Merge tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A collection of driver specific fixes, most minor apart from the OMAP
  ones which disable some recent performance optimisations in some
  non-standard cases where we could start driving the bus incorrectly.

  The change to the stm32-ospi driver to use the newer reset APIs is a
  fix for interactions with other IP sharing the same reset line in some
  SoCs"

* tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine
  spi: stm32-ospi: clean up on error in probe()
  spi: stm32-ospi: Make usage of reset_control_acquire/release() API
  spi: offload: check offload ops existence before disabling the trigger
  spi: spi-pci1xxxx: Fix error code in probe
  spi: loongson: Fix build warnings about export.h
  spi: omap2-mcspi: Disable multi-mode when the previous message kept CS asserted
  spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after message

Author: torvalds

drivers/spi/spi-loongson-core.c

@@ -5,6 +5,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>

drivers/spi/spi-offload.c

@@ -297,7 +297,7 @@ int spi_offload_trigger_enable(struct spi_offload *offload,
 	if (trigger->ops->enable) {
 		ret = trigger->ops->enable(trigger, config);
 		if (ret) {
-			if (offload->ops->trigger_disable)
+			if (offload->ops && offload->ops->trigger_disable)
 				offload->ops->trigger_disable(offload);
 			return ret;
 		}

drivers/spi/spi-omap2-mcspi.c

@@ -134,6 +134,7 @@ struct omap2_mcspi {
 	size_t			max_xfer_len;
 	u32			ref_clk_hz;
 	bool			use_multi_mode;
+	bool			last_msg_kept_cs;
 };
 
 struct omap2_mcspi_cs {
@@ -1269,6 +1270,10 @@ static int omap2_mcspi_prepare_message(struct spi_controller *ctlr,
 	 * multi-mode is applicable.
 	 */
 	mcspi->use_multi_mode = true;
+
+	if (mcspi->last_msg_kept_cs)
+		mcspi->use_multi_mode = false;
+
 	list_for_each_entry(tr, &msg->transfers, transfer_list) {
 		if (!tr->bits_per_word)
 			bits_per_word = msg->spi->bits_per_word;
@@ -1287,18 +1292,19 @@ static int omap2_mcspi_prepare_message(struct spi_controller *ctlr,
 			mcspi->use_multi_mode = false;
 		}
 
-		/* Check if transfer asks to change the CS status after the transfer */
-		if (!tr->cs_change)
-			mcspi->use_multi_mode = false;
-
-		/*
-		 * If at least one message is not compatible, switch back to single mode
-		 *
-		 * The bits_per_word of certain transfer can be different, but it will have no
-		 * impact on the signal itself.
-		 */
-		if (!mcspi->use_multi_mode)
-			break;
+		if (list_is_last(&tr->transfer_list, &msg->transfers)) {
+			/* Check if transfer asks to keep the CS status after the whole message */
+			if (tr->cs_change) {
+				mcspi->use_multi_mode = false;
+				mcspi->last_msg_kept_cs = true;
+			} else {
+				mcspi->last_msg_kept_cs = false;
+			}
+		} else {
+			/* Check if transfer asks to change the CS status after the transfer */
+			if (!tr->cs_change)
+				mcspi->use_multi_mode = false;
+		}
 	}
 
 	omap2_mcspi_set_mode(ctlr);

drivers/spi/spi-pci1xxxx.c

@@ -762,10 +762,10 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *
 				return -EINVAL;
 
 			num_vector = pci_alloc_irq_vectors(pdev, 1, hw_inst_cnt,
-							   PCI_IRQ_ALL_TYPES);
+							   PCI_IRQ_INTX | PCI_IRQ_MSI);
 			if (num_vector < 0) {
 				dev_err(&pdev->dev, "Error allocating MSI vectors\n");
-				return ret;
+				return num_vector;
 			}
 
 			init_completion(&spi_sub_ptr->spi_xfer_done);

drivers/spi/spi-stm32-ospi.c

@@ -804,7 +804,7 @@ static int stm32_ospi_get_resources(struct platform_device *pdev)
 		return ret;
 	}
 
-	ospi->rstc = devm_reset_control_array_get_exclusive(dev);
+	ospi->rstc = devm_reset_control_array_get_exclusive_released(dev);
 	if (IS_ERR(ospi->rstc))
 		return dev_err_probe(dev, PTR_ERR(ospi->rstc),
 				     "Can't get reset\n");
@@ -936,12 +936,16 @@ static int stm32_ospi_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_pm_enable;
 
-	if (ospi->rstc) {
-		reset_control_assert(ospi->rstc);
-		udelay(2);
-		reset_control_deassert(ospi->rstc);
+	ret = reset_control_acquire(ospi->rstc);
+	if (ret) {
+		dev_err_probe(dev, ret, "Can not acquire reset %d\n", ret);
+		goto err_pm_resume;
 	}
 
+	reset_control_assert(ospi->rstc);
+	udelay(2);
+	reset_control_deassert(ospi->rstc);
+
 	ret = spi_register_controller(ctrl);
 	if (ret) {
 		/* Disable ospi */
@@ -987,6 +991,8 @@ static void stm32_ospi_remove(struct platform_device *pdev)
 	if (ospi->dma_chrx)
 		dma_release_channel(ospi->dma_chrx);
 
+	reset_control_release(ospi->rstc);
+
 	pm_runtime_put_sync_suspend(ospi->dev);
 	pm_runtime_force_suspend(ospi->dev);
 }
@@ -997,6 +1003,8 @@ static int __maybe_unused stm32_ospi_suspend(struct device *dev)
 
 	pinctrl_pm_select_sleep_state(dev);
 
+	reset_control_release(ospi->rstc);
+
 	return pm_runtime_force_suspend(ospi->dev);
 }
 
@@ -1016,6 +1024,12 @@ static int __maybe_unused stm32_ospi_resume(struct device *dev)
 	if (ret < 0)
 		return ret;
 
+	ret = reset_control_acquire(ospi->rstc);
+	if (ret) {
+		dev_err(dev, "Can not acquire reset\n");
+		return ret;
+	}
+
 	writel_relaxed(ospi->cr_reg, regs_base + OSPI_CR);
 	writel_relaxed(ospi->dcr_reg, regs_base + OSPI_DCR1);
 	pm_runtime_mark_last_busy(ospi->dev);