fix(zigbee): Add manuf_code to report attribure commands (#11066)

Author: P-R-O-C-H-Y

libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/Zigbee_Temp_Hum_Sensor_Sleepy.ino

@@ -125,8 +125,8 @@ void loop() {
     int startTime = millis();
     while (digitalRead(button) == LOW) {
       delay(50);
-      if ((millis() - startTime) > 3000) {
-        // If key pressed for more than 3secs, factory reset Zigbee and reboot
+      if ((millis() - startTime) > 10000) {
+        // If key pressed for more than 10secs, factory reset Zigbee and reboot
         Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
         delay(1000);
         Zigbee.factoryReset();

libraries/Zigbee/src/ep/ZigbeeAnalog.cpp

@@ -93,6 +93,7 @@ void ZigbeeAnalog::reportAnalogInput() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_ANALOG_INPUT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);

libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.cpp

@@ -85,6 +85,7 @@ void ZigbeeCarbonDioxideSensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_CARBON_DIOXIDE_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);

libraries/Zigbee/src/ep/ZigbeeFlowSensor.cpp

@@ -79,6 +79,7 @@ void ZigbeeFlowSensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_FLOW_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);

libraries/Zigbee/src/ep/ZigbeeOccupancySensor.cpp

@@ -49,6 +49,7 @@ void ZigbeeOccupancySensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_OCCUPANCY_SENSING;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);

libraries/Zigbee/src/ep/ZigbeePressureSensor.cpp

@@ -75,6 +75,7 @@ void ZigbeePressureSensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_PRESSURE_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);

libraries/Zigbee/src/ep/ZigbeeTempSensor.cpp

@@ -74,6 +74,7 @@ void ZigbeeTempSensor::reportTemperature() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_TEMP_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
@@ -116,6 +117,7 @@ void ZigbeeTempSensor::reportHumidity() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_REL_HUMIDITY_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);