Temorary disabled remote upload for Tian

not working, disabling until we found the issue.

Author: cmaglie

CHANGELOG

@@ -1,3 +1,7 @@
+SAMD CORE 1.6.11 2016.12.23
+
+* Temporarily disabled support for Arduino Tian until an upload issue is fixed
+
 SAMD CORE 1.6.10 2016.12.23
 
 * Added .org boards

boards.txt

@@ -293,49 +293,3 @@ mzero_bl.build.emu.mcu=atmega2560
 mzero_bl.bootloader.tool=avrdude
 mzero_bl.bootloader.low_fuses=0xff
 
-######################################################
-#ARDUINO TIAN (WITH) BOOTLOADER
-
-tian.name=Arduino Tian
-tian.upload.via_ssh=true
-tian.vid.0=0x10C4
-tian.pid.0=0xEA70
-tian.descriptor.0=Enhanced Com Port
-
-tian.upload.tool=avrdude
-#tian.upload.protocol=stk500v2
-tian.upload.protocol=wiring
-tian.upload.maximum_size=262144
-tian.upload.use_1200bps_touch=true
-tian.upload.wait_for_upload_port=true
-tian.upload.native_usb=true
-tian.upload.speed=57600
-tian.build.mcu=cortex-m0plus
-tian.build.f_cpu=48000000L
-tian.build.usb_product="Arduino Tian"
-tian.build.board=SAMD_TIAN
-tian.build.core=arduino
-tian.build.extra_flags=-D__SAMD21G18A__ -mthumb {build.usb_flags}
-tian.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
-tian.build.openocdscript=openocd_scripts/arduino_zero.cfg
-tian.build.variant=arduino_mzero
-tian.build.variant_system_lib=
-tian.build.vid=0x2a03
-tian.build.pid=0x8052
-tian.build.preferred_out_format=hex
-tian.bootloader.size=0x4000
-tian.build.emu.mcu=atmega2560
-tian.bootloader.tool=openocd-withbootsize
-tian.bootloader.low_fuses=0xff
-tian.bootloader.file=sofia/Sofia_Tian_151118.hex
-tian.drivers=SiliconLabs-CP2105/Silicon Labs VCP Driver.pkg
-
-######################################################
-#ARDUINO TIAN CONSOLE PORT (NOT FOR UPLOAD)
-
-tian_cons.name=Arduino Tian (MIPS Console port)
-tian_cons.vid.0=0x10C4
-tian_cons.pid.0=0xEA70
-tian_cons.descriptor.0=Standard Com Port
-tian_cons.hide=true
-tian_cons.build.board=SAMD_TIAN

platform.txt

@@ -20,7 +20,7 @@
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
 
 name=Arduino SAMD (32-bits ARM Cortex-M0+) Boards
-version=1.6.10
+version=1.6.11
 
 # Compile variables
 # -----------------
@@ -126,7 +126,8 @@ tools.avrdude.upload.params.quiet=-q -q
 tools.avrdude.upload.params.noverify=-V
 tools.avrdude.upload.pattern="{cmd}" "-C{config.path}" {upload.verbose} -p{build.emu.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} "-Uflash:w:{build.path}/{build.project_name}.hex:i"
 
-tools.avrdude_remote.upload.pattern=/usr/bin/run-avrdude /tmp/sketch.hex
+#temporary disabled remote upload
+tools.avrdude_remote.upload.pattern=/usr/bin/XXX-run-avrdude /tmp/sketch.hex
 
 #
 # BOSSA