Increase robustness of LwsApiCall implementation

 - Handle partial writes by sending data in multiple iterations
 - Use retries when message send fails
 - Track and handle message receive if in parts using `receiveMessage` var

Author: vikramdattu

src/source/Signaling/LwsApiCalls.c

@@ -246,7 +246,9 @@ INT32 lwsHttpCallbackRoutine(struct lws* wsi, enum lws_callback_reasons reason,
             if (size != (INT32) pRequestInfo->bodySize) {
                 DLOGW("Failed to write out the body of POST request entirely. Expected to write %d, wrote %d", pRequestInfo->bodySize, size);
                 if (size > 0) {
-                    // Schedule again
+                    // Update remainig data and schedule again
+                    pRequestInfo->bodySize -= size;
+                    pRequestInfo->body += size;
                     lws_client_http_body_pending(wsi, 1);
                     lws_callback_on_writable(wsi);
                 } else {
@@ -306,6 +308,8 @@ INT32 lwsWssCallbackRoutine(struct lws* wsi, enum lws_callback_reasons reason, P
         case LWS_CALLBACK_WS_PEER_INITIATED_CLOSE:
         case LWS_CALLBACK_CLIENT_RECEIVE:
         case LWS_CALLBACK_CLIENT_WRITEABLE:
+        case LWS_CALLBACK_TIMER:
+        case LWS_CALLBACK_CLIENT_RECEIVE_PONG:
             break;
         default:
             DLOGI("WSS callback with reason %d", reason);
@@ -378,9 +382,16 @@ INT32 lwsWssCallbackRoutine(struct lws* wsi, enum lws_callback_reasons reason, P
             pSignalingClient->diagnostics.connectTime = SIGNALING_GET_CURRENT_TIME(pSignalingClient);
             MUTEX_UNLOCK(pSignalingClient->diagnosticsLock);
 
+            lws_set_timer_usecs(wsi, SIGNALING_SERVICE_WSS_PING_PONG_INTERVAL_IN_SECONDS * HUNDREDS_OF_NANOS_IN_A_SECOND);
             // Notify the listener thread
             CVAR_BROADCAST(pSignalingClient->connectedCvar);
 
+            // Keep connection alive
+            lws_callback_on_writable(wsi);
+            break;
+        case LWS_CALLBACK_TIMER:
+            lws_callback_on_writable(wsi);
+            lws_set_timer_usecs(wsi, SIGNALING_SERVICE_WSS_PING_PONG_INTERVAL_IN_SECONDS * HUNDREDS_OF_NANOS_IN_A_SECOND);
             break;
 
         case LWS_CALLBACK_CLIENT_CLOSED:
@@ -426,79 +437,106 @@ INT32 lwsWssCallbackRoutine(struct lws* wsi, enum lws_callback_reasons reason, P
 
             DLOGD("Peer initiated close with %d (0x%08x). Message: %.*s", status, (UINT32) status, size, pCurPtr);
 
-            // Store the state as the result
-            retValue = -1;
+            if ((status != 0 && status != LWS_CLOSE_STATUS_NORMAL) && !ATOMIC_LOAD_BOOL(&pLwsCallInfo->receiveMessage)) {
+                ATOMIC_STORE(&pSignalingClient->result, SERVICE_CALL_INTERNAL_ERROR);
+                retValue = -1;
+            } else {
+                // Store normal closure status
+                ATOMIC_STORE(&pSignalingClient->result, SERVICE_CALL_RESULT_OK);
+                retValue = 0;
+            }
 
-            ATOMIC_STORE(&pSignalingClient->result, (SIZE_T) status);
+            break;
 
+        case LWS_CALLBACK_CLIENT_RECEIVE_PONG:
+            DLOGV("Received PONG from server");
             break;
 
         case LWS_CALLBACK_CLIENT_RECEIVE:
 
+            lwsl_info("WS receive callback, len: %zu, is_final: %d\n", dataSize, lws_is_final_fragment(wsi));
+
             // Check if it's a binary data
+            if (lws_frame_is_binary(wsi)) {
+                DLOGW("Received binary data");
+            }
             CHK(!lws_frame_is_binary(wsi), STATUS_SIGNALING_RECEIVE_BINARY_DATA_NOT_SUPPORTED);
 
-            // Skip if it's the first and last fragment and the size is 0
-            CHK(!(lws_is_first_fragment(wsi) && lws_is_final_fragment(wsi) && dataSize == 0), retStatus);
+            // Mark as receiving a message
+            ATOMIC_STORE_BOOL(&pLwsCallInfo->receiveMessage, TRUE);
 
-            // Check what type of a message it is. We will set the size to 0 on first and flush on last
-            if (lws_is_first_fragment(wsi)) {
-                pLwsCallInfo->receiveBufferSize = 0;
-            }
-
-            // Store the data in the buffer
+            // Store the data in the receive buffer
             CHK(pLwsCallInfo->receiveBufferSize + (UINT32) dataSize + LWS_PRE <= SIZEOF(pLwsCallInfo->receiveBuffer),
                 STATUS_SIGNALING_RECEIVED_MESSAGE_LARGER_THAN_MAX_DATA_LEN);
             MEMCPY(&pLwsCallInfo->receiveBuffer[LWS_PRE + pLwsCallInfo->receiveBufferSize], pDataIn, dataSize);
             pLwsCallInfo->receiveBufferSize += (UINT32) dataSize;
 
