Merge: Update kernel's PCI subsystem to v6.10

MR: https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/5025

```
This series updates RHEL9's PCI subsystem with content from upstream v6.10 -

Merge tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/.../pci/pci
https://lkml.org/lkml/2024/7/5/1008
commit d270dd2
Merge: b673f2b 419d57d
2 files changed, 4 insertions, 3 deletions

Merge tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/.../pci/pci
https://lkml.org/lkml/2024/6/6/1342
commit d91e656
Merge: d30d0e4 c9d52fb
5 files changed, 15 deletions

Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/../pci/pci
https://lkml.org/lkml/2024/5/20/872
commit f0bae24
Merge: fa8151c 7ecf13f
130 files changed, 1232 insertions, 761 deletions


The vast majority of patches within the series back-ported cleanly.
However, there were a few back-ports where some changes were made to the
originating upstream patch due to it either not being quite up to date with
more recent changes, or subsequent changes were made during its merge
commit.  All such occurances are noted in the back-port's commit message
with the same changes that occurred upstream being made in the back-port to
keep things in sync.


JIRA: https://issues.redhat.com/browse/RHEL-50255
Omitted-Fix: 26641b3  "PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig
dependencies".
        This is related to the back-port of upstream commit 407d1a5
        (patch 7/100).  As mentioned in that commit, this series is not
        intending to enable new functionality, thus the updates to both
        the Makefile and Kconfig files were skipped.  However, taking the
        updates for the remaining patch's files does help with this, and
        future, back-port efforts, enabling them to be cleaner overall. 
        As such, this ommitted-fix target is also being skipped.

Signed-off-by: Myron Stowe <mstowe@redhat.com>
```

Approved-by: John W. Linville <linville@redhat.com>
Approved-by: Eric Chanudet <echanude@redhat.com>
Approved-by: Jerry Snitselaar <jsnitsel@redhat.com>
Approved-by: Michal Schmidt <mschmidt@redhat.com>
Approved-by: Andrew Halaney <ahalaney@redhat.com>
Approved-by: Ivan Vecera <ivecera@redhat.com>
Approved-by: Mika Penttilä <mpenttil@redhat.com>
Approved-by: David Arcari <darcari@redhat.com>
Approved-by: CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com>

Merged-by: Rado Vrbovsky <rvrbovsk@redhat.com>

Author: emmil

Documentation/PCI/msi-howto.rst

@@ -103,7 +103,7 @@ min_vecs argument set to this limit, and the PCI core will return -ENOSPC
 if it can't meet the minimum number of vectors.
 
 The flags argument is used to specify which type of interrupt can be used
-by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
+by the device and the driver (PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX).
 A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
 any possible kind of interrupt.  If the PCI_IRQ_AFFINITY flag is set,
 pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.

Documentation/PCI/pci.rst

@@ -335,7 +335,7 @@ causes the PCI support to program CPU vector data into the PCI device
 capability registers. Many architectures, chip-sets, or BIOSes do NOT
 support MSI or MSI-X and a call to pci_alloc_irq_vectors with just
 the PCI_IRQ_MSI and PCI_IRQ_MSIX flags will fail, so try to always
-specify PCI_IRQ_LEGACY as well.
+specify PCI_IRQ_INTX as well.
 
 Drivers that have different interrupt handlers for MSI/MSI-X and
 legacy INTx should chose the right one based on the msi_enabled

Documentation/PCI/pcieaer-howto.rst

@@ -241,7 +241,7 @@ After reboot with new kernel or insert the module, a device file named
 Then, you need a user space tool named aer-inject, which can be gotten
 from:
 
-    https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
+    https://github.com/intel/aer-inject.git
 
 More information about aer-inject can be found in the document in
 its source code.

Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml

@@ -10,8 +10,7 @@ maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: "cdns-pcie-ep.yaml#"
-  - $ref: "pci-ep.yaml#"
+  - $ref: cdns-pcie-ep.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml

@@ -10,8 +10,7 @@ maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-  - $ref: "cdns-pcie-host.yaml#"
+  - $ref: cdns-pcie-host.yaml#
 
 properties:
   compatible:
@@ -25,8 +24,6 @@ properties:
       - const: reg
       - const: cfg
 
-  msi-parent: true
-
 required:
   - reg
   - reg-names

Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml

@@ -1,16 +1,17 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence PCIe Device
 
 maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: "cdns-pcie.yaml#"
+  - $ref: cdns-pcie.yaml#
+  - $ref: pci-ep.yaml#
 
 properties:
   cdns,max-outbound-regions:

Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml

@@ -1,17 +1,17 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence PCIe Host
 
 maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: "/schemas/pci/pci-bus.yaml#"
-  - $ref: "cdns-pcie.yaml#"
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: cdns-pcie.yaml#
 
 properties:
   cdns,max-outbound-regions:

Documentation/devicetree/bindings/pci/cdns-pcie.yaml

@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/cdns-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence PCIe Core
 

Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml

@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Endpoint(EP) controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This PCIe EP controller is based on the Synopsys DesignWare PCIe IP.
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls2088a-pcie-ep
+      - fsl,ls1088a-pcie-ep
+      - fsl,ls1046a-pcie-ep
+      - fsl,ls1028a-pcie-ep
+      - fsl,lx2160ar2-pcie-ep
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: addr_space
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the SCFG device node. The second entry is the
+      physical PCIe controller index starting from '0'. This is used to get
+      SCFG PEXN registers.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+  dma-coherent: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1028a-pcie-ep
+            - fsl,ls1046a-pcie-ep
+            - fsl,ls1088a-pcie-ep
+    then:
+      properties:
+        interrupt-names:
+          items:
+            - const: pme
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie_ep1: pcie-ep@3400000 {
+        compatible = "fsl,ls1028a-pcie-ep";
+        reg = <0x00 0x03400000 0x0 0x00100000
+              0x80 0x00000000 0x8 0x00000000>;
+        reg-names = "regs", "addr_space";
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+        interrupt-names = "pme";
+        num-ib-windows = <6>;
+        num-ob-windows = <8>;
+        status = "disabled";
+      };
+    };
+...

Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml

@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Root Complex(RC) controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1021a-pcie
+      - fsl,ls2080a-pcie
+      - fsl,ls2085a-pcie
+      - fsl,ls2088a-pcie
+      - fsl,ls1088a-pcie
+      - fsl,ls1046a-pcie
+      - fsl,ls1043a-pcie
+      - fsl,ls1012a-pcie
+      - fsl,ls1028a-pcie
+      - fsl,lx2160a-pcie
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: config
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the SCFG device node. The second entry is the
+      physical PCIe controller index starting from '0'. This is used to get
+      SCFG PEXN registers.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+  dma-coherent: true
+
+  msi-parent: true
+
+  iommu-map: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - device_type
+  - bus-range
+  - ranges
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1028a-pcie
+            - fsl,ls1046a-pcie
+            - fsl,ls1043a-pcie
+            - fsl,ls1012a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: pme
+            - const: aer
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls2080a-pcie
+            - fsl,ls2085a-pcie
+            - fsl,ls2088a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: intr
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1088a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: aer
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@3400000 {
+        compatible = "fsl,ls1088a-pcie";
+        reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+            <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+        reg-names = "regs", "config";
+        interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+        interrupt-names = "aer";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        dma-coherent;
+        device_type = "pci";
+        bus-range = <0x0 0xff>;
+        ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+        msi-parent = <&its>;
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+        iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+      };
+    };
+...