Merge pull request #3524 from facchinm/pins_DUE

Due: solve issues with nonstandard pin operations

Author: facchinm

hardware/arduino/sam/cores/arduino/Arduino.h

@@ -155,6 +155,16 @@ typedef enum _ETCChannel
 #define PIN_ATTR_PWM           (1UL<<3)
 #define PIN_ATTR_TIMER         (1UL<<4)
 
+#define PIN_STATUS_DIGITAL_INPUT_PULLUP  (0x01)
+#define PIN_STATUS_DIGITAL_INPUT         (0x02)
+#define PIN_STATUS_DIGITAL_OUTPUT        (0x03)
+#define PIN_STATUS_ANALOG                (0x04)
+#define PIN_STATUS_PWM                   (0x05)
+#define PIN_STATUS_TIMER                 (0x06)
+#define PIN_STATUS_SERIAL                (0x07)
+#define PIN_STATUS_DW_LOW                (0x10)
+#define PIN_STATUS_DW_HIGH               (0x11)
+
 /* Types used for the tables below */
 typedef struct _PinDescription
 {
@@ -170,6 +180,8 @@ typedef struct _PinDescription
   ETCChannel ulTCChannel ;
 } PinDescription ;
 
+extern uint8_t g_pinStatus[];
+
 /* Pins table to be instanciated into variant.cpp */
 extern const PinDescription g_APinDescription[] ;
 

hardware/arduino/sam/cores/arduino/wiring_analog.c

@@ -148,11 +148,12 @@ uint32_t analogRead(uint32_t ulPin)
 		case ADC11 :
 
 			// Enable the corresponding channel
-			if (ulChannel != latestSelectedChannel) {
+			if (adc_get_channel_status(ADC, ulChannel) != 1) {
 				adc_enable_channel( ADC, ulChannel );
-				if ( latestSelectedChannel != (uint32_t)-1 )
+				if ( latestSelectedChannel != (uint32_t)-1 && ulChannel != latestSelectedChannel)
 					adc_disable_channel( ADC, latestSelectedChannel );
 				latestSelectedChannel = ulChannel;
+				g_pinStatus[ulPin] = (g_pinStatus[ulPin] & 0xF0) | PIN_STATUS_ANALOG;
 			}
 
 			// Start the ADC
@@ -189,13 +190,9 @@ static void TC_SetCMR_ChannelB(Tc *tc, uint32_t chan, uint32_t v)
 }
 
 static uint8_t PWMEnabled = 0;
-static uint8_t pinEnabled[PINS_COUNT];
 static uint8_t TCChanEnabled[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
 
 void analogOutputInit(void) {
-	uint8_t i;
-	for (i=0; i<PINS_COUNT; i++)
-		pinEnabled[i] = 0;
 }
 
 // Right now, PWM output only works on the pins with
@@ -263,7 +260,7 @@ void analogWrite(uint32_t ulPin, uint32_t ulValue) {
 		}
 
 		uint32_t chan = g_APinDescription[ulPin].ulPWMChannel;
-		if (!pinEnabled[ulPin]) {
+		if ((g_pinStatus[ulPin] & 0xF) != PIN_STATUS_PWM) {
 			// Setup PWM for this pin
 			PIO_Configure(g_APinDescription[ulPin].pPort,
 					g_APinDescription[ulPin].ulPinType,
@@ -273,7 +270,7 @@ void analogWrite(uint32_t ulPin, uint32_t ulValue) {
 			PWMC_SetPeriod(PWM_INTERFACE, chan, PWM_MAX_DUTY_CYCLE);
 			PWMC_SetDutyCycle(PWM_INTERFACE, chan, ulValue);
 			PWMC_EnableChannel(PWM_INTERFACE, chan);
-			pinEnabled[ulPin] = 1;
+			g_pinStatus[ulPin] = (g_pinStatus[ulPin] & 0xF0) | PIN_STATUS_PWM;
 		}
 
 		PWMC_SetDutyCycle(PWM_INTERFACE, chan, ulValue);
@@ -328,12 +325,12 @@ void analogWrite(uint32_t ulPin, uint32_t ulValue) {
 				TC_SetCMR_ChannelB(chTC, chNo, TC_CMR_BCPB_CLEAR | TC_CMR_BCPC_SET);
 			}
 		}
-		if (!pinEnabled[ulPin]) {
+		if ((g_pinStatus[ulPin] & 0xF) != PIN_STATUS_PWM) {
 			PIO_Configure(g_APinDescription[ulPin].pPort,
 					g_APinDescription[ulPin].ulPinType,
 					g_APinDescription[ulPin].ulPin,
 					g_APinDescription[ulPin].ulPinConfiguration);
-			pinEnabled[ulPin] = 1;
+			g_pinStatus[ulPin] = (g_pinStatus[ulPin] & 0xF0) | PIN_STATUS_PWM;
 		}
 		if (!TCChanEnabled[interfaceID]) {
 			TC_Start(chTC, chNo);

hardware/arduino/sam/cores/arduino/wiring_digital.c

@@ -29,6 +29,20 @@ extern void pinMode( uint32_t ulPin, uint32_t ulMode )
         return ;
     }
 
