update language reference links

Author: Renat0Ribeir0

content/Hardware Support/Generic/About-the-AREF-pin.md

@@ -22,8 +22,8 @@ Not all boards have an enabled AREF pin, and it doesn't work the same way on all
         <li>Arduino megaAVR Boards (Uno WiFi Rev2)</li>
       </ul>
     <td>
-      <p>External reference voltage can be read from the AREF pin. Enable it by calling <a href="https://www.arduino.cc/reference/en/language/functions/analog-io/analogreference/">analogReference()</a> with the appropriate option for your board, i.e. <code>analogReference(EXTERNAL)</code> for AVR boards.</p>
-      <blockquote><b>Note:</b> To avoid damaging your board, read the library reference's <a href="https://www.arduino.cc/reference/en/language/functions/analog-io/analogreference/#_notes_and_warnings">notes and warnings</a> section before using an external reference voltage.</blockquote>
+      <p>External reference voltage can be read from the AREF pin. Enable it by calling <a href="https://docs.arduino.cc/language-reference/en/functions/analog-io/analogReference/">analogReference()</a> with the appropriate option for your board, i.e. <code>analogReference(EXTERNAL)</code> for AVR boards.</p>
+      <blockquote><b>Note:</b> To avoid damaging your board, read the library reference's <a href="https://docs.arduino.cc/language-reference/en/functions/analog-io/analogReference/#notes-and-warnings">notes and warnings</a> section before using an external reference voltage.</blockquote>
     </td>
   </tr>
   <tr>

content/Hardware Support/Generic/Use-PWM-output-with-Arduino.md

@@ -9,7 +9,7 @@ Learn how to use PWM (Pulse Width Modulation) output with Arduino.
 
 ## Using PWM in your sketch
 
-Add PWM output to your sketch using the [analogWrite()](https://www.arduino.cc/reference/en/language/functions/analog-io/analogwrite/) function.
+Add PWM output to your sketch using the [analogWrite()](https://docs.arduino.cc/language-reference/en/functions/analog-io/analogWrite/) function.
 
 Here's a basic example:
 

content/Hardware Support/Nano Family/About-the-analog-pins-on-Nano-RP2040-Connect.md

@@ -11,8 +11,8 @@ The microcontroller on the Nano RP2040 Connect has four analog pins, connected t
 
 **Pins A0–A3** are connected to the board's microcontroller (Raspberry Pi RP2040). These pins can be used like analog pins on most other Arduino boards:
 
-* Write to a pin with [analogWrite()](https://www.arduino.cc/reference/en/language/functions/analog-io/analogwrite/)
-* Read from a pin with [analogRead()](https://www.arduino.cc/reference/en/language/functions/analog-io/analogread/)
+* Write to a pin with [analogWrite()](https://docs.arduino.cc/language-reference/en/functions/analog-io/analogWrite/)
+* Read from a pin with [analogRead()](https://docs.arduino.cc/language-reference/en/functions/analog-io/analogRead/)
 
 If possible, try to use these pins for your project.
 
@@ -51,7 +51,7 @@ _*With WIFINina firmware 1.4.8 or earlier, the range for these pins are 0.0–1.
 
