Merge pull request #1619 from arduino/jacobhylen/hero-core

karlsoderby · web-flow · commit 007093b4bc7d · 2023-12-21T13:26:57.000+01:00
[MKC-1373]Hero Core --&gt; Board Package
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/adc-resolution/adc-resolution.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/adc-resolution/adc-resolution.md
@@ -19,7 +19,7 @@ The goals of this tutorials are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino R4 Minima](https://store.arduino.cc/uno-r4-minima)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started)
 
 ## Analog-to-Digital Converter (ADC) 
 
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/can/can.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/can/can.md
@@ -21,7 +21,7 @@ The goals of this tutorial are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino R4 Minima](https://store.arduino.cc/uno-r4-minima)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started)
 - CAN transceiver module * 
 - Jumper wires
 
@@ -57,9 +57,9 @@ Then, between the CAN transceivers, connect the following:
 
 ## Code Examples
 
-The following code examples needs to be uploaded to each of the UNO R4 Minima boards, one will send a message, one will receive it. These examples are available in the Renesas core, and using the Arduino IDE, you can access them by navigating to **File > Examples > Arduino_CAN > CANWrite/CANRead**
+The following code examples needs to be uploaded to each of the UNO R4 Minima boards, one will send a message, one will receive it. These examples are available in the UNO R4 Board Package, and using the Arduino IDE, you can access them by navigating to **File > Examples > Arduino_CAN > CANWrite/CANRead**
 
-The library used is built in to the core, so no need to install the library if you have the core installed.
+The library used is built in to the Board Package, so no need to install the library if you have the Board Package installed.
 
 To initialize the library, use `CAN.begin(CanBitRate::BR_250k)`, where a CAN bit rate is specified. Choose between:
 - BR_125k (125000)
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/cheat-sheet/cheat-sheet.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/cheat-sheet/cheat-sheet.md
@@ -44,9 +44,9 @@ If you’re using the USB-C® connector you must power it with 5 V.
 When powered via USB, you are bypassing the onboard voltage regulator completely. In this case, the 5 V pin can provide up to 2 A without damaging the board. 
 
 
-## Core
+## Board Package
 
-The UNO R4 Minima is based on the [Arduino Core for Renesas devices](https://github.com/arduino/ArduinoCore-renesas).
+The UNO R4 Minima is based on the [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started).
 
 ## Installation
 
@@ -60,7 +60,7 @@ Read more in the [Getting Started with the UNO R4 Minima](/tutorials/uno-r4-mini
 
 ### Arduino Web Editor
 
-The Web Editor is an online IDE that includes all official boards, no need for installing the core/package. You will need the Create Plugin installed on your computer to use the Web Editor.
+The Web Editor is an online IDE that includes all official boards, no need for installing the Board Package. You will need the Create Plugin installed on your computer to use the Web Editor.
 
 Read more in the [Getting Started with the Web Editor](https://docs.arduino.cc/arduino-cloud/getting-started/getting-started-web-editor) guide.
 
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/debugger/debugger.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/debugger/debugger.md
@@ -32,7 +32,7 @@ The goals of this tutorial are:
 
 - [Arduino IDE](https://www.arduino.cc/en/main/software)
 - [Arduino R4 Minima](https://store.arduino.cc/uno-r4-minima)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started)
 - [Segger J-Link](https://www.segger.com/products/debug-probes/j-link/)
 - [Ozone](https://www.segger.com/products/development-tools/ozone-j-link-debugger/)
 
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/eeprom/eeprom.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/eeprom/eeprom.md
@@ -20,7 +20,7 @@ The goals of this tutorials are:
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software)) 
 - USB-C cable 
 - [Arduino R4 Minima](/hardware/uno-r4-minima)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started)
 
 ## EEPROM
 
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/minima-getting-started/minima-getting-started.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/minima-getting-started/minima-getting-started.md
@@ -5,7 +5,7 @@ author: Hannes Siebeneicher
 tags: [UNO R4 Minima, Installation, IDE]
 ---
 
-To use the [Arduino UNO R4 Minima](/hardware/uno-r4-minima) board, you will need to install the UNO R4 Minima board package, which is part of the [Arduino Core for Renesas devices](https://github.com/arduino/ArduinoCore-renesas).
+To use the [Arduino UNO R4 Minima](/hardware/uno-r4-minima) board, you will need to install the UNO R4 Minima Board Package.
 