-            // Flush on last
+            // Process complete message
             if (lws_is_final_fragment(wsi)) {
-                CHK_STATUS(receiveLwsMessage(pLwsCallInfo->pSignalingClient, (PCHAR) &pLwsCallInfo->receiveBuffer[LWS_PRE],
+                CHK_STATUS(receiveLwsMessage(pSignalingClient, (PCHAR) &pLwsCallInfo->receiveBuffer[LWS_PRE],
                                              pLwsCallInfo->receiveBufferSize / SIZEOF(CHAR)));
+                pLwsCallInfo->receiveBufferSize = 0;
+                ATOMIC_STORE_BOOL(&pLwsCallInfo->receiveMessage, FALSE);
             }
 
-            lws_callback_on_writable(wsi);
-
+            // Keep connection alive after receiving data
+            if (!ATOMIC_LOAD_BOOL(&pSignalingClient->shutdown)) {
+                lws_callback_on_writable(wsi);
+            }
             break;
 
         case LWS_CALLBACK_CLIENT_WRITEABLE:
             DLOGD("Client is writable");
 
-            // Check if we are attempting to terminate the connection
-            if (!ATOMIC_LOAD_BOOL(&pSignalingClient->connected) && ATOMIC_LOAD(&pSignalingClient->messageResult) == SERVICE_CALL_UNKNOWN) {
-                retValue = 1;
-                CHK(FALSE, retStatus);
+            // Add buffer state check
+            if (lws_send_pipe_choked(wsi)) {
+                DLOGI("WS send pipe choked, retrying");
+                lws_callback_on_writable(wsi);
+                break;
             }
 
-            offset = (UINT32) ATOMIC_LOAD(&pLwsCallInfo->sendOffset);
-            bufferSize = (UINT32) ATOMIC_LOAD(&pLwsCallInfo->sendBufferSize);
-            writeSize = (INT32) (bufferSize - offset);
-
-            // Check if we need to do anything
-            CHK(writeSize > 0, retStatus);
+            // Log buffer state before write
+            DLOGD("Send buffer size before write: %zu", pLwsCallInfo->sendBufferSize);
 
-            // Send data and notify on completion
-            size = lws_write(wsi, &(pLwsCallInfo->sendBuffer[pLwsCallInfo->sendOffset]), (SIZE_T) writeSize, LWS_WRITE_TEXT);
-
-            if (size < 0) {
-                DLOGW("Write failed. Returned write size is %d", size);
-                // Quit
-                retValue = -1;
-                CHK(FALSE, retStatus);
+            // Only check termination if we're not in the middle of receiving a message
+            if (!ATOMIC_LOAD_BOOL(&pLwsCallInfo->receiveMessage)) {
+                CHK(!ATOMIC_LOAD_BOOL(&pRequestInfo->terminating), retStatus);
             }
 
-            if (size == writeSize) {
-                // Notify the listener
-                ATOMIC_STORE(&pLwsCallInfo->sendOffset, 0);
-                ATOMIC_STORE(&pLwsCallInfo->sendBufferSize, 0);
-                CVAR_BROADCAST(pLwsCallInfo->pSignalingClient->sendCvar);
-            } else {
-                // Partial write
-                DLOGV("Failed to write out the data entirely. Wrote %d out of %d", size, writeSize);
-                // Schedule again
-                lws_callback_on_writable(wsi);
+            // Send data if anything is in the buffer
+            if (pLwsCallInfo->sendBufferSize != 0) {
+                SIZE_T remainingSize = pLwsCallInfo->sendBufferSize - LWS_PRE;
+                // Log write attempt
+                DLOGD("Attempting to write %zu bytes", remainingSize);
+
+                retValue = (INT32) lws_write(wsi, pLwsCallInfo->sendBuffer + LWS_PRE, remainingSize, LWS_WRITE_TEXT);
+                if (retValue < 0) {
+                    DLOGW("Write failed with %d", retValue);
+                    CHK(FALSE, !STATUS_SUCCESS);
+                } else if ((SIZE_T) retValue < remainingSize) {
+                    DLOGW("Partial write occurred: %d of %zu bytes", retValue, remainingSize);
+                    // Move remaining data to start of buffer
+                    MEMMOVE(pLwsCallInfo->sendBuffer + LWS_PRE, pLwsCallInfo->sendBuffer + LWS_PRE + retValue, remainingSize - retValue);
+                    // Update buffer size
+                    pLwsCallInfo->sendBufferSize = (remainingSize - retValue) + LWS_PRE;
+
+                    // Handle partial write
+                    lws_callback_on_writable(wsi);
+                } else {
+                    // Complete write
+                    DLOGI("Write complete: %d bytes", retValue);
+                    pLwsCallInfo->sendBufferSize = 0;
+                    // Keep connection alive after write
+                    if (!ATOMIC_LOAD_BOOL(&pSignalingClient->shutdown)) {
+                        lws_callback_on_writable(wsi);
+                    }
+                    ATOMIC_STORE(&pSignalingClient->messageResult, (SIZE_T) SERVICE_CALL_RESULT_OK);
+                    // Signal completion immediately after successful write
+                    CVAR_BROADCAST(pSignalingClient->sendCvar);
+                }
             }
+            // Always return success from writeable callback
+            retValue = 0;
 
             break;
 
