Merge branch 'ds/maintenance-part-3'

Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.

* ds/maintenance-part-3:
  maintenance: add troubleshooting guide to docs
  maintenance: use 'incremental' strategy by default
  maintenance: create maintenance.strategy config
  maintenance: add start/stop subcommands
  maintenance: add [un]register subcommands
  for-each-repo: run subcommands on configured repos
  maintenance: add --schedule option and config
  maintenance: optionally skip --auto process

Author: gitster

.gitignore

@@ -67,6 +67,7 @@
 /git-filter-branch
 /git-fmt-merge-msg
 /git-for-each-ref
+/git-for-each-repo
 /git-format-patch
 /git-fsck
 /git-fsck-objects

Documentation/config/maintenance.txt

@@ -1,10 +1,35 @@
+maintenance.auto::
+	This boolean config option controls whether some commands run
+	`git maintenance run --auto` after doing their normal work. Defaults
+	to true.
+
+maintenance.strategy::
+	This string config option provides a way to specify one of a few
+	recommended schedules for background maintenance. This only affects
+	which tasks are run during `git maintenance run --schedule=X`
+	commands, provided no `--task=<task>` arguments are provided.
+	Further, if a `maintenance.<task>.schedule` config value is set,
+	then that value is used instead of the one provided by
+	`maintenance.strategy`. The possible strategy strings are:
++
+* `none`: This default setting implies no task are run at any schedule.
+* `incremental`: This setting optimizes for performing small maintenance
+  activities that do not delete any data. This does not schedule the `gc`
+  task, but runs the `prefetch` and `commit-graph` tasks hourly and the
+  `loose-objects` and `incremental-repack` tasks daily.
+
 maintenance.<task>.enabled::
 	This boolean config option controls whether the maintenance task
 	with name `<task>` is run when no `--task` option is specified to
 	`git maintenance run`. These config values are ignored if a
 	`--task` option exists. By default, only `maintenance.gc.enabled`
 	is true.
 
+maintenance.<task>.schedule::
+	This config option controls whether or not the given `<task>` runs
+	during a `git maintenance run --schedule=<frequency>` command. The
+	value must be one of "hourly", "daily", or "weekly".
+
 maintenance.commit-graph.auto::
 	This integer config option controls how often the `commit-graph` task
 	should be run as part of `git maintenance run --auto`. If zero, then

Documentation/git-for-each-repo.txt

@@ -0,0 +1,59 @@
+git-for-each-repo(1)
+====================
+
+NAME
+----
+git-for-each-repo - Run a Git command on a list of repositories
+
+
+SYNOPSIS
+--------
+[verse]
+'git for-each-repo' --config=<config> [--] <arguments>
+
+
+DESCRIPTION
+-----------
+Run a Git command on a list of repositories. The arguments after the
+known options or `--` indicator are used as the arguments for the Git
+subprocess.
+
+THIS COMMAND IS EXPERIMENTAL. THE BEHAVIOR MAY CHANGE.
+
+For example, we could run maintenance on each of a list of repositories
+stored in a `maintenance.repo` config variable using
+
+-------------
+git for-each-repo --config=maintenance.repo maintenance run
+-------------
+
+This will run `git -C <repo> maintenance run` for each value `<repo>`
+in the multi-valued config variable `maintenance.repo`.
+
+
+OPTIONS
+-------
+--config=<config>::
+	Use the given config variable as a multi-valued list storing
+	absolute path names. Iterate on that list of paths to run
+	the given arguments.
++
+These config values are loaded from system, global, and local Git config,
+as available. If `git for-each-repo` is run in a directory that is not a
+Git repository, then only the system and global config is used.
+
+
+SUBPROCESS BEHAVIOR
+-------------------
+
+If any `git -C <repo> <arguments>` subprocess returns a non-zero exit code,
+then the `git for-each-repo` process returns that exit code without running
+more subprocesses.
+
+Each `git -C <repo> <arguments>` subprocess inherits the standard file
+descriptors `stdin`, `stdout`, and `stderr`.
+
+
+GIT
+---
+Part of the linkgit:git[1] suite

