Arduino SIM EoL [HC-1609] (#442)

* removed all mentions of Arduino SIM

* Apply suggestions from code review

Co-authored-by: Renat0Ribeir0 <86349945+Renat0Ribeir0@users.noreply.github.com>

* rename article

---------

Co-authored-by: Renat0Ribeir0 <86349945+Renat0Ribeir0@users.noreply.github.com>

Author: gorillagripcore

content/Arduino Cloud/Arduino IoT Cloud/Add-and-connect-a-device-to-Arduino-Cloud.md

@@ -61,7 +61,6 @@ You'll need an Arduino account and the [Arduino Cloud Agent](https://support.ard
    * Click the **Network configure** button and enter the network credentials.
 
       * _Wi-Fi:_ Enter your Wi-Fi name (SSID) and password (encryption key).
-      * _Arduino SIM:_ [Use these credentials](https://support.arduino.cc/hc/en-us/articles/360013825159-What-are-the-credentials-for-the-Arduino-SIM-card).
       * _Arduino with LoRa<sup>®</sup>:_ The credentials are added automatically.
       * _ESP32 and ESP8266:_ Enter the secret key that was provided when adding the device.
 

content/Arduino Cloud/Arduino SIM Card/How-to-connect-the-MKR-GSM-1400-to-Arduino-Cloud.md renamed to content/Arduino Cloud/Arduino IoT Cloud/How-to-connect-the-MKR-GSM-1400-to-Arduino-Cloud.md

@@ -8,7 +8,7 @@ The [Arduino MKR GSM 1400](https://store.arduino.cc/arduino-mkr-gsm-1400-1415) h
 ## What you'll need
 
 * An Arduino MKR GSM 1400
-* An [activated SIM card from Arduino](https://support.arduino.cc/hc/en-us/articles/360021543440) or some other service provider.
+* A SIM card with GSM/3G service
 * A GSM/3G antenna with a micro UFL connector (such as the one included in the [cellular kit](https://store.arduino.cc/arduino-sim-mkr-gsm-1400-cellular-kit-1417)).
 
 ---
@@ -57,28 +57,7 @@ The micro UFL port and the SIM tray are highlighted respectively in the image be
 
    ![The "Configure" button, under "Network".](img/IoT-SIM-configure-network-2.png)
 
-5. Enter your network parameters. If you are configuring an Arduino SIM, use the following parameters:
-
-   <table>
-    <tr>
-      <th>APN</th>
-      <td>prepay.pelion</td>
-    </tr>
-    <tr>
-      <th>PIN</th>
-      <td>0000</td>
-    </tr>
-    <tr>
-      <th>Username</th>
-      <td>arduino</td>
-    </tr>
-    <tr>
-      <th>Password</th>
-      <td>arduino</td>
-    </tr>
-   </table>
-
-   Otherwise, use the parameters provided by your SIM provider.
+5. Enter the network parameters provided by your SIM provider.
 
 6. Click the **SAVE** button.
 

content/Arduino Cloud/Arduino IoT Cloud/If-the-sketch-uploads-but-the-device-isn-t-online.md

@@ -12,8 +12,8 @@ id: 13459093156764
 
 2. Go to the [Things tab](https://app.arduino.cc/things) and open the Thing that's associated with your device. Then go to the [Devices tab](https://app.arduino.cc/devices), and find your device in the list. Under **Network**, click on **Change** and verify that your credentials are correct.
 
-   * **Wi-Fi:** Make sure the name (also called _SSID_) and password (also called _encryption key_ or just _key_) are correct. The password can be revealed by clicking the eye symbol. If you don't know your network name or password, contact your network administrator or the manufacturer of your Wi-Fi access point. If your device has a secret key, make sure it's entered correctly (if you're unsure, remove and re-add the device to generate a new key).
-   * **Arduino SIM:** [Use these credentials](https://support.arduino.cc/hc/en-us/articles/360013825159). Make sure a working GSM antenna is connected to the board and that an Arduino SIM plan is activated with [your account](https://store.arduino.cc/digital/subscriptions/plans).
+   > [!NOTE]
+   >  Make sure the name (also called _SSID_) and password (also called _encryption key_ or just _key_) are correct. The password can be revealed by clicking the eye symbol. If you don't know your network name or password, contact your network administrator or the manufacturer of your Wi-Fi access point. If your device has a secret key, make sure it's entered correctly (if you're unsure, remove and re-add the device to generate a new key).
 
 3. Open the Thing's **Sketch tab**. Make sure the right device is selected and re-upload the sketch.