STM32WL astyle

Author: jeromecoutant

targets/TARGET_STM/TARGET_STM32WL/TARGET_STM32WL55xC/TARGET_NUCLEO_WL55JC/PeripheralNames.h

@@ -35,7 +35,7 @@ typedef enum {
 
 typedef enum {
     UART_1 = (int)USART1_BASE,
-	UART_2 = (int)USART2_BASE,
+    UART_2 = (int)USART2_BASE,
     LPUART_1 = (int)LPUART1_BASE
 } UARTName;
 

targets/TARGET_STM/TARGET_STM32WL/TARGET_STM32WL55xC/TARGET_NUCLEO_WL55JC/system_clock.c

@@ -39,31 +39,31 @@
 
 MBED_WEAK void SetSysClock(void)
 {
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
 
-  /** Configure the main internal regulator output voltage
-  */
-  __HAL_RCC_PWR_CLK_ENABLE();
-  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
-  /** Initializes the CPU, AHB and APB busses clocks
-  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
-  RCC_OscInitStruct.MSIState = RCC_MSI_ON;
-  RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
-  RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
-  MBED_ASSERT(HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK);
-  /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3|RCC_CLOCKTYPE_HCLK
-                              |RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1
-                              |RCC_CLOCKTYPE_PCLK2;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
-  RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1;
-  MBED_ASSERT(HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) == HAL_OK);
-  /* Peripheral clock enable */
+    /** Configure the main internal regulator output voltage
+    */
+    __HAL_RCC_PWR_CLK_ENABLE();
+    __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+    /** Initializes the CPU, AHB and APB busses clocks
+    */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+    RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+    RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
+    RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+    MBED_ASSERT(HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK);
+    /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3 | RCC_CLOCKTYPE_HCLK
+                                  | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1
+                                  | RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1;
+    MBED_ASSERT(HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) == HAL_OK);
+    /* Peripheral clock enable */
 }

targets/TARGET_STM/TARGET_STM32WL/serial_device.c

@@ -125,7 +125,7 @@ void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
             __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
             // Check if RxIrq is disabled too
             if ((huart->Instance->CR1 & USART_CR1_RXNEIE_RXFNEIE) == 0) {
-				
+
                 all_disabled = 1;
             }
         }