@@ -569,8 +607,10 @@ STATUS lwsCompleteSync(PLwsCallInfo pCallInfo)
     // Execute the LWS REST call
     MEMSET(&connectInfo, 0x00, SIZEOF(struct lws_client_connect_info));
     connectInfo.context = pContext;
-    connectInfo.ssl_connection = LCCSCF_USE_SSL;
+    connectInfo.ssl_connection = LCCSCF_USE_SSL | LCCSCF_H2_QUIRK_OVERFLOWS_TXCR; // Add flag to handle H2 flow control
     connectInfo.port = SIGNALING_DEFAULT_SSL_PORT;
+    connectInfo.alpn = "http/1.1";     // Force HTTP/1.1 only
+    connectInfo.protocol = "http/1.1"; // Force HTTP/1.1 protocol
 
     CHK_STATUS(getRequestHost(pCallInfo->callInfo.pRequestInfo->url, &pHostStart, &pHostEnd));
     CHK(pHostEnd == NULL || *pHostEnd == '/' || *pHostEnd == '?', STATUS_INTERNAL_ERROR);
@@ -1344,6 +1384,7 @@ STATUS createLwsCallInfo(PSignalingClient pSignalingClient, PRequestInfo pReques
     pLwsCallInfo->callInfo.pRequestInfo = pRequestInfo;
     pLwsCallInfo->pSignalingClient = pSignalingClient;
     pLwsCallInfo->protocolIndex = protocolIndex;
+    ATOMIC_STORE_BOOL(&pLwsCallInfo->receiveMessage, FALSE);
 
     *ppLwsCallInfo = pLwsCallInfo;
 
@@ -1907,6 +1948,9 @@ STATUS writeLwsData(PSignalingClient pSignalingClient, BOOL awaitForResponse)
     SIZE_T offset, size;
     SERVICE_CALL_RESULT result;
 
+    UINT32 retryCount = 0;
+    const UINT32 MAX_RETRY_COUNT = 3;
+
     CHK(pSignalingClient != NULL && pSignalingClient->pOngoingCallInfo != NULL, STATUS_NULL_ARG);
 
     // See if anything needs to be done
@@ -1920,22 +1964,36 @@ STATUS writeLwsData(PSignalingClient pSignalingClient, BOOL awaitForResponse)
 
     MUTEX_LOCK(pSignalingClient->sendLock);
     sendLocked = TRUE;
-    while (iterate) {
+    while (iterate && retryCount < MAX_RETRY_COUNT) {
         offset = ATOMIC_LOAD(&pSignalingClient->pOngoingCallInfo->sendOffset);
         size = ATOMIC_LOAD(&pSignalingClient->pOngoingCallInfo->sendBufferSize);
 
         result = (SERVICE_CALL_RESULT) ATOMIC_LOAD(&pSignalingClient->messageResult);
 
         if (offset != size && result == SERVICE_CALL_RESULT_NOT_SET) {
             CHK_STATUS(CVAR_WAIT(pSignalingClient->sendCvar, pSignalingClient->sendLock, SIGNALING_SEND_TIMEOUT));
+            retryCount++;
+        } else if (result == SERVICE_CALL_UNKNOWN) {
+            // Partial write occurred, continue waiting
+            retryCount = 0;
+            continue;
         } else {
             iterate = FALSE;
         }
+        if (iterate) {
+            // Wake up the service event loop
+            CHK_STATUS(wakeLwsServiceEventLoop(pSignalingClient, PROTOCOL_INDEX_WSS));
+        }
     }
-
     MUTEX_UNLOCK(pSignalingClient->sendLock);
     sendLocked = FALSE;
 
+    // Check if we timed out
+    if (retryCount >= MAX_RETRY_COUNT) {
+        DLOGW("Failed to send data after %d attempts", MAX_RETRY_COUNT);
+        CHK(FALSE, STATUS_SIGNALING_MESSAGE_DELIVERY_FAILED);
+    }
+
     // Do not await for the response in case of correlation id not specified
     CHK(awaitForResponse, retStatus);
 

src/source/Signaling/LwsApiCalls.h

@@ -208,6 +208,9 @@ struct __LwsCallInfo {
     // Service exit indicator;
     volatile ATOMIC_BOOL cancelService;
 
+    // Message receiving indicator
+    volatile ATOMIC_BOOL receiveMessage;
+
     // Protocol index
     UINT32 protocolIndex;