ci(pre-commit): Apply automatic fixes

Author: pre-commit-ci-lite[bot]

cores/esp32/esp32-hal-periman.h

@@ -79,14 +79,14 @@ typedef enum {
   ESP32_BUS_TYPE_SPI_MASTER_SS,    // IO is used as SPI master SS pin
 #endif
 #if SOC_SDMMC_HOST_SUPPORTED
-  ESP32_BUS_TYPE_SDMMC_CLK,   // IO is used as SDMMC CLK pin
-  ESP32_BUS_TYPE_SDMMC_CMD,   // IO is used as SDMMC CMD pin
-  ESP32_BUS_TYPE_SDMMC_D0,    // IO is used as SDMMC D0 pin
-  ESP32_BUS_TYPE_SDMMC_D1,    // IO is used as SDMMC D1 pin
-  ESP32_BUS_TYPE_SDMMC_D2,    // IO is used as SDMMC D2 pin
-  ESP32_BUS_TYPE_SDMMC_D3,    // IO is used as SDMMC D3 pin
+  ESP32_BUS_TYPE_SDMMC_CLK,  // IO is used as SDMMC CLK pin
+  ESP32_BUS_TYPE_SDMMC_CMD,  // IO is used as SDMMC CMD pin
+  ESP32_BUS_TYPE_SDMMC_D0,   // IO is used as SDMMC D0 pin
+  ESP32_BUS_TYPE_SDMMC_D1,   // IO is used as SDMMC D1 pin
+  ESP32_BUS_TYPE_SDMMC_D2,   // IO is used as SDMMC D2 pin
+  ESP32_BUS_TYPE_SDMMC_D3,   // IO is used as SDMMC D3 pin
 #if SOC_SDMMC_IO_POWER_EXTERNAL
-  ESP32_BUS_TYPE_SDMMC_POWER, // IO is used as SDMMC POWER pin
+  ESP32_BUS_TYPE_SDMMC_POWER,  // IO is used as SDMMC POWER pin
 #endif
 #endif
 #if SOC_TOUCH_SENSOR_SUPPORTED

libraries/SD_MMC/examples/SDMMC_Test/SDMMC_Test.ino

@@ -55,8 +55,8 @@ int cmd = 35;
 int d0 = 37;
 int d1 = 38;
 int d2 = 33;
-int d3 = 39;  // GPIO 34 is not broken-out on ESP32-S3-DevKitC-1 v1.1
-int power = -1; // SDMMC IO power controlled internally
+int d3 = 39;     // GPIO 34 is not broken-out on ESP32-S3-DevKitC-1 v1.1
+int power = -1;  // SDMMC IO power controlled internally
 
 #elif CONFIG_IDF_TARGET_ESP32P4
 // Pin definition for ESP32-P4 Function EV board V1.4
@@ -235,7 +235,7 @@ void setup() {
     //    return;
     //}
   */
-  
+
   if (!SD_MMC.begin()) {
     Serial.println("Card Mount Failed");
     return;
@@ -279,4 +279,4 @@ void setup() {
 
 void loop() {
   delay(10);
-  }
+}

libraries/SD_MMC/src/SD_MMC.cpp

@@ -204,16 +204,16 @@ bool SDMMCFS::begin(const char *mountpoint, bool mode1bit, bool format_if_mount_
   _mode1bit = mode1bit;
 
 #ifdef SOC_SDMMC_IO_POWER_EXTERNAL
-    sd_pwr_ctrl_ldo_config_t ldo_config = {
-        .ldo_chan_id = _pin_power,
-    };
-    sd_pwr_ctrl_handle_t pwr_ctrl_handle = NULL;
-
-    if(sd_pwr_ctrl_new_on_chip_ldo(&ldo_config, &pwr_ctrl_handle) != ESP_OK) {
-        log_e("Failed to create a new on-chip LDO power control driver");
-        return false;
-    }
-    host.pwr_ctrl_handle = pwr_ctrl_handle;
+  sd_pwr_ctrl_ldo_config_t ldo_config = {
+    .ldo_chan_id = _pin_power,
+  };
+  sd_pwr_ctrl_handle_t pwr_ctrl_handle = NULL;
+
+  if (sd_pwr_ctrl_new_on_chip_ldo(&ldo_config, &pwr_ctrl_handle) != ESP_OK) {
+    log_e("Failed to create a new on-chip LDO power control driver");
+    return false;
+  }
+  host.pwr_ctrl_handle = pwr_ctrl_handle;
 #endif
 
   esp_vfs_fat_sdmmc_mount_config_t mount_config = {
@@ -263,7 +263,7 @@ bool SDMMCFS::begin(const char *mountpoint, bool mode1bit, bool format_if_mount_
   }
 #ifdef SOC_SDMMC_IO_POWER_EXTERNAL
   if (!perimanSetPinBus(_pin_power, ESP32_BUS_TYPE_SDMMC_POWER, (void *)(this), -1, -1)) {
-      goto err;
+    goto err;
   }
 #endif
   return true;