Carrier platform USB-C® requirement update

Author: TaddyHC

content/hardware/04.pro/carriers/portenta-hat-carrier/tutorials/user-manual/content.md

@@ -43,7 +43,7 @@ To use the [Portenta Hat Carrier](https://store.arduino.cc/products/portenta-hat
 
 Additionally, the following accessories are needed:
 
-- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 - Wi-Fi® Access Point or Ethernet with Internet access (x1)
 
 ### Software Requirements

content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/catm1-and-nbiot/content.md

@@ -33,12 +33,12 @@ The goals of this project are:
 
 ## Hardware & Software Needed
 
-- Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software)).
 - [Portenta H7](https://store.arduino.cc/products/portenta-h7)
 - Antenna with GSM 850 / 900 / 1800 / 1900 MHz range and the ability to connect via SMA
 - DC 4.5-20V power supply with barrel jack.
 - [Portenta Max carrier](https://store.arduino.cc/products/portenta-max-carrier)
 - [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software) or [Arduino IDE 2.0+](https://www.arduino.cc/en/software)
 
 ## Instructions
 

content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/mpcie-4g-modem/content.md

@@ -34,7 +34,7 @@ The hands-on part of this tutorial will walk you through performing a speed test
 
 * [Portenta Max Carrier](https://store.arduino.cc/products/portenta-max-carrier) (x1)
 * [Portenta X8](https://store.arduino.cc/products/portenta-x8) (x1)
-* Pro 4G Module (GNSS Module Global / EMEA) (x1)
+* Pro 4G Module ([GNSS Module Global](https://store.arduino.cc/products/4g-module-global?queryID=undefined) / [EMEA](https://store.arduino.cc/products/4g-module-emea?queryID=undefined)) (x1)
 * Compatible antennas like the [Arduino Pro 4G Module Antennas Kit](https://store.arduino.cc/products/4g-module-antenna) (x1)
 
 The following accessories are needed:

content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/user-manual/content.md

@@ -41,7 +41,7 @@ This user manual offers a detailed guide on the Portenta Max Carrier, consolidat
 * [Portenta X8](https://store.arduino.cc/products/portenta-x8) (x1)
 * [Portenta C33](https://store.arduino.cc/products/portenta-c33) (x1)
 * [Portenta H7](https://store.arduino.cc/products/portenta-h7) (x1)
-* [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
+* [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 * Wi-Fi® Access Point or Ethernet with Internet access (x1)
 * Compatible antennas like the [Arduino Pro 4G Module Antennas Kit](https://store.arduino.cc/products/4g-module-antenna) (x1)
 
@@ -216,9 +216,9 @@ The Portenta Max Carrier incorporates two DIP switches, giving users the ability
 
 For configurations when the Portenta Max Carrier is combined with the Portenta boards, the DIP switch governs these settings:
 
-| **Ethernet DIP Switch Designation** | **Position: ON**  | **Position: OFF** |
-|:-----------------------------------:|:-----------------:|:-----------------:|
-|                1 - 2                | Ethernet Disabled for X8 / Enabled for H7/C33 | Ethernet Enabled for X8 / Disabled for H7/C33  |
+| **Ethernet DIP Switch Designation** |               **Position: ON**                |               **Position: OFF**               |
+|:-----------------------------------:|:---------------------------------------------:|:---------------------------------------------:|
+|                1 - 2                | Ethernet Disabled for X8 / Enabled for H7/C33 | Ethernet Enabled for X8 / Disabled for H7/C33 |
 
 For an in-depth understanding of the DIP switch, kindly refer to [this section](#dip-switch-configuration).
 

content/hardware/04.pro/carriers/portenta-mid-carrier/tutorials/user-manual/content.md

@@ -44,8 +44,9 @@ The **Portenta Mid Carrier** requires one of the SOM boards from the Portenta Fa
 
 The following accessories are needed:
 
-- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 - Wi-Fi® Access Point or Ethernet with Internet access (x1)
+- Pro 4G Module ([GNSS Module Global](https://store.arduino.cc/products/4g-module-global?queryID=undefined) / [EMEA](https://store.arduino.cc/products/4g-module-emea?queryID=undefined)) (x1)
 - Compatible antennas like the [Arduino Pro 4G Module Antennas Kit](https://store.arduino.cc/products/4g-module-antenna) (x1)
 - Power cables: Wires with a cross-sectional area ranging from 0.82 mm² to 1.3 mm², corresponding to AWG sizes 18 to 16