Documentation/git-maintenance.txt

@@ -29,13 +29,55 @@ Git repository.
 SUBCOMMANDS
 -----------
 
+register::
+	Initialize Git config values so any scheduled maintenance will
+	start running on this repository. This adds the repository to the
+	`maintenance.repo` config variable in the current user's global
+	config and enables some recommended configuration values for
+	`maintenance.<task>.schedule`. The tasks that are enabled are safe
+	for running in the background without disrupting foreground
+	processes.
++
+The `register` subcomand will also set the `maintenance.strategy` config
+value to `incremental`, if this value is not previously set. The
+`incremental` strategy uses the following schedule for each maintenance
+task:
++
+--
+* `gc`: disabled.
+* `commit-graph`: hourly.
+* `prefetch`: hourly.
+* `loose-objects`: daily.
+* `incremental-repack`: daily.
+--
++
+`git maintenance register` will also disable foreground maintenance by
+setting `maintenance.auto = false` in the current repository. This config
+setting will remain after a `git maintenance unregister` command.
+
 run::
 	Run one or more maintenance tasks. If one or more `--task` options
 	are specified, then those tasks are run in that order. Otherwise,
 	the tasks are determined by which `maintenance.<task>.enabled`
 	config options are true. By default, only `maintenance.gc.enabled`
 	is true.
 
+start::
+	Start running maintenance on the current repository. This performs
+	the same config updates as the `register` subcommand, then updates
+	the background scheduler to run `git maintenance run --scheduled`
+	on an hourly basis.
+
+stop::
+	Halt the background maintenance schedule. The current repository
+	is not removed from the list of maintained repositories, in case
+	the background maintenance is restarted later.
+
+unregister::
+	Remove the current repository from background maintenance. This
+	only removes the repository from the configured list. It does not
+	stop the background maintenance processes from running.
+
 TASKS
 -----
 
@@ -110,7 +152,18 @@ OPTIONS
 	only if certain thresholds are met. For example, the `gc` task
 	runs when the number of loose objects exceeds the number stored
 	in the `gc.auto` config setting, or when the number of pack-files
-	exceeds the `gc.autoPackLimit` config setting.
+	exceeds the `gc.autoPackLimit` config setting. Not compatible with
+	the `--schedule` option.
+
+--schedule::
+	When combined with the `run` subcommand, run maintenance tasks
+	only if certain time conditions are met, as specified by the
+	`maintenance.<task>.schedule` config value for each `<task>`.
+	This config value specifies a number of seconds since the last
+	time that task ran, according to the `maintenance.<task>.lastRun`
+	config value. The tasks that are tested are those provided by
+	the `--task=<task>` option(s) or those with
+	`maintenance.<task>.enabled` set to true.
 
 --quiet::
 	Do not report progress or other information over `stderr`.
@@ -122,6 +175,50 @@ OPTIONS
 	`maintenance.<task>.enabled` configured as `true` are considered.
 	See the 'TASKS' section for the list of accepted `<task>` values.
 
+
+TROUBLESHOOTING
+---------------
+The `git maintenance` command is designed to simplify the repository
+maintenance patterns while minimizing user wait time during Git commands.
+A variety of configuration options are available to allow customizing this
+process. The default maintenance options focus on operations that complete
+quickly, even on large repositories.
+
+Users may find some cases where scheduled maintenance tasks do not run as
+frequently as intended. Each `git maintenance run` command takes a lock on
+the repository's object database, and this prevents other concurrent
+`git maintenance run` commands from running on the same repository. Without
+this safeguard, competing processes could leave the repository in an
+unpredictable state.
+
+The background maintenance schedule runs `git maintenance run` processes
+on an hourly basis. Each run executes the "hourly" tasks. At midnight,
+that process also executes the "daily" tasks. At midnight on the first day
+of the week, that process also executes the "weekly" tasks. A single
+process iterates over each registered repository, performing the scheduled
+tasks for that frequency. Depending on the number of registered
+repositories and their sizes, this process may take longer than an hour.
+In this case, multiple `git maintenance run` commands may run on the same
+repository at the same time, colliding on the object database lock. This
+results in one of the two tasks not running.
+
+If you find that some maintenance windows are taking longer than one hour
+to complete, then consider reducing the complexity of your maintenance
+tasks. For example, the `gc` task is much slower than the
+`incremental-repack` task. However, this comes at a cost of a slightly
+larger object database. Consider moving more expensive tasks to be run
+less frequently.
+
+Expert users may consider scheduling their own maintenance tasks using a
+different schedule than is available through `git maintenance start` and
+Git configuration options. These users should be aware of the object
+database lock and how concurrent `git maintenance run` commands behave.
+Further, the `git gc` command should not be combined with
+`git maintenance run` commands. `git gc` modifies the object database
+but does not take the lock in the same way as `git maintenance run`. If
+possible, use `git maintenance run --task=gc` instead of `git gc`.
+
+
 GIT
 ---
 Part of the linkgit:git[1] suite

