Add thermopro BLE support

content/components/_index.md

@@ -292,6 +292,7 @@ Sensors are organized into categories; if a given sensor fits into more than one
 "Mopeka Pro Check LP","components/sensor/mopeka_pro_check","mopeka_pro_check.jpg","Tank level"
 "Mopeka Standard Check LP","components/sensor/mopeka_std_check","mopeka_std_check.jpg","Tank level"
 "RuuviTag","components/sensor/ruuvitag","ruuvitag.jpg","Temperature & Humidity & Accelerometer"
+"ThermoPro BLE","components/sensor/thermopro_ble","thermopro_tp357.jpg","Temperature & Humidity"
 "Xiaomi BLE","components/sensor/xiaomi_ble","xiaomi_mijia_logo.jpg","Various"
 {{< /imgtable >}}
 

content/components/sensor/thermopro_ble.md

@@ -0,0 +1,116 @@
+---
+description: "Instructions for setting up ThermoPro Bluetooth-based temperature and humidity sensors in ESPHome."
+title: "ThermoPro BLE Sensors"
+params:
+  seo:
+    description: Instructions for setting up ThermoPro Bluetooth-based temperature and humidity sensors in ESPHome.
+    image: thermopro_tp357.jpg
+---
+
+The `thermopro_ble` sensor platform lets you track the output of ThermoPro Bluetooth
+Low Energy devices using the {{< docref "/components/esp32_ble_tracker" >}}. This component will track the
+temperature, humidity, battery level and signal strength of the ThermoPro device every time the
+sensor sends out a BLE broadcast.
+
+## Supported Devices
+
+This component supports multiple ThermoPro BLE sensor models:
+
+- **TP3xx series** (e.g., TP357S): Temperature, humidity, and battery level sensors. Testing has been primarily done with TP357S devices.
+- **TP96x series**: Internal and external temperature sensors with battery level monitoring.
+- **TP970**: Internal and external temperature sensors with battery level monitoring.
+- **TP972**: Internal and external temperature sensors with battery level monitoring.
+
+All models support signal strength (RSSI) monitoring.
+
+{{< img src="thermopro_tp357-full.jpg" alt="Image" caption="ThermoPro TP357 Temperature and Humidity Sensor over BLE." width="80.0%" class="align-center" >}}
+
+```yaml
+# Example configuration entry
+esp32_ble_tracker:
+
+sensor:
+  # TP3xx series example (TP357S with humidity)
+  - platform: thermopro_ble
+    mac_address: XX:XX:XX:XX:XX:XX
+    temperature:
+      name: "ThermoPro Temperature"
+    humidity:
+      name: "ThermoPro Humidity"
+    battery_level:
+      name: "ThermoPro Battery Level"
+    signal_strength:
+      name: "ThermoPro Signal Strength"
+
+  # TP96x/TP970/TP972 example (with external temperature probe)
+  # - platform: thermopro_ble
+  #   mac_address: YY:YY:YY:YY:YY:YY
+  #   temperature:
+  #     name: "ThermoPro Internal Temperature"
+  #   external_temperature:
+  #     name: "ThermoPro External Temperature"
+  #   battery_level:
+  #     name: "ThermoPro Battery Level"
+  #   signal_strength:
+  #     name: "ThermoPro Signal Strength"
+```
+
+## Configuration variables
+
+- **mac_address** (**Required**, MAC Address): The MAC address of the ThermoPro device.
+
+- **temperature** (*Optional*): The information for the temperature sensor.
+
+  - All options from [Sensor](#config-sensor).
+
+- **external_temperature** (*Optional*): The information for the external/probe temperature sensor.
+  Some models (TP972, TP970, TP96x) support dual temperature readings - one internal and one from an external probe.
+
+  - All options from [Sensor](#config-sensor).
+
+- **humidity** (*Optional*): The information for the humidity sensor. Only available on TP3xx devices.
+
+  - All options from [Sensor](#config-sensor).
+
+- **battery_level** (*Optional*): The information for the battery level sensor.
+
+  - All options from [Sensor](#config-sensor).
+
+- **signal_strength** (*Optional*): The information for the signal strength (RSSI) sensor.
+
+  - All options from [Sensor](#config-sensor).
+
+## Setting Up Devices
+
+To set up ThermoPro devices you first need to find their MAC Address so that ESPHome can
+identify them. So first, create a simple configuration without any `thermopro_ble` entries
+like so:
+
+```yaml
+esp32_ble_tracker:
+  on_ble_advertise:
+    - then:
+        - lambda: 'ESP_LOGD("ble_adv", "BLE device address: %s name: %s", x.address_str().c_str(), x.get_name().c_str());'
+```
+
+After uploading the ESP32 will immediately try to scan for BLE devices such as the ThermoPro, so
+you will see messages like this (please note the TPxxxx model name):
+
+```log
+[13:36:43][D][ble_adv:042]: BLE device address: XX:XX:XX:XX:XX:XX name: TP357S (XXXX)
+```
+
+Note that it can sometimes take some time for the first BLE broadcast to be received.
+
+Then just copy the address (`XX:XX:XX:XX:XX:XX`) into a new `sensor.thermopro_ble` platform
+entry like in the configuration example at the top.
+
+> [!NOTE]
+> The ThermoPro BLE component listens passively to packets the device sends by itself.
+> ESPHome therefore has no impact on the battery life of the device.
+
+## See Also
+
+- {{< docref "/components/esp32_ble_tracker" >}}
+- {{< docref "/components/sensor" >}}
+- {{< apiref "thermopro_ble/thermopro_ble.h" "thermopro_ble/thermopro_ble.h" >}}