Content update (tech specs table)

Author: canchebagur

content/hardware/03.nano/boards/nano-33-ble-sense-rev2/tech-specs.md

@@ -4,7 +4,7 @@ The Arduino Nano 33 BLE Sense Rev2 operates at +3.3 VDC. Never apply more than +
 
 The 5V pin (between RST and A7) is not connected by default as a safety precaution. To enable the +5 VDC output on this pin:
 
-1. Create a solder bridge on the VUSB pads
-2. Power the board via USB (+5 VDC will not be available when powered through VIN)
+- Create a solder bridge on the VUSB pads
+- Power the board via USB (+5 VDC will not be available when powered through VIN)
 
 The 3V3 pin is always available and provides sufficient current for sensors and actuators. When interfacing with +5 VDC systems, use appropriate level shifters to protect the board's inputs.

content/hardware/03.nano/boards/nano-33-ble-sense-rev2/tutorials/01.user-manual/content.md

@@ -391,8 +391,6 @@ Additionally, you can open the Arduino IDE's Serial Monitor (Tools > Serial Moni
 
 ## Pins
 
-## Pins
-
 This user manual section provides comprehensive information about the Nano 33 BLE Sense Rev2's pin capabilities and functionality. Understanding the board's pins capabilities and configurations is important for making the most of your projects with the Nano 33 BLE Sense Rev2 board.
 
 ### Pins Overview