usb: xhci: rename 'irq_control' to 'imod'

JIRA: https://issues.redhat.com/browse/RHEL-116016

commit f27c6da
Author: Niklas Neronin <niklas.neronin@linux.intel.com>
Date: Thu, 15 May 2025 16:56:19 +0300

  The Interrupt Register Set contains Interrupt Moderation register (IMOD).
  The IMOD register contains the following fields:
   - Bits 15:0:	Interrupt Moderation Interval (IMODI)
   - Bits 31:16:	Interrupt Moderation Counter (IMODC)

  In the xHCI driver, the pointer currently named 'irq_control' refers to the
  IMOD register. However, the name 'irq_control' does not accurately describe
  the register or its contents, and the xHCI specification does not use the
  term "irq control" or "interrupt control" for this register. To improve
  clarity and better align with the xHCI specification, the pointer is
  renamed to 'imod'.

  Additionally, the IMOD register fields IMODI & IMODC have their own masks,
  which are also renamed for consistency:
   * 'ER_IRQ_INTERVAL_MASK' -> 'IMODI_MASK'
   * 'ER_IRQ_COUNTER_MASK' -> 'IMODC_MASK'

  Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
  Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
  Link: https://lore.kernel.org/r/20250515135621.335595-23-mathias.nyman@linux.intel.com
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Desnes Nunes <desnesn@redhat.com>

Author: Desnes Nunes

drivers/usb/host/xhci.c

@@ -367,12 +367,12 @@ int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
 		return -EINVAL;
 
 	/* IMODI value in IMOD register is in 250ns increments */
-	imod_interval = umin(imod_interval / 250, ER_IRQ_INTERVAL_MASK);
+	imod_interval = umin(imod_interval / 250, IMODI_MASK);
 
-	imod = readl(&ir->ir_set->irq_control);
-	imod &= ~ER_IRQ_INTERVAL_MASK;
+	imod = readl(&ir->ir_set->imod);
+	imod &= ~IMODI_MASK;
 	imod |= imod_interval;
-	writel(imod, &ir->ir_set->irq_control);
+	writel(imod, &ir->ir_set->imod);
 
 	return 0;
 }
@@ -835,7 +835,7 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
 		ir->s3_erst_base = xhci_read_64(xhci, &ir->ir_set->erst_base);
 		ir->s3_erst_dequeue = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
 		ir->s3_iman = readl(&ir->ir_set->iman);
-		ir->s3_irq_control = readl(&ir->ir_set->irq_control);
+		ir->s3_imod = readl(&ir->ir_set->imod);
 	}
 }
 
@@ -859,7 +859,7 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
 		xhci_write_64(xhci, ir->s3_erst_base, &ir->ir_set->erst_base);
 		xhci_write_64(xhci, ir->s3_erst_dequeue, &ir->ir_set->erst_dequeue);
 		writel(ir->s3_iman, &ir->ir_set->iman);
-		writel(ir->s3_irq_control, &ir->ir_set->irq_control);
+		writel(ir->s3_imod, &ir->ir_set->imod);
 	}
 }
 

drivers/usb/host/xhci.h

@@ -213,7 +213,7 @@ struct xhci_op_regs {
  * struct xhci_intr_reg - Interrupt Register Set, v1.2 section 5.5.2.
  * @iman:		IMAN - Interrupt Management Register. Used to enable
  *			interrupts and check for pending interrupts.
- * @irq_control:	IMOD - Interrupt Moderation Register. Used to throttle interrupts.
+ * @imod:		IMOD - Interrupt Moderation Register. Used to throttle interrupts.
  * @erst_size:		ERSTSZ - Number of segments in the Event Ring Segment Table (ERST).
  * @erst_base:		ERSTBA - Event ring segment table base address.
  * @erst_dequeue:	ERDP - Event ring dequeue pointer.
@@ -227,7 +227,7 @@ struct xhci_op_regs {
  */
 struct xhci_intr_reg {
 	__le32	iman;
-	__le32	irq_control;
+	__le32	imod;
 	__le32	erst_size;
 	__le32	rsvd;
 	__le64	erst_base;
@@ -240,15 +240,15 @@ struct xhci_intr_reg {
 /* bit 1 - Interrupt Enable (IE), whether the interrupter is capable of generating an interrupt */
 #define	IMAN_IE			(1 << 1)
 
-/* irq_control bitmasks */
+/* imod bitmasks */
 /*
  * bits 15:0 - Interrupt Moderation Interval, the minimum interval between interrupts
  * (in 250ns intervals). The interval between interrupts will be longer if there are no
  * events on the event ring. Default is 4000 (1 ms).
  */
-#define ER_IRQ_INTERVAL_MASK	(0xffff)
+#define IMODI_MASK		(0xffff)
 /* bits 31:16 - Interrupt Moderation Counter, used to count down the time to the next interrupt */
-#define ER_IRQ_COUNTER_MASK	(0xffff << 16)
+#define IMODC_MASK		(0xffff << 16)
 
 /* erst_size bitmasks */
 /* bits 15:0 - Event Ring Segment Table Size, number of ERST entries */
@@ -1453,7 +1453,7 @@ struct xhci_interrupter {
 	u32			isoc_bei_interval;
 	/* For interrupter registers save and restore over suspend/resume */
 	u32	s3_iman;
-	u32	s3_irq_control;
+	u32	s3_imod;
 	u32	s3_erst_size;
 	u64	s3_erst_base;
 	u64	s3_erst_dequeue;