 To install it, you will need a version of the Arduino IDE, which you can download from the [Arduino Software page](https://www.arduino.cc/en/software). In this guide, we will use the latest version of the IDE 2.
 
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/rtc/rtc.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/rtc/rtc.md
@@ -21,11 +21,11 @@ The goals of this project are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino R4 Minima](https://store.arduino.cc/uno-r4-minima)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started)
 
 ## Real-Time Clock (RTC)
 
-The RTC on the UNO R4 Minima can be accessed using the [RTC](https://github.com/arduino/ArduinoCore-renesas/tree/main/libraries/RTC) library that is included in the [Renesas](https://github.com/arduino/ArduinoCore-renesas) core. This library allows you to set/get the time as well as using alarms to trigger interrupts. 
+The RTC on the UNO R4 Minima can be accessed using the [RTC](https://github.com/arduino/ArduinoCore-renesas/tree/main/libraries/RTC) library that is included in the [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started). This library allows you to set/get the time as well as using alarms to trigger interrupts. 
 
 There are many practical examples using an RTC, and the examples provided in this page will help you get started with it.
 
diff --git a/content/hardware/02.hero/boards/uno-r4-minima/tutorials/usb-hid/usb-hid.md b/content/hardware/02.hero/boards/uno-r4-minima/tutorials/usb-hid/usb-hid.md
@@ -24,15 +24,15 @@ The goals of this tutorials are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino R4 Minima](https://store.arduino.cc/uno-r4-minima)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-minima/minima-getting-started)
 
 ## Human Interface Device (HID) 
 
 Human interface devices (HID) are devices designed for humans (keyboards, mice, game controllers etc.), that frequently sends data over USB to a computer. When you press a key on a keyboard, you send data to a computer, which reads it and in turn activates the corresponding key.
 
 The UNO R4 Minima has built-in support for HID, a feature found on most modern day development boards, but not on previous UNO revisions. 
 
-To turn your board into an HID, you can use the **keyboard/mouse** API that is built in to the core. You can visit the documentation for this API in the language reference at:
+To turn your board into an HID, you can use the **keyboard/mouse** API that is built in to the Board Package. You can visit the documentation for this API in the language reference at:
 - [Keyboard](https://www.arduino.cc/reference/en/language/functions/usb/keyboard/)
 - [Mouse](https://www.arduino.cc/reference/en/language/functions/usb/mouse/)
 
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/adc-resolution/adc-resolution.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/adc-resolution/adc-resolution.md
@@ -21,7 +21,7 @@ The goals of this tutorials are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino R4 WiFi](https://store.arduino.cc/uno-r4-wifi)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started)
 
 ## Analog-to-Digital Converter (ADC) 
 
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/can/can.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/can/can.md
@@ -23,7 +23,7 @@ The goals of this tutorial are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino R4 WiFi](https://store.arduino.cc/uno-r4-wifi)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started)
 - CAN transceiver module *
 - Jumper wires
 
@@ -59,9 +59,9 @@ Then, between the CAN transceivers, connect the following:
 
 ## Code Examples
 
-The following code examples need to be uploaded to each of the UNO R4 WiFi boards, one will send a message, one will receive it. These examples are available in the Renesas core, and using the Arduino IDE, you can access them by navigating to **File > Examples > Arduino_CAN > CANWrite/CANRead**
+The following code examples need to be uploaded to each of the UNO R4 WiFi boards, one will send a message, one will receive it. These examples are available in the UNO R4 Board Package, and using the Arduino IDE, you can access them by navigating to **File > Examples > Arduino_CAN > CANWrite/CANRead**
 
-The library used is built into the core, so no need to install the library if you have the core installed.
+The library used is built into the Board Package, so no need to install the library if you have the Board Package installed.
 
 To initialize the library, use `CAN.begin(CanBitRate::BR_250k)`, where a CAN bit rate is specified. Choose between:
 - BR_125k (125000)
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/cheat-sheet/cheat-sheet.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/cheat-sheet/cheat-sheet.md
@@ -44,9 +44,9 @@ If you’re using the USB-C® connector you must power it with 5 V.
 
