Merge tag 'kvmarm-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for 6.15

 - Nested virtualization support for VGICv3, giving the nested
   hypervisor control of the VGIC hardware when running an L2 VM

 - Removal of 'late' nested virtualization feature register masking,
   making the supported feature set directly visible to userspace

 - Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
   of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers

 - Paravirtual interface for discovering the set of CPU implementations
   where a VM may run, addressing a longstanding issue of guest CPU
   errata awareness in big-little systems and cross-implementation VM
   migration

 - Userspace control of the registers responsible for identifying a
   particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
   allowing VMs to be migrated cross-implementation

 - pKVM updates, including support for tracking stage-2 page table
   allocations in the protected hypervisor in the 'SecPageTable' stat

 - Fixes to vPMU, ensuring that userspace updates to the vPMU after
   KVM_RUN are reflected into the backing perf events

Author: bonzini

Documentation/virt/kvm/api.rst

@@ -8262,6 +8262,24 @@ KVM exits with the register state of either the L1 or L2 guest
 depending on which executed at the time of an exit. Userspace must
 take care to differentiate between these cases.
 
+7.37 KVM_CAP_ARM_WRITABLE_IMP_ID_REGS
+-------------------------------------
+
+:Architectures: arm64
+:Target: VM
+:Parameters: None
+:Returns: 0 on success, -EINVAL if vCPUs have been created before enabling this
+          capability.
+
+This capability changes the behavior of the registers that identify a PE
+implementation of the Arm architecture: MIDR_EL1, REVIDR_EL1, and AIDR_EL1.
+By default, these registers are visible to userspace but treated as invariant.
+
+When this capability is enabled, KVM allows userspace to change the
+aforementioned registers before the first KVM_RUN. These registers are VM
+scoped, meaning that the same set of values are presented on all vCPUs in a
+given VM.
+
 8. Other capabilities.
 ======================
 

Documentation/virt/kvm/arm/fw-pseudo-registers.rst

@@ -116,7 +116,7 @@ The pseudo-firmware bitmap register are as follows:
       ARM DEN0057A.
 
 * KVM_REG_ARM_VENDOR_HYP_BMAP:
-    Controls the bitmap of the Vendor specific Hypervisor Service Calls.
+    Controls the bitmap of the Vendor specific Hypervisor Service Calls[0-63].
 
   The following bits are accepted:
 
@@ -127,6 +127,19 @@ The pseudo-firmware bitmap register are as follows:
     Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP:
       The bit represents the Precision Time Protocol KVM service.
 
+* KVM_REG_ARM_VENDOR_HYP_BMAP_2:
+    Controls the bitmap of the Vendor specific Hypervisor Service Calls[64-127].
+
+  The following bits are accepted:
+
+    Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_DISCOVER_IMPL_VER
+      This represents the ARM_SMCCC_VENDOR_HYP_KVM_DISCOVER_IMPL_VER_FUNC_ID
+      function-id. This is reset to 0.
+
+    Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_DISCOVER_IMPL_CPUS
+      This represents the ARM_SMCCC_VENDOR_HYP_KVM_DISCOVER_IMPL_CPUS_FUNC_ID
+      function-id. This is reset to 0.
+
 Errors:
 