Makefile

@@ -694,6 +694,7 @@ TEST_BUILTINS_OBJS += test-advise.o
 TEST_BUILTINS_OBJS += test-bloom.o
 TEST_BUILTINS_OBJS += test-chmtime.o
 TEST_BUILTINS_OBJS += test-config.o
+TEST_BUILTINS_OBJS += test-crontab.o
 TEST_BUILTINS_OBJS += test-ctype.o
 TEST_BUILTINS_OBJS += test-date.o
 TEST_BUILTINS_OBJS += test-delta.o
@@ -1089,6 +1090,7 @@ BUILTIN_OBJS += builtin/fetch-pack.o
 BUILTIN_OBJS += builtin/fetch.o
 BUILTIN_OBJS += builtin/fmt-merge-msg.o
 BUILTIN_OBJS += builtin/for-each-ref.o
+BUILTIN_OBJS += builtin/for-each-repo.o
 BUILTIN_OBJS += builtin/fsck.o
 BUILTIN_OBJS += builtin/gc.o
 BUILTIN_OBJS += builtin/get-tar-commit-id.o

builtin.h

@@ -155,6 +155,7 @@ int cmd_fetch(int argc, const char **argv, const char *prefix);
 int cmd_fetch_pack(int argc, const char **argv, const char *prefix);
 int cmd_fmt_merge_msg(int argc, const char **argv, const char *prefix);
 int cmd_for_each_ref(int argc, const char **argv, const char *prefix);
+int cmd_for_each_repo(int argc, const char **argv, const char *prefix);
 int cmd_format_patch(int argc, const char **argv, const char *prefix);
 int cmd_fsck(int argc, const char **argv, const char *prefix);
 int cmd_gc(int argc, const char **argv, const char *prefix);

builtin/for-each-repo.c

@@ -0,0 +1,58 @@
+#include "cache.h"
+#include "config.h"
+#include "builtin.h"
+#include "parse-options.h"
+#include "run-command.h"
+#include "string-list.h"
+
+static const char * const for_each_repo_usage[] = {
+	N_("git for-each-repo --config=<config> <command-args>"),
+	NULL
+};
+
+static int run_command_on_repo(const char *path,
+			       void *cbdata)
+{
+	int i;
+	struct child_process child = CHILD_PROCESS_INIT;
+	struct strvec *args = (struct strvec *)cbdata;
+
+	child.git_cmd = 1;
+	strvec_pushl(&child.args, "-C", path, NULL);
+
+	for (i = 0; i < args->nr; i++)
+		strvec_push(&child.args, args->v[i]);
+
+	return run_command(&child);
+}
+
+int cmd_for_each_repo(int argc, const char **argv, const char *prefix)
+{
+	static const char *config_key = NULL;
+	int i, result = 0;
+	const struct string_list *values;
+	struct strvec args = STRVEC_INIT;
+
+	const struct option options[] = {
+		OPT_STRING(0, "config", &config_key, N_("config"),
+			   N_("config key storing a list of repository paths")),
+		OPT_END()
+	};
+
+	argc = parse_options(argc, argv, prefix, options, for_each_repo_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+
+	if (!config_key)
+		die(_("missing --config=<config>"));
+
+	for (i = 0; i < argc; i++)
+		strvec_push(&args, argv[i]);
+
+	values = repo_config_get_value_multi(the_repository,
+					     config_key);
+
+	for (i = 0; !result && i < values->nr; i++)
+		result = run_command_on_repo(values->items[i].string, &args);
+
+	return result;
+}