 When powered via USB, you are bypassing the onboard voltage regulator completely. In this case, the 5 V pin can provide up to 2 A without damaging the board. 
 
-## Core
+## Board Package
 
-The UNO R4 WiFi is based on the [Arduino UNO R4 Core](https://github.com/arduino/ArduinoCore-renesas).
+The UNO R4 WiFi is based on the [Arduino UNO R4 Board Package](/tutorials/uno-r4-minima/r4-wifi-getting-starteds).
 
 ## Installation
 
@@ -60,7 +60,7 @@ Read more in the [Getting Started with the UNO R4 WiFi](/tutorials/uno-r4-wifi/r
 
 ### Arduino Web Editor
 
-The Web Editor is an online IDE that includes all official boards, no need for installing the core/package. You will need the Create Plugin installed on your computer to use the Web Editor.
+The Web Editor is an online IDE that includes all official boards, no need for installing the Board Package. You will need the Create Plugin installed on your computer to use the Web Editor.
 
 Read more in the [Getting Started with the Web Editor](https://docs.arduino.cc/arduino-cloud/getting-started/getting-started-web-editor) guide.
 
@@ -226,7 +226,7 @@ Please note that the following pins are PWM capable but may interfere with other
 
 ## LED Matrix
 
-The LED Matrix on the UNO R4 WiFi is available to use in your program, to display still graphics, animations, or even play games on. The Renesas core includes the [Arduino_LED_Matrix](https://github.com/arduino/ArduinoCore-renesas/tree/main/libraries/Arduino_LED_Matrix) library for displaying frames on the matrix.
+The LED Matrix on the UNO R4 WiFi is available to use in your program, to display still graphics, animations, or even play games on. The UNO R4 Board Package includes the [Arduino_LED_Matrix](https://github.com/arduino/ArduinoCore-renesas/tree/main/libraries/Arduino_LED_Matrix) library for displaying frames on the matrix.
 
 To learn about the LED matrix in depth, check out the [LED Matrix Guide](/tutorials/uno-r4-wifi/led-matrix/).
 
@@ -636,7 +636,7 @@ If you wish you can change this and get direct access to the serial bus on the R
 
 The ESP32 onboard the UNO R4 WiFi is used to give the board Wi-Fi® capabilities. The Wi-Fi® module has a bitrate of up to 150 Mbps. The ESP32 module has a built in trace-antenna, meaning that you do not need an external one to use the connectivity features of the board. However, this trace antenna is shared with the Bluetooth® module, which means that you cannot use Bluetooth® and Wi-Fi® at the same time.
 
-To use the Wi-Fi® features of the UNO R4 WiFi, use the **WiFiS3** library that is built in to the UNO R4 Core.
+To use the Wi-Fi® features of the UNO R4 WiFi, use the **WiFiS3** library that is built in to the UNO R4 Board Package.
 
 To learn more about the Wi-Fi® capabilities of the UNO R4 WiFi, try out the [Network Examples](/tutorials/uno-r4-wifi/wifi-examples).
 
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/eeprom/eeprom.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/eeprom/eeprom.md
@@ -22,7 +22,7 @@ The goals of this tutorials are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino R4 WiFi](https://store.arduino.cc/uno-r4-wifi)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started)
 
 ## EEPROM
 
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/led-matrix/led-matrix.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/led-matrix/led-matrix.md
@@ -23,7 +23,7 @@ The matrix and its API are developed to be programmed in a few different ways, e
 ## Hardware & Software Needed
 
 - [Arduino UNO R4 WiFi](https://store.arduino.cc/uno-r4-wifi)
-- [UNO R4 Core](https://github.com/arduino/ArduinoCore-renesas) (latest version)
+- [UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started) (latest version)
 - [Arduino IDE](https://www.arduino.cc/en/software)
 
 ## Initializing Matrix
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/r4-wifi-getting-started/r4-wifi-getting-started.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/r4-wifi-getting-started/r4-wifi-getting-started.md
@@ -7,7 +7,7 @@ hardware:
 tags: [UNO R4 WiFi, Installation, IDE]
 ---
 
-To use the [Arduino UNO R4 WiFi](/hardware/uno-r4-wifi) board, you will need to install the UNO R4 WiFi board package, which is part of the [Arduino UNO R4 Core](https://github.com/arduino/ArduinoCore-renesas).
+To use the [Arduino UNO R4 WiFi](/hardware/uno-r4-wifi) board, you will need to install the UNO R4 WiFi board package, which is part of the [Arduino UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started).
 
