Create README.md

Author: Bluelightning26

hackpads/BluPad/README.md

@@ -0,0 +1,26 @@
+
+
+This was unlike anything I have undertaken before and I do not know if my HackPad has all the necessary components. 
+I had many challenges that I had to persevere through while attempting to make my own 
+macropad. At this point in time while it very possibly does not work in it's current form
+but I am proud of what I have accomplished so far. 
+The first hurdle occured in KiCad where no matter how many times I imported the OPL + SEEED libraries I never got the same footprint as the tutorials so I had to
+figure out how to use a similar one.
+Then in KiCad the right menu bar dissapeared (idk why / how) and I couldn't find anywhere online how to make it appear. The elements on the PCB editor was barely visable and 
+I finally got help in the Slack today on how to fix it (this set me back multiple days).
+The libraries still didn't import the 3d render of the Xiao in the viewer but I think I can solder it on. 
+Routing the copper wires from the ratsnest and organizing the layout was pretty fun :) !
+Fusion was unfortunately very slow and took roughly an hour just to get downloaded and setup on my laptop (Fusion is just slow- I didn't do anything)
+Even through this all, for my first attempt at ever designing a PCB I do not think I did too bad.
+This has got me interested in hardware based projects and I am definitely planning on using the Onboard grant soon.
+
+
+![](https://cdn.hack.pet/slackcdn/9925e942fea228bc5d1dfbb328f476ac.png)
+![](https://cdn.hackclubber.dev/slackcdn/24457aabfe11c958d2ddef725ccffa1c.png)
+![](https://cdn.hackclubber.dev/slackcdn/c2d1ef55e18a314f70a79a06218c1f0d.png)
+BOM
+---
+1. 9 Cherry MX Switches
+2. Rotary Switch Encoder
+3. Keycaps!
+4. Xiao Seeed rp2040