main.json

@@ -4,7 +4,7 @@
     "content": {
         "metaDataVersion": "1.1.0",
         "name": "com.microchip.mcu8.mplabx.project.pic18f57q43-analog-read-serial-write-mplab-mcc",
-        "version": " ",
+        "version": "1.0.0",
         "displayName": "Analog Read Serial Write",
         "projectName": "pic18f57q43-analog-read-serial-write-mplab-mcc",
         "shortDescription": "This code example uses the ADC module to do an analog read and display it using the Data Visualizer.",
@@ -19,12 +19,12 @@
             }
         ],
         "dfp": {
-            "name": "",
-            "semverRange": ""
+            "name": "PIC18F-Q_DFP",
+            "semverRange": "^1.11.185"
         },
         "configurator": {
-            "name": "",
-            "semverRange": ""
+            "name": "MCC",
+            "semverRange": ">=4.1.0"
         },
         "device": {
             "metaDataVersion": "1.0.0",
@@ -37,9 +37,9 @@
             }
         },
         "author": "Jamus Griego",
-        "subcategories": [],
-        "peripherals": [],
-        "keywords": [],
+        "subcategories": ["MCC"],
+        "peripherals": ["ADCC", "UART", "TMR1"],
+        "keywords": ["Data Visualizer", "Data Streamer"],
         "additionalData": {
             "longDescription": {
                 "metaDataVersion": "1.0.0",

PIC18F57Q43-analog-read-serial-write-mplab-mcc.X/Makefile

@@ -0,0 +1,113 @@
+#
+#  There exist several targets which are by default empty and which can be 
+#  used for execution of your targets. These targets are usually executed 
+#  before and after some main targets. They are: 
+#
+#     .build-pre:              called before 'build' target
+#     .build-post:             called after 'build' target
+#     .clean-pre:              called before 'clean' target
+#     .clean-post:             called after 'clean' target
+#     .clobber-pre:            called before 'clobber' target
+#     .clobber-post:           called after 'clobber' target
+#     .all-pre:                called before 'all' target
+#     .all-post:               called after 'all' target
+#     .help-pre:               called before 'help' target
+#     .help-post:              called after 'help' target
+#
+#  Targets beginning with '.' are not intended to be called on their own.
+#
+#  Main targets can be executed directly, and they are:
+#  
+#     build                    build a specific configuration
+#     clean                    remove built files from a configuration
+#     clobber                  remove all built files
+#     all                      build all configurations
+#     help                     print help mesage
+#  
+#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
+#  .help-impl are implemented in nbproject/makefile-impl.mk.
+#
+#  Available make variables:
+#
+#     CND_BASEDIR                base directory for relative paths
+#     CND_DISTDIR                default top distribution directory (build artifacts)
+#     CND_BUILDDIR               default top build directory (object files, ...)
+#     CONF                       name of current configuration
+#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
+#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
+#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
+#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
+#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
+#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
+#
+# NOCDDL
+
+
+# Environment 
+MKDIR=mkdir
+CP=cp
+CCADMIN=CCadmin
+RANLIB=ranlib
+
+
+# build
+build: .build-post
+
+.build-pre:
+# Add your pre 'build' code here...
+
+.build-post: .build-impl
+# Add your post 'build' code here...
+
+
+# clean
+clean: .clean-post
+
+.clean-pre:
+# Add your pre 'clean' code here...
+# WARNING: the IDE does not call this target since it takes a long time to
+# simply run make. Instead, the IDE removes the configuration directories
+# under build and dist directly without calling make.
+# This target is left here so people can do a clean when running a clean
+# outside the IDE.
+
+.clean-post: .clean-impl
+# Add your post 'clean' code here...
+
+
+# clobber
+clobber: .clobber-post
+
+.clobber-pre:
+# Add your pre 'clobber' code here...
+
+.clobber-post: .clobber-impl
+# Add your post 'clobber' code here...
+
+
+# all
+all: .all-post
+
+.all-pre:
+# Add your pre 'all' code here...
+
+.all-post: .all-impl
+# Add your post 'all' code here...
+
+
+# help
+help: .help-post
+
+.help-pre:
+# Add your pre 'help' code here...
+
+.help-post: .help-impl
+# Add your post 'help' code here...
+
+
+
+# include project implementation makefile
+include nbproject/Makefile-impl.mk
+
+# include project make variables
+include nbproject/Makefile-variables.mk

PIC18F57Q43-analog-read-serial-write-mplab-mcc.X/PIC18F57Q43-adcc-serial-mplab-mcc.mc3

@@ -0,0 +1,57 @@
+/*
+Copyright (c) [2012-2020] Microchip Technology Inc.  
+
+    All rights reserved.
+
+    You are permitted to use the accompanying software and its derivatives 
+    with Microchip products. See the Microchip license agreement accompanying 
+    this software, if any, for additional info regarding your rights and 
+    obligations.
+    
+    MICROCHIP SOFTWARE AND DOCUMENTATION ARE PROVIDED "AS IS" WITHOUT 
+    WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT 
+    LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE, NON-INFRINGEMENT 
+    AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP OR ITS
+    LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT, NEGLIGENCE, STRICT 
+    LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER LEGAL EQUITABLE 
+    THEORY FOR ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES INCLUDING BUT NOT 
+    LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, 
+    OR OTHER SIMILAR COSTS. 
+    
+    To the fullest extend allowed by law, Microchip and its licensors 
+    liability will not exceed the amount of fees, if any, that you paid 
+    directly to Microchip to use this software. 
+    
+    THIRD PARTY SOFTWARE:  Notwithstanding anything to the contrary, any 
+    third party software accompanying this software is subject to the terms 
+    and conditions of the third party's license agreement.  To the extent 
+    required by third party licenses covering such third party software, 
+    the terms of such license will apply in lieu of the terms provided in 
+    this notice or applicable license.  To the extent the terms of such 
+    third party licenses prohibit any of the restrictions described here, 
+    such restrictions will not apply to such third party software.
+ */
+#include "mcc_generated_files/system/system.h"
+#include "mcc_generated_files/data_streamer/data_streamer.h" // Issue #2 - header file eaither needs to be incldued here or within the system.h file for you to be able to call function in main.c
+
+/*
+    Main application
+ */
+
+int main(void) {
+    SYSTEM_Initialize();
+    ADPCH = POT; // Set ADC Positive Channel to POT (RA0);
+    Timer1_Start(); // Start Timer1 (ADC AutoConversion Trigger);
+    uint16_t measurement;
+
+    while (1) {
+
+        // Timer1 Overflow will trigger ADC conversion by setting ADGO in hardware; 
+
+        while (ADCON0bits.ADGO); // Wait here while ADC conversion and calculation is in progress;
+        //printf("ADC Result %d \r\n", ADCC_GetFilterValue());
+
+        variableWrite_sendFrame(ADCC_GetFilterValue());
+        while (!ADCON0bits.ADGO); // Wait here until Timer1 triggers ADGO again;
+    }
+}