     =======  =============================================================

Documentation/virt/kvm/arm/hypercalls.rst

@@ -142,3 +142,62 @@ region is equal to the memory protection granule advertised by
 |                     |          |    +---------------------------------------------+
 |                     |          |    | ``INVALID_PARAMETER (-3)``                  |
 +---------------------+----------+----+---------------------------------------------+
+
+``ARM_SMCCC_VENDOR_HYP_KVM_DISCOVER_IMPL_VER_FUNC_ID``
+-------------------------------------------------------
+Request the target CPU implementation version information and the number of target
+implementations for the Guest VM.
+
++---------------------+-------------------------------------------------------------+
+| Presence:           | Optional;  KVM/ARM64 Guests only                            |
++---------------------+-------------------------------------------------------------+
+| Calling convention: | HVC64                                                       |
++---------------------+----------+--------------------------------------------------+
+| Function ID:        | (uint32) | 0xC6000040                                       |
++---------------------+----------+--------------------------------------------------+
+| Arguments:          | None                                                        |
++---------------------+----------+----+---------------------------------------------+
+| Return Values:      | (int64)  | R0 | ``SUCCESS (0)``                             |
+|                     |          |    +---------------------------------------------+
+|                     |          |    | ``NOT_SUPPORTED (-1)``                      |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R1 | Bits [63:32] Reserved/Must be zero          |
+|                     |          |    +---------------------------------------------+
+|                     |          |    | Bits [31:16] Major version                  |
+|                     |          |    +---------------------------------------------+
+|                     |          |    | Bits [15:0] Minor version                   |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R2 | Number of target implementations            |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R3 | Reserved / Must be zero                     |
++---------------------+----------+----+---------------------------------------------+
+
+``ARM_SMCCC_VENDOR_HYP_KVM_DISCOVER_IMPL_CPUS_FUNC_ID``
+-------------------------------------------------------
+
+Request the target CPU implementation information for the Guest VM. The Guest kernel
+will use this information to enable the associated errata.
+
++---------------------+-------------------------------------------------------------+
+| Presence:           | Optional;  KVM/ARM64 Guests only                            |
++---------------------+-------------------------------------------------------------+
+| Calling convention: | HVC64                                                       |
++---------------------+----------+--------------------------------------------------+
+| Function ID:        | (uint32) | 0xC6000041                                       |
++---------------------+----------+----+---------------------------------------------+
+| Arguments:          | (uint64) | R1 | selected implementation index               |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R2 | Reserved / Must be zero                     |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R3 | Reserved / Must be zero                     |
++---------------------+----------+----+---------------------------------------------+
+| Return Values:      | (int64)  | R0 | ``SUCCESS (0)``                             |
+|                     |          |    +---------------------------------------------+
+|                     |          |    | ``INVALID_PARAMETER (-3)``                  |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R1 | MIDR_EL1 of the selected implementation     |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R2 | REVIDR_EL1 of the selected implementation   |
+|                     +----------+----+---------------------------------------------+
+|                     | (uint64) | R3 | AIDR_EL1  of the selected implementation    |
++---------------------+----------+----+---------------------------------------------+

Documentation/virt/kvm/devices/arm-vgic-its.rst

@@ -126,7 +126,8 @@ KVM_DEV_ARM_VGIC_GRP_ITS_REGS
 ITS Restore Sequence:
 ---------------------
 
-The following ordering must be followed when restoring the GIC and the ITS:
+The following ordering must be followed when restoring the GIC, ITS, and
+KVM_IRQFD assignments:
 
 a) restore all guest memory and create vcpus
 b) restore all redistributors
@@ -139,6 +140,8 @@ d) restore the ITS in the following order:
      3. Load the ITS table data (KVM_DEV_ARM_ITS_RESTORE_TABLES)
      4. Restore GITS_CTLR
 
+e) restore KVM_IRQFD assignments for MSIs
+
 Then vcpus can be started.
 
 ITS Table ABI REV0:

Documentation/virt/kvm/devices/arm-vgic-v3.rst

@@ -291,8 +291,18 @@ Groups:
       |    Aff3    |    Aff2    |    Aff1    |    Aff0    |
 
   Errors:
-
     =======  =============================================
     -EINVAL  vINTID is not multiple of 32 or info field is
 	     not VGIC_LEVEL_INFO_LINE_LEVEL
     =======  =============================================
+
+  KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ
+   Attributes:
+
+    The attr field of kvm_device_attr encodes the following values:
+
+      bits:     | 31   ....    5 | 4  ....  0 |
+      values:   |      RES0      |   vINTID   |
+
+    The vINTID specifies which interrupt is generated when the vGIC
+    must generate a maintenance interrupt. This must be a PPI.

arch/arm64/include/asm/apple_m1_pmu.h

@@ -37,6 +37,7 @@
 #define PMCR0_PMI_ENABLE_8_9	GENMASK(45, 44)
 