+  if ((g_pinStatus[ulPin] & 0xF) == PIN_STATUS_ANALOG)
+    {
+      adc_disable_channel( ADC, g_APinDescription[ulPin].ulADCChannelNumber);
+    }
+
+  if ((g_pinStatus[ulPin] & 0xF) < PIN_STATUS_DIGITAL_OUTPUT && g_pinStatus[ulPin] != 0)
+    {
+      // return if already configured in the right way
+      if (((g_pinStatus[ulPin] & 0xF) == PIN_STATUS_DIGITAL_INPUT && ulMode == INPUT) ||
+          ((g_pinStatus[ulPin] & 0xF) == PIN_STATUS_DIGITAL_INPUT_PULLUP && ulMode == INPUT_PULLUP) ||
+          ((g_pinStatus[ulPin] & 0xF) == PIN_STATUS_DIGITAL_OUTPUT && ulMode == OUTPUT))
+      return;
+    }
+
 	switch ( ulMode )
     {
         case INPUT:
@@ -39,6 +53,7 @@ extern void pinMode( uint32_t ulPin, uint32_t ulMode )
             	PIO_INPUT,
             	g_APinDescription[ulPin].ulPin,
             	0 ) ;
+            g_pinStatus[ulPin] = (g_pinStatus[ulPin] & 0xF0) | PIN_STATUS_DIGITAL_INPUT;
         break ;
 
         case INPUT_PULLUP:
@@ -49,15 +64,18 @@ extern void pinMode( uint32_t ulPin, uint32_t ulMode )
             	PIO_INPUT,
             	g_APinDescription[ulPin].ulPin,
             	PIO_PULLUP ) ;
+            g_pinStatus[ulPin] = (g_pinStatus[ulPin] & 0xF0) | PIN_STATUS_DIGITAL_INPUT_PULLUP;
         break ;
 
         case OUTPUT:
             PIO_Configure(
             	g_APinDescription[ulPin].pPort,
-            	PIO_OUTPUT_1,
+              (g_pinStatus[ulPin] & 0xF0) >> 4 ? PIO_OUTPUT_1 : PIO_OUTPUT_0,
             	g_APinDescription[ulPin].ulPin,
             	g_APinDescription[ulPin].ulPinConfiguration ) ;
 
+            g_pinStatus[ulPin] = (g_pinStatus[ulPin] & 0xF0) | PIN_STATUS_DIGITAL_OUTPUT;
+
             /* if all pins are output, disable PIO Controller clocking, reduce power consumption */
             if ( g_APinDescription[ulPin].pPort->PIO_OSR == 0xffffffff )
             {
@@ -78,6 +96,12 @@ extern void digitalWrite( uint32_t ulPin, uint32_t ulVal )
     return ;
   }
 
+  if ((g_pinStatus[ulPin] & 0xF) == PIN_STATUS_PWM) {
+    pinMode(ulPin, OUTPUT);
+  }
+
+  g_pinStatus[ulPin] = (g_pinStatus[ulPin] & 0x0F) | (ulVal << 4) ;
+
   if ( PIO_GetOutputDataStatus( g_APinDescription[ulPin].pPort, g_APinDescription[ulPin].ulPin ) == 0 )
   {
     PIO_PullUp( g_APinDescription[ulPin].pPort, g_APinDescription[ulPin].ulPin, ulVal ) ;
@@ -90,6 +114,14 @@ extern void digitalWrite( uint32_t ulPin, uint32_t ulVal )
 
 extern int digitalRead( uint32_t ulPin )
 {
+  if ((g_pinStatus[ulPin] & 0xF) == PIN_STATUS_DIGITAL_OUTPUT) {
+    return (g_pinStatus[ulPin] & 0xF0) >> 4;
+  }
+
+  if ((g_pinStatus[ulPin] & 0xF) == PIN_STATUS_ANALOG) {
+    pinMode(ulPin, INPUT);
+  }
+
 	if ( g_APinDescription[ulPin].ulPinType == PIO_NOT_A_PIN )
     {
         return LOW ;

hardware/arduino/sam/system/libsam/source/adc.c

@@ -192,18 +192,39 @@ void adc_set_resolution(Adc *p_adc,const enum adc_resolution_t resolution)
 void adc_configure_trigger(Adc *p_adc, const enum adc_trigger_t trigger,
 		uint8_t uc_freerun)
 {
-	p_adc->ADC_MR |= trigger | ((uc_freerun << 7) & ADC_MR_FREERUN);
+	//Warning ADC_MR_TRGSEL_Msk does not include ADC_MR_TRGEN.
+	p_adc->ADC_MR &= ~(ADC_MR_TRGEN | ADC_MR_TRGSEL_Msk | ADC_MR_FREERUN); //Clear