Add config options to due Serial1, 2, and 3

Adds ability to set length, parity and stop bit configuration to
hardware serial ports using USART module (Serial1, Serial2, and Serial
3) on Due to allow compatibility with avr devices.

Author: bluesign2k

hardware/arduino/sam/cores/arduino/USARTClass.cpp

@@ -35,6 +35,11 @@ USARTClass::USARTClass( Usart* pUsart, IRQn_Type dwIrq, uint32_t dwId, RingBuffe
 // Public Methods //////////////////////////////////////////////////////////////
 
 void USARTClass::begin( const uint32_t dwBaudRate )
+{
+	begin( dwBaudRate, SERIAL_8N1 );
+}
+
+void USARTClass::begin( const uint32_t dwBaudRate, const uint32_t config )
 {
   // Configure PMC
   pmc_enable_periph_clk( _dwId ) ;
@@ -46,8 +51,8 @@ void USARTClass::begin( const uint32_t dwBaudRate )
   _pUsart->US_CR = US_CR_RSTRX | US_CR_RSTTX | US_CR_RXDIS | US_CR_TXDIS ;
 
   // Configure mode
-  _pUsart->US_MR = US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_8_BIT | US_MR_PAR_NO |
-                   US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL;
+  _pUsart->US_MR = config;
+
 
   // Configure baudrate, asynchronous no oversampling
   _pUsart->US_BRGR = (SystemCoreClock / dwBaudRate) / 16 ;

hardware/arduino/sam/cores/arduino/USARTClass.h

@@ -25,6 +25,37 @@
 // Includes Atmel CMSIS
 #include <chip.h>
 
+// Define config for Serial.begin(baud, config);
+#define SERIAL_5N1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_5_BIT | US_MR_PAR_NO | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_6N1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_6_BIT | US_MR_PAR_NO | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_7N1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_7_BIT | US_MR_PAR_NO | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_8N1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_8_BIT | US_MR_PAR_NO | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+
+#define SERIAL_5N2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_5_BIT | US_MR_PAR_NO | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_6N2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_6_BIT | US_MR_PAR_NO | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_7N2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_7_BIT | US_MR_PAR_NO | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_8N2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_8_BIT | US_MR_PAR_NO | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+
+#define SERIAL_5E1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_5_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_6E1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_6_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_7E1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_7_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_8E1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_8_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+
+#define SERIAL_5E2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_5_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_6E2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_6_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_7E2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_7_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_8E2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_8_BIT | US_MR_PAR_EVEN | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+
+#define SERIAL_5O1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_5_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_6O1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_6_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_7O1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_7_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_8O1 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_8_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_1_BIT | US_MR_CHMODE_NORMAL)
+
+#define SERIAL_5O2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_5_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_6O2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_6_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_7O2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_7_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+#define SERIAL_8O2 (US_MR_USART_MODE_NORMAL | US_MR_USCLKS_MCK | US_MR_CHRL_8_BIT | US_MR_PAR_ODD | US_MR_NBSTOP_2_BIT | US_MR_CHMODE_NORMAL)
+
 class USARTClass : public HardwareSerial
 {
   protected:
@@ -39,6 +70,7 @@ class USARTClass : public HardwareSerial
     USARTClass( Usart* pUsart, IRQn_Type dwIrq, uint32_t dwId, RingBuffer* pRx_buffer ) ;
 
     void begin( const uint32_t dwBaudRate ) ;
+	void begin( const uint32_t dwBaudRate , const uint32_t config ) ;
     void end( void ) ;
     int available( void ) ;
     int peek( void ) ;