 To install it, you will need the Arduino IDE, which you can download from the [Arduino Software page](https://www.arduino.cc/en/software). In this guide, we will use the latest version of the IDE 2.
 
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/rtc/rtc.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/rtc/rtc.md
@@ -23,11 +23,11 @@ The goals of this project are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino UNO R4 WiFi](https://store.arduino.cc/uno-r4-wifi)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started)
 
 ## Real-Time Clock (RTC)
 
-The RTC on the UNO R4 WiFi can be accessed using the [RTC](https://github.com/arduino/ArduinoCore-renesas/tree/main/libraries/RTC) library that is included in the [Renesas](https://github.com/arduino/ArduinoCore-renesas) core. This library allows you to set/get the time as well as using alarms to trigger interrupts. 
+The RTC on the UNO R4 WiFi can be accessed using the [RTC](https://github.com/arduino/ArduinoCore-renesas/tree/main/libraries/RTC) library that is included in the [UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started). This library allows you to set/get the time as well as using alarms to trigger interrupts. 
 
 ***The UNO R4 WiFi features a VRTC pin, that is used to keep the onboard RTC running, even when the boards power supply is is cut off. In order to use this, apply a voltage in the range of 1.6 - 3.6 V to the VRTC pin.***
 
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/usb-hid/usb-hid.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/usb-hid/usb-hid.md
@@ -24,15 +24,15 @@ The goals of this tutorials are:
 
 - Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software))
 - [Arduino UNO R4 WiFi](https://store.arduino.cc/uno-r4-wifi)
-- [Arduino Renesas Core](https://github.com/arduino/ArduinoCore-renesas)
+- [UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started)
 
 ## Human Interface Device (HID) 
 
 Human interface devices (HID) are devices designed for humans (keyboards, mice, game controllers etc.), that frequently sends data over USB to a computer. When you press a key on a keyboard, you send data to a computer, which reads it and in turn activates the corresponding key.
 
 The UNO R4 WiFi has built-in support for HID, a feature found on most modern day development boards, but not on previous UNO revisions. 
 
-To turn your board into an HID, you can use the **keyboard/mouse** API that is built in to the core. You can visit the documentation for this API in the language reference at:
+To turn your board into an HID, you can use the **keyboard/mouse** API that is built in to the Board Package. You can visit the documentation for this API in the language reference at:
 - [Keyboard](https://www.arduino.cc/reference/en/language/functions/usb/keyboard/)
 - [Mouse](https://www.arduino.cc/reference/en/language/functions/usb/mouse/)
 
diff --git a/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/wifi-examples/wifi-examples.md b/content/hardware/02.hero/boards/uno-r4-wifi/tutorials/wifi-examples/wifi-examples.md
@@ -1,6 +1,6 @@
 ---
 title: UNO R4 WiFi Network Examples
-description: Discover examples compatible with the WiFi library included in the UNO R4 core.
+description: Discover examples compatible with the WiFi library included in the UNO R4 Board Package.
 author: Jacob Hylén
 hardware:
   - hardware/02.hero/boards/uno-r4-wifi
@@ -9,7 +9,7 @@ tags: [Wi-Fi, Web Server, AP Mode, SSL, UDP]
 
 The [Arduino UNO R4 WiFi](/hardware/uno-r4-wifi) has a built in ESP32-S3 module that enables you to connect to Wi-Fi® networks, and perform network operations. Protocols including HTTPS, MQTT, UDP are tested and supported, and in this article, you will find a number of examples that will get you started.
 
-Wi-Fi® support is enabled via the built-in `WiFiS3` library that is shipped with the [Arduino UNO R4 Core](https://github.com/arduino/ArduinoCore-renesas). Installing the core automatically installs the `WiFiS3` library.
+Wi-Fi® support is enabled via the built-in `WiFiS3` library that is shipped with the [Arduino UNO R4 Board Package](/tutorials/uno-r4-wifi/r4-wifi-getting-started). Installing the Board Package automatically installs the `WiFiS3` library.
 
 ***The easiest way to connect your board to the Internet is via the [Arduino IoT Cloud](https://create.arduino.cc/iot/) platform. Here you can configure, program, monitor and synchronize your devices without having to write any networking code.*** 
 
diff --git a/content/hardware/02.hero/boards/uno-wifi-rev2/tutorials/uno-wifi-rev-2/uno-wifi-r2-hosting-a-webserver/uno-wifi-r2-hosting-a-webserver.md b/content/hardware/02.hero/boards/uno-wifi-rev2/tutorials/uno-wifi-rev-2/uno-wifi-r2-hosting-a-webserver/uno-wifi-r2-hosting-a-webserver.md
@@ -233,7 +233,7 @@ When interacting with the links, you should see the LED, connected to pin 2, tur
 
 If the code is not working, there are some common issues we might need to troubleshoot:
 - We have not updated the latest firmware for the board.
-- We have not installed the core required for the board.
+- We have not installed the Board Package required for the board.
 - We have not installed the **WiFiNINA** library.
 - We have entered the SSID and PASS incorrectly: remember, it is case sensitive.
 - We have not selected the right port to upload: depending on what computer we use, sometimes the board is duplicated. By simply restarting the editor, this issue can be solved.
diff --git a/content/hardware/02.hero/boards/uno-wifi-rev2/tutorials/uno-wifi-rev-2/uno-wifi-r2-web-server-ap-mode/uno-wifi-r2-web-server-ap-mode.md b/content/hardware/02.hero/boards/uno-wifi-rev2/tutorials/uno-wifi-rev-2/uno-wifi-r2-web-server-ap-mode/uno-wifi-r2-web-server-ap-mode.md
@@ -256,7 +256,7 @@ When interacting with the links, you should see the LED, connected to pin 2, tur
 
 If the code is not working, there are some common issues we might need to troubleshoot:
 - We have not updated the latest firmware for the board.
-- We have not installed the core required for the board.
+- We have not installed the Board Package required for the board.
 - We have not installed the WiFiNINA library.
 - We have not entered the SSID and PASS: remember, it is case sensitive.
 - We have not selected the right port to upload: depending on what computer we use, sometimes the board is duplicated. By simply restarting the editor, this issue can be solved.
diff --git a/content/hardware/02.hero/boards/zero/tutorials/arduino-zero-edbg/content.md b/content/hardware/02.hero/boards/zero/tutorials/arduino-zero-edbg/content.md
@@ -68,7 +68,7 @@ and, if all has gone as it should, in the log console you will see "OK".
 
 **13.** Go to "Memories"
 
-**14.** Select the file to write (typically Bootloader\_board\_Vxxx.hex) that you will find in your Arduino Software (IDE) installation, under the \_hardware/arduino/samd/...* path found in your '**Documents/Arduino/sketchbook**' folder. You need to install the SAMD core from board manager if you haven't done it yet. If your Arduino installation has been made ["portable"](https://arduino.cc/en/Guide/PortableIDE), the firmware will be in the **portable/packages/arduino** path. folder, as seen in our screen capture below.
+**14.** Select the file to write (typically Bootloader\_board\_Vxxx.hex) that you will find in your Arduino Software (IDE) installation, under the \_hardware/arduino/samd/...* path found in your '**Documents/Arduino/sketchbook**' folder. You need to install the SAMD Board Package from board manager if you haven't done it yet. If your Arduino installation has been made ["portable"](https://arduino.cc/en/Guide/PortableIDE), the firmware will be in the **portable/packages/arduino** path. folder, as seen in our screen capture below.
 
 **15.** Click "Program" and again, in the log console you will see "OK".
 
diff --git a/content/hardware/02.hero/boards/zero/tutorials/zero-bootloader-update/zero-bootloader-update.md b/content/hardware/02.hero/boards/zero/tutorials/zero-bootloader-update/zero-bootloader-update.md