 ## Increase the analogRead resolution
 
-The `analogRead()` function returns 10-bit values (0–1023) by default. You can increase the resolution to 12-bit (0–4095) with the [analogReadResolution()](https://www.arduino.cc/reference/en/language/functions/analog-io/analogreadresolution/) function. Just add this code to your `setup()` function:
+The `analogRead()` function returns 10-bit values (0–1023) by default. You can increase the resolution to 12-bit (0–4095) with the [analogReadResolution()](https://docs.arduino.cc/language-reference/en/functions/analog-io/analogReadResolution/) function. Just add this code to your `setup()` function:
 
 ```arduino
 analogReadResolution(12);

content/Hardware Support/Nano Family/Control-the-RGB-LED-on-Nano-33-BLE-boards.md

@@ -30,7 +30,7 @@ You can then set the value for each channel with the [`digitalWrite(pin, value)`
 > [!IMPORTANT]
 > The RGB pins are **active-low**. This means that the pin is activated (turning on the LED) when the voltage is low.
 
-To control the brightness or produce different colors, use the [`analogWrite(pin, value)`](https://www.arduino.cc/reference/en/language/functions/analog-io/analogwrite/) function. For the `value` parameter, you can use a number from `0` to `255`. Because the RGB pins are active-low, a value of `0` will activate the pin's LED at full brightness, while a value of `255` turns it off completely.
+To control the brightness or produce different colors, use the [`analogWrite(pin, value)`](https://docs.arduino.cc/language-reference/en/functions/analog-io/analogWrite/) function. For the `value` parameter, you can use a number from `0` to `255`. Because the RGB pins are active-low, a value of `0` will activate the pin's LED at full brightness, while a value of `255` turns it off completely.
 
 * `analogWrite(LEDG, 255)` – turn the GREEN LED **off**.
 * `analogWrite(LEDB, 128)` – turn the RED channel **off**.

content/Hardware Support/Nano Family/How-to-change-the-ADC-resolution.md

@@ -7,4 +7,4 @@ The Arduino Nano 33 BLE has the ability to change its analog read resolution inc
 
 To achieve this there is another function called `analogReadResolution()` that sets the size (in bits) of the value returned by `analogRead()`.
 
-See the [analogReadResolution()](https://www.arduino.cc/reference/en/language/functions/analog-io/analogreadresolution/) page for more information on how to change the ADC resolution.
+See the [analogReadResolution()](https://docs.arduino.cc/language-reference/en/functions/analog-io/analogReadResolution/) page for more information on how to change the ADC resolution.

content/Hardware Support/Portenta Family/About-ADC-reference-voltage-on-Portenta-H7.md

@@ -3,7 +3,7 @@ title: "About ADC reference voltage on Portenta H7"
 id: 4753980038812
 ---
 
-The **analog-to-digital converter** (ADC) on Portenta H7 switches between internal and external reference voltage automatically, so unlike some other boards, [analogReference()](https://www.arduino.cc/reference/en/language/functions/analog-io/analogreference/) should **not** be used.
+The **analog-to-digital converter** (ADC) on Portenta H7 switches between internal and external reference voltage automatically, so unlike some other boards, [analogReference()](https://docs.arduino.cc/language-reference/en/functions/analog-io/analogReference/) should **not** be used.
 
 <a id="internal-reference"></a>
 

content/Hardware Support/UNO/Debug-runtime-errors-on-UNO-R4-WiFi-using-stack-trace.md

@@ -11,7 +11,7 @@ The UNO R4 WiFi uses [CmBacktrace](https://github.com/armink/CmBacktrace) to pri
 
 Follow these steps:
 
-1. Ensure that a serial connection must be initiated before the error occurs, by calling [Serial.begin()](https://www.arduino.cc/reference/en/language/functions/communication/serial/begin/) in your sketch. You can include this code inside the beginning of the `setup()` function:
+1. Ensure that a serial connection must be initiated before the error occurs, by calling [Serial.begin()](https://docs.arduino.cc/language-reference/en/functions/communication/Serial/begin/) in your sketch. You can include this code inside the beginning of the `setup()` function:
 
    ```arduino
    Serial.begin(115200);
@@ -109,7 +109,7 @@ Follow these steps:
 2. Open the sketch in Arduino IDE and find the line number from the previous step (the number is displayed to the left of each line).
 3. Analyze the row where the error occurred and try to understand what may be triggering the error.
 
-   * If you're not sure, use the [Serial.println()](https://www.arduino.cc/reference/en/language/functions/communication/serial/println/) function to output the values of any variables being used. Then upload the sketch again, and use the serial output to see what the states of those variables were before the error occurred.
+   * If you're not sure, use the [Serial.println()](https://docs.arduino.cc/language-reference/en/functions/communication/Serial/println/) function to output the values of any variables being used. Then upload the sketch again, and use the serial output to see what the states of those variables were before the error occurred.
 
    * To see from where the function was called, look at the preceding function call in the `addr2line` output.
 

content/Software Support/Compilation/Error-call-of-overloaded-write-int-is-ambiguous.md

@@ -19,4 +19,4 @@ To solve this problem, you can force the function to read the provided value as
  Serial.write((byte) 0x00);
 ```
 
-It is always recommended to use the [print() function](https://www.arduino.cc/reference/en/language/functions/communication/serial/print/) instead, as explained in the [Serial.write() function](https://www.arduino.cc/reference/en/language/functions/communication/serial/write/) reference page.
+It is always recommended to use the [print() function](https://docs.arduino.cc/language-reference/en/functions/communication/Serial/print/) instead, as explained in the [Serial.write() function](https://docs.arduino.cc/language-reference/en/functions/communication/Serial/write/) reference page.

content/Software Support/Compilation/Reduce-the-size-and-memory-usage-of-your-sketch.md

@@ -37,7 +37,7 @@ Learn how to reduce the size and memory usage of your sketch.
 * **Minimize array sizes.** Don't declare larger arrays than needed.
 * **Check your libraries** to save storage. Avoid [including](https://www.arduino.cc/reference/tr/language/structure/further-syntax/include/) large libraries unless you need to. Save storage by implementing your own code that only does what you need.
 
-* **Store constant data in storage instead of memory** with [PROGMEM](https://www.arduino.cc/reference/en/language/variables/utilities/progmem/).
+* **Store constant data in storage instead of memory** with [PROGMEM](https://docs.arduino.cc/language-reference/en/variables/utilities/PROGMEM/).
 
 > [!NOTE]
 > Arduino sketches are written in the Arduino language, which is based on standard C++. Therefore, using general C++ optimization techniques will help.

content/Software Support/IDE Settings/If-you-get-unexpected-zeroes-using-Serial-parseInt-or-Serial-parseFloat.md

@@ -13,4 +13,4 @@ If your `loop()` function is calling the parsing function when `Serial.available
 You can solve the problem by:
 
 - Selecting **No line ending** in the Serial Monitor.
-- Using the [Serial.read()](https://www.arduino.cc/reference/en/language/functions/communication/serial/read/) and define your own logic for reading the buffer.
+- Using the [Serial.read()](https://docs.arduino.cc/language-reference/en/functions/communication/Serial/read/) and define your own logic for reading the buffer.