TEMP: opta variant rebuild

Author: pennam

cores/arduino/mbed/connectivity/drivers/emac/COMPONENT_WHD/interface/WhdSTAInterface.h

@@ -119,6 +119,11 @@ class WhdSTAInterface : public WiFiInterface, public EMACInterface {
         return 0;
     }
 
+    nsapi_error_t set_timeout(uint32_t timeout)
+    {
+        _timeout = timeout;
+    }
+
     /** Set blocking status of interface. 
      *  Nonblocking mode unsupported.
      *
@@ -257,6 +262,7 @@ class WhdSTAInterface : public WiFiInterface, public EMACInterface {
     nsapi_security_t _security;
     WHD_EMAC &_whd_emac;
     OlmInterface *_olm;
+    uint32_t _timeout;
     whd_interface_shared_info_t &_iface_shared;
 };
 

cores/arduino/mbed/connectivity/drivers/wifi/COMPONENT_WHD/wifi-host-driver/inc/whd_wifi_api.h

@@ -281,7 +281,7 @@ extern uint32_t whd_wifi_stop_scan(whd_interface_t ifp);
  *           Error code    if an error occurred
  */
 extern uint32_t whd_wifi_join(whd_interface_t ifp, const whd_ssid_t *ssid, whd_security_t auth_type,
-                              const uint8_t *security_key, uint8_t key_length);
+                              const uint8_t *security_key, uint8_t key_length, uint32_t timeout);
 
 /** Joins a specific Wi-Fi network
  *

cores/arduino/mbed/connectivity/netsocket/include/netsocket/TLSSocketWrapper.h

@@ -379,6 +379,10 @@ class TLSSocketWrapper : public Socket {
     Socket *_transport;
     int _timeout = -1;
 
+    // Event flags
+    static const int READ_FLAG     = 0x1u;
+    static const int WRITE_FLAG    = 0x2u;
+
 #ifdef MBEDTLS_X509_CRT_PARSE_C
     mbedtls_x509_crt *_cacert = nullptr;
     mbedtls_x509_crt *_clicert = nullptr;

cores/arduino/mbed/connectivity/netsocket/include/netsocket/WiFiInterface.h

@@ -59,6 +59,13 @@ class WiFiInterface: public virtual NetworkInterface {
      */
     virtual nsapi_error_t set_channel(uint8_t channel) = 0;
 
+    /** Set the Wi-Fi network join timeout.
+     *
+     *  @param timeout   joint timeout in milliseconds (Default: 7000).
+     *  @return          NSAPI_ERROR_OK on success, or error code on failure.
+     */
+    virtual nsapi_error_t set_timeout(uint32_t timeout) = 0;
+
     /** Get the current radio signal strength for active connection.
      *
      *  @return         Connection strength in dBm (negative value),

variants/OPTA/defines.txt

@@ -44,7 +44,7 @@
 -DFEATURE_BLE=1
 -D__FPU_PRESENT=1
 -D__MBED__=1
--DMBED_BUILD_TIMESTAMP=1720438877.8913524
+-DMBED_BUILD_TIMESTAMP=1730106855.6814
 -D__MBED_CMSIS_RTOS_CM
 -DMBED_TICKLESS
 -DMBEDTLS_FS_IO
@@ -80,7 +80,7 @@
 -DUSE_HAL_DRIVER
 -DVIRTIO_DRIVER_ONLY
 -DMBED_NO_GLOBAL_USING_DIRECTIVE=1
--DCORE_MAJOR=4
--DCORE_MINOR=1
--DCORE_PATCH=5
+-DCORE_MAJOR=
+-DCORE_MINOR=
+-DCORE_PATCH=
 -DUSE_ARDUINO_PINOUT

variants/OPTA/libs/libmbed.a

@@ -94,12 +94,7 @@ SECTIONS
         __bss_end__ = .;
         _ebss = .;
     } > RAM
-    .openamp_section (NOLOAD) : {
- 				. = ABSOLUTE(0x38000000);
- 				*(.resource_table)
- 				} >RAM_D3  AT > FLASH
- 				.pdm_section (NOLOAD) : {
- 				. = ABSOLUTE(0x3800FC00);
+    .pdm_section 0x3800FC00 (NOLOAD):  {
  				*(.pdm_buffer)
  				} > RAM_D3
  					_dtcm_lma = __etext + SIZEOF(.data);