Update Configure-GIGA-R1-WiFi-for-Over-The-Air-OTA-uploads.md

Author: Renat0Ribeir0

content/Hardware Support/GIGA R1/Configure-GIGA-R1-WiFi-for-Over-The-Air-OTA-uploads.md

@@ -1,9 +1,13 @@
 ---
-title: Configure GIGA R1 WiFi for Over-The-Air (OTA) uploads
+title: Configure GIGA R1 WiFi, Portenta H7, and Portenta Machine Control for Over-The-Air (OTA) uploads
 id: 12370721200540
 ---
 
-Learn how to enable [Over-The-Air (OTA) uploads](https://docs.arduino.cc/arduino-cloud/features/ota-getting-started/) for your GIGA R1 WiFi board.
+Learn how to enable [Over-The-Air (OTA) uploads](https://docs.arduino.cc/arduino-cloud/features/ota-getting-started/) for:
+
+* GIGA R1 WiFi
+* Portenta H7
+* Portenta Machine Control
 
 Follow these steps if you experience any of these errors when attempting an OTA upload:
 
@@ -12,32 +16,51 @@ Follow these steps if you experience any of these errors when attempting an OTA
 
 ---
 
-## 1. Connect your GIGA R1 WiFi board to Arduino IDE
+## 1. Connect your board to Arduino IDE
 
 > [!IMPORTANT]
 > The required sketch examples are currently not available in the Web Editor.
 
 1. Open Arduino IDE.
 
-1. Connect your GIGA R1 WiFi to your computer with a USB-C cable.
+1. Connect the board to your computer with a USB-C cable.
 
-1. Open the board selector and **Arduino Giga R1** or use the Tools > Port and Tools > Board menus.
+1. Select your board in the board selector, or use the _Tools > Port_ and _Tools > Board_ menus.
 
 ---
 
 ## 2. Format the flash memory
 
-First, you need to format the board's Quad Serial Peripheral Interface (QSPI) flash memory.
+Format the board's Quad Serial Peripheral Interface (QSPI) flash memory.
 
 **Follow these steps:**
 
-1. Connect your GIGA R1 WiFi to your computer using a USB-C cable.
+1. In the top menu bar, open **File > Examples > STM32H747_System > QSPIFormat**.
+
+1. Click ![Upload button](img/symbol_upload2.png) **Upload** to upload the sketch.
+
+1. Open the Serial Monitor using one of these methods:
+
+   * Click the ![Serial Monitor button](img/symbol_monitor.png) button in the top-right corner.
+
+   * Select _Tools > Serial Monitor_ in the menu bar.
+
+1. If the Serial Monitor is empty, run the sketch again by pressing the **RST** button on the board.
+
+1. This message should appear:
 
-1. Select your GIGA R1 WiFi in the board selector, or use the _Tools > Port_ and _Tools > Board_ menus.
+   `Do you want to use partition scheme 1? Y/[n]`
+   `If No, partition scheme 2 will be used.`
+
+   If you do, type `Y` into the text field and press <kbd>Enter</kbd> to send.
 
-1. In the top menu bar, open **File > Examples** list. Under the _Examples for Arduino Giga R1_ group, select **STM32H747_System > QSPIFormat**.
+1. Followed by this message:
 
-1. Click ![Upload button](img/symbol_upload2.png) **Upload** and wait for the sketch upload to complete.
+   `WARNING! Running the sketch all the content of the QSPI flash will be erased. Do you want to proceed? Y/[n]`
+
+   If you do, type `Y` into the text field and press <kbd>Enter</kbd> to send.
+
+1. Wait until `QSPI Flash formatted!` appears in the Serial Monitor output.
 
 ---
 
@@ -61,8 +84,6 @@ Flash the latest Wi-Fi firmware version to the board.
 
 1. If the Serial Monitor is empty, run the sketch again by pressing the **RST** button on the board.
 
-   ![The RST button on GIGA R1 WiFi.](img/GIGA-R1-button-RST.png)
-
 1. If you get this message:
 
    `A WiFi firmware is already installed. Do you want to install the firmware anyway? Y/[n]`