 #define SYS_IMP_APL_PMCR1_EL1	sys_reg(3, 1, 15, 1, 0)
+#define SYS_IMP_APL_PMCR1_EL12	sys_reg(3, 1, 15, 7, 2)
 #define PMCR1_COUNT_A64_EL0_0_7	GENMASK(15, 8)
 #define PMCR1_COUNT_A64_EL1_0_7	GENMASK(23, 16)
 #define PMCR1_COUNT_A64_EL0_8_9	GENMASK(41, 40)

arch/arm64/include/asm/cpucaps.h

@@ -71,6 +71,8 @@ cpucap_is_possible(const unsigned int cap)
 		 * KVM MPAM support doesn't rely on the host kernel supporting MPAM.
 		*/
 		return true;
+	case ARM64_HAS_PMUV3:
+		return IS_ENABLED(CONFIG_HW_PERF_EVENTS);
 	}
 
 	return true;

arch/arm64/include/asm/cpufeature.h

@@ -525,29 +525,6 @@ cpuid_feature_extract_unsigned_field(u64 features, int field)
 	return cpuid_feature_extract_unsigned_field_width(features, field, 4);
 }
 
-/*
- * Fields that identify the version of the Performance Monitors Extension do
- * not follow the standard ID scheme. See ARM DDI 0487E.a page D13-2825,
- * "Alternative ID scheme used for the Performance Monitors Extension version".
- */
-static inline u64 __attribute_const__
-cpuid_feature_cap_perfmon_field(u64 features, int field, u64 cap)
-{
-	u64 val = cpuid_feature_extract_unsigned_field(features, field);
-	u64 mask = GENMASK_ULL(field + 3, field);
-
-	/* Treat IMPLEMENTATION DEFINED functionality as unimplemented */
-	if (val == ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
-		val = 0;
-
-	if (val > cap) {
-		features &= ~mask;
-		features |= (cap << field) & mask;
-	}
-
-	return features;
-}
-
 static inline u64 arm64_ftr_mask(const struct arm64_ftr_bits *ftrp)
 {
 	return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
@@ -866,6 +843,11 @@ static __always_inline bool system_supports_mpam_hcr(void)
 	return alternative_has_cap_unlikely(ARM64_MPAM_HCR);
 }
 
+static inline bool system_supports_pmuv3(void)
+{
+	return cpus_have_final_cap(ARM64_HAS_PMUV3);
+}
+
 int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 

arch/arm64/include/asm/cputype.h

@@ -231,6 +231,16 @@
 
 #define read_cpuid(reg)			read_sysreg_s(SYS_ ## reg)
 
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant.  Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline u32 __attribute_const__ read_cpuid_id(void)
+{
+	return read_cpuid(MIDR_EL1);
+}
+
 /*
  * Represent a range of MIDR values for a given CPU model and a
  * range of variant/revision values.
@@ -266,30 +276,14 @@ static inline bool midr_is_cpu_model_range(u32 midr, u32 model, u32 rv_min,
 	return _model == model && rv >= rv_min && rv <= rv_max;
 }
 
-static inline bool is_midr_in_range(u32 midr, struct midr_range const *range)
-{
-	return midr_is_cpu_model_range(midr, range->model,
-				       range->rv_min, range->rv_max);
-}
-
-static inline bool
-is_midr_in_range_list(u32 midr, struct midr_range const *ranges)
-{
-	while (ranges->model)
-		if (is_midr_in_range(midr, ranges++))
-			return true;
-	return false;
-}
+struct target_impl_cpu {
+	u64 midr;
+	u64 revidr;
+	u64 aidr;
+};
 
-/*
- * The CPU ID never changes at run time, so we might as well tell the
- * compiler that it's constant.  Use this function to read the CPU ID
- * rather than directly reading processor_id or read_cpuid() directly.
- */
-static inline u32 __attribute_const__ read_cpuid_id(void)
-{
-	return read_cpuid(MIDR_EL1);
-}
+bool cpu_errata_set_target_impl(u64 num, void *impl_cpus);
+bool is_midr_in_range_list(struct midr_range const *ranges);
 
 static inline u64 __attribute_const__ read_cpuid_mpidr(void)
 {

arch/arm64/include/asm/hypervisor.h

@@ -6,6 +6,7 @@
 
 void kvm_init_hyp_services(void);
 bool kvm_arm_hyp_service_available(u32 func_id);
+void kvm_arm_target_impl_cpu_init(void);
 
 #ifdef CONFIG_ARM_PKVM_GUEST
 void pkvm_init_hyp_services(void);