Merge tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.10:

- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
  immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
  SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
  doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
  the SOM dtsi.

* tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
  arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
  arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
  arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
  arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
  arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
  arm64: dts: freescale: imx8mm-verdin: Fix GPU speed

Link: https://lore.kernel.org/r/Zm+xVUmFtaOnYBb4@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Author: arndb

arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi

@@ -85,7 +85,7 @@
 		};
 	};
 
-	panel {
+	panel_dpi: panel {
 		compatible = "sii,43wvf1g";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display_power>;

arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso

@@ -10,8 +10,6 @@
 /plugin/;
 
 &{/} {
-	/delete-node/ panel;
-
 	hdmi: connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -82,6 +80,10 @@
 	};
 };
 
+&panel_dpi {
+	status = "disabled";
+};
+
 &tve {
 	status = "disabled";
 };

arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi

@@ -6,6 +6,7 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
 
 / {
 	chosen {
@@ -935,7 +936,7 @@
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */

arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi

@@ -254,7 +254,7 @@
 				  <&clk IMX8MP_CLK_CLKOUT2>,
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
 		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 

arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi

@@ -219,7 +219,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 

arch/arm64/boot/dts/freescale/imx8qm-mek.dts

@@ -36,7 +36,7 @@
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 

arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts

@@ -296,7 +296,6 @@
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };