Merge: Wireless core and drivers rebase to v6.15

MR: https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-10/-/merge_requests/966

JIRA: https://issues.redhat.com/browse/RHEL-89169

ARK MR: cki-project/kernel-ark!3897

Tested: basic testing with several supported WiFi cards (Intel, Qualcomm, Mediatek and Realtek).

Wireless core and drivers update to v6.15.
MHI will be updated in a separate way.

Upstream status: linux.git

Commented fix was already included:
Omitted-fix: 175e69e wifi: iwlwifi: restore missing initialization of async_handlers_list

Not important fixes (postponed):
Omitted-fix: 9a353a4 wifi: ath12k: avoid burning CPU while waiting for firmware stats
Omitted-fix: ac7b8ff wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
Omitted-fix: ad5e917 wifi: ath12k: don't wait when there is no vdev started

Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>

Approved-by: Radu Rendec <rrendec@redhat.com>
Approved-by: Davide Caratti <dcaratti@redhat.com>
Approved-by: Michal Schmidt <mschmidt@redhat.com>

Merged-by: Julio Faracco <jfaracco@redhat.com>

Author: jcfaracco

Documentation/devicetree/bindings/net/rfkill-gpio.yaml

@@ -32,6 +32,10 @@ properties:
   shutdown-gpios:
     maxItems: 1
 
+  default-blocked:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: configure rfkill state as blocked at boot
+
 required:
   - compatible
   - radio-type
@@ -48,4 +52,5 @@ examples:
         label = "rfkill-pcie-wlan";
         radio-type = "wlan";
         shutdown-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+        default-blocked;
     };

Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml

@@ -93,20 +93,41 @@ properties:
 
   ieee80211-freq-limit: true
 
+  qcom,calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Calibration data + board-specific data as a byte array. The length
+      can vary between hardware versions.
+
   qcom,ath10k-calibration-data:
     $ref: /schemas/types.yaml#/definitions/uint8-array
+    deprecated: true
     description:
       Calibration data + board-specific data as a byte array. The length
       can vary between hardware versions.
 
+  qcom,calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Unique variant identifier of the calibration data in board-2.bin
+      for designs with colliding bus and device specific ids
+
   qcom,ath10k-calibration-variant:
     $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
     description:
       Unique variant identifier of the calibration data in board-2.bin
       for designs with colliding bus and device specific ids
 
+  qcom,pre-calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Pre-calibration data as a byte array. The length can vary between
+      hardware versions.
+
   qcom,ath10k-pre-calibration-data:
     $ref: /schemas/types.yaml#/definitions/uint8-array
+    deprecated: true
     description:
       Pre-calibration data as a byte array. The length can vary between
       hardware versions.

Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml

@@ -23,8 +23,15 @@ properties:
   reg:
     maxItems: 1
 
+  qcom,calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      string to uniquely identify variant of the calibration data for designs
+      with colliding bus and device ids
+
   qcom,ath11k-calibration-variant:
     $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
     description: |
       string to uniquely identify variant of the calibration data for designs
       with colliding bus and device ids
@@ -50,6 +57,9 @@ properties:
   vddrfa1p7-supply:
     description: VDD_RFA_1P7 supply regulator handle
 
+  vddrfa1p8-supply:
+    description: VDD_RFA_1P8 supply regulator handle
+
   vddpcie0p9-supply:
     description: VDD_PCIE_0P9 supply regulator handle
 
@@ -77,6 +87,22 @@ allOf:
         - vddrfa1p7-supply
         - vddpcie0p9-supply
         - vddpcie1p8-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: pci17cb,1103
+    then:
+      required:
+        - vddrfacmn-supply
+        - vddaon-supply
+        - vddwlcx-supply
+        - vddwlmx-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p8-supply
+        - vddpcie0p9-supply
+        - vddpcie1p8-supply
 
 additionalProperties: false
 
@@ -99,7 +125,17 @@ examples:
                 compatible = "pci17cb,1103";
                 reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-                qcom,ath11k-calibration-variant = "LE_X13S";
+                vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+                vddaon-supply = <&vreg_pmu_aon_0p8>;
+                vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+                vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+                vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+                vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+                vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+                vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+                vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+                qcom,calibration-variant = "LE_X13S";
             };
         };
     };

Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml

@@ -42,8 +42,15 @@ properties:
         * reg
         * reg-names
 
+  qcom,calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      string to uniquely identify variant of the calibration data in the
+      board-2.bin for designs with colliding bus and device specific ids
+
   qcom,ath11k-calibration-variant:
     $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
     description:
       string to uniquely identify variant of the calibration data in the
       board-2.bin for designs with colliding bus and device specific ids

Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml

@@ -53,8 +53,15 @@ properties:
   reg:
     maxItems: 1
 
+  qcom,calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      String to uniquely identify variant of the calibration data for designs
+      with colliding bus and device ids
+
   qcom,ath12k-calibration-variant:
     $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
     description:
       String to uniquely identify variant of the calibration data for designs
       with colliding bus and device ids
@@ -104,7 +111,7 @@ examples:
                 compatible = "pci17cb,1109";
                 reg = <0x0 0x0 0x0 0x0 0x0>;
 
-                qcom,ath12k-calibration-variant = "RDP433_1";
+                qcom,calibration-variant = "RDP433_1";
 
                 ports {
                     #address-cells = <1>;
@@ -140,7 +147,7 @@ examples:
                 compatible = "pci17cb,1109";
                 reg = <0x0 0x0 0x0 0x0 0x0>;
 
-                qcom,ath12k-calibration-variant = "RDP433_2";
+                qcom,calibration-variant = "RDP433_2";
                 qcom,wsi-controller;
 
                 ports {
@@ -177,7 +184,7 @@ examples:
                 compatible = "pci17cb,1109";
                 reg = <0x0 0x0 0x0 0x0 0x0>;
 
-                qcom,ath12k-calibration-variant = "RDP433_3";
+                qcom,calibration-variant = "RDP433_3";
 
                 ports {
                     #address-cells = <1>;

drivers/net/wireless/ath/ath10k/core.c

@@ -1163,8 +1163,11 @@ int ath10k_core_check_dt(struct ath10k *ar)
 	if (!node)
 		return -ENOENT;
 
-	of_property_read_string(node, "qcom,ath10k-calibration-variant",
+	of_property_read_string(node, "qcom,calibration-variant",
 				&variant);
+	if (!variant)
+		of_property_read_string(node, "qcom,ath10k-calibration-variant",
+					&variant);
 	if (!variant)
 		return -ENODATA;
 
@@ -2259,7 +2262,9 @@ static int ath10k_core_pre_cal_download(struct ath10k *ar)
 		   "boot did not find a pre calibration file, try DT next: %d\n",
 		   ret);
 
-	ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data");
+	ret = ath10k_download_cal_dt(ar, "qcom,pre-calibration-data");
+	if (ret == -ENOENT)
+		ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data");
 	if (ret) {
 		ath10k_dbg(ar, ATH10K_DBG_BOOT,
 			   "unable to load pre cal data from DT: %d\n", ret);
@@ -2337,7 +2342,9 @@ static int ath10k_download_cal_data(struct ath10k *ar)
 		   "boot did not find a calibration file, try DT next: %d\n",
 		   ret);
 
-	ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data");
+	ret = ath10k_download_cal_dt(ar, "qcom,calibration-data");
+	if (ret == -ENOENT)
+		ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data");
 	if (ret == 0) {
 		ar->cal_mode = ATH10K_CAL_MODE_DT;
 		goto done;

drivers/net/wireless/ath/ath11k/Makefile

@@ -27,6 +27,7 @@ ath11k-$(CONFIG_ATH11K_TRACING) += trace.o
 ath11k-$(CONFIG_THERMAL) += thermal.o
 ath11k-$(CONFIG_ATH11K_SPECTRAL) += spectral.o
 ath11k-$(CONFIG_PM) += wow.o
+ath11k-$(CONFIG_DEV_COREDUMP) += coredump.o
 
 obj-$(CONFIG_ATH11K_AHB) += ath11k_ahb.o
 ath11k_ahb-y += ahb.o

drivers/net/wireless/ath/ath11k/ahb.c

@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/module.h>
@@ -1290,6 +1290,7 @@ static void ath11k_ahb_remove(struct platform_device *pdev)
 	ath11k_core_deinit(ab);
 
 qmi_fail:
+	ath11k_fw_destroy(ab);
 	ath11k_ahb_free_resources(ab);
 }
 
@@ -1309,6 +1310,7 @@ static void ath11k_ahb_shutdown(struct platform_device *pdev)
 	ath11k_core_deinit(ab);
 
 free_resources:
+	ath11k_fw_destroy(ab);
 	ath11k_ahb_free_resources(ab);
 }
 

drivers/net/wireless/ath/ath11k/core.c

@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/module.h>
@@ -1175,8 +1175,11 @@ int ath11k_core_check_dt(struct ath11k_base *ab)
 	if (!node)
 		return -ENOENT;
 
-	of_property_read_string(node, "qcom,ath11k-calibration-variant",
+	of_property_read_string(node, "qcom,calibration-variant",
 				&variant);
+	if (!variant)
+		of_property_read_string(node, "qcom,ath11k-calibration-variant",
+					&variant);
 	if (!variant)
 		return -ENODATA;
 
@@ -2056,6 +2059,7 @@ void ath11k_core_halt(struct ath11k *ar)
 	ath11k_mac_scan_finish(ar);
 	ath11k_mac_peer_cleanup_all(ar);
 	cancel_delayed_work_sync(&ar->scan.timeout);
+	cancel_work_sync(&ar->channel_update_work);
 	cancel_work_sync(&ar->regd_update_work);
 	cancel_work_sync(&ab->update_11d_work);
 
@@ -2257,6 +2261,7 @@ static void ath11k_core_reset(struct work_struct *work)
 	reinit_completion(&ab->recovery_start);
 	atomic_set(&ab->recovery_start_count, 0);
 
+	ath11k_coredump_collect(ab);
 	ath11k_core_pre_reconfigure_recovery(ab);
 
 	reinit_completion(&ab->reconfigure_complete);
@@ -2346,7 +2351,6 @@ void ath11k_core_deinit(struct ath11k_base *ab)
 	ath11k_hif_power_down(ab);
 	ath11k_mac_destroy(ab);
 	ath11k_core_soc_destroy(ab);
-	ath11k_fw_destroy(ab);
 }
 EXPORT_SYMBOL(ath11k_core_deinit);
 
@@ -2393,6 +2397,7 @@ struct ath11k_base *ath11k_core_alloc(struct device *dev, size_t priv_size,
 	INIT_WORK(&ab->restart_work, ath11k_core_restart);
 	INIT_WORK(&ab->update_11d_work, ath11k_update_11d);
 	INIT_WORK(&ab->reset_work, ath11k_core_reset);
+	INIT_WORK(&ab->dump_work, ath11k_coredump_upload);
 	timer_setup(&ab->rx_replenish_retry, ath11k_ce_rx_replenish_retry, 0);
 	init_completion(&ab->htc_suspend);
 	init_completion(&ab->wow.wakeup_completed);

drivers/net/wireless/ath/ath11k/core.h

@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH11K_CORE_H
@@ -32,6 +32,7 @@
 #include "spectral.h"
 #include "wow.h"
 #include "fw.h"
+#include "coredump.h"
 
 #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
 
@@ -370,6 +371,7 @@ struct ath11k_vif {
 	struct ieee80211_vif *vif;
 
 	struct wmi_wmm_params_all_arg wmm_params;
+	struct wmi_wmm_params_all_arg muedca_params;
 	struct list_head list;
 	union {
 		struct {
@@ -685,7 +687,7 @@ struct ath11k {
 	struct mutex conf_mutex;
 	/* protects the radio specific data like debug stats, ppdu_stats_info stats,
 	 * vdev_stop_status info, scan data, ath11k_sta info, ath11k_vif info,
-	 * channel context data, survey info, test mode data.
+	 * channel context data, survey info, test mode data, channel_update_queue.
 	 */
 	spinlock_t data_lock;
 
@@ -743,6 +745,9 @@ struct ath11k {
 	struct completion bss_survey_done;
 
 	struct work_struct regd_update_work;
+	struct work_struct channel_update_work;
+	/* protected with data_lock */
+	struct list_head channel_update_queue;
 
 	struct work_struct wmi_mgmt_tx_work;
 	struct sk_buff_head wmi_mgmt_tx_queue;
@@ -900,6 +905,10 @@ struct ath11k_base {
 	/* HW channel counters frequency value in hertz common to all MACs */
 	u32 cc_freq_hz;
 
+	struct ath11k_dump_file_data *dump_data;
+	size_t ath11k_coredump_len;
+	struct work_struct dump_work;
+
 	struct ath11k_htc htc;
 
 	struct ath11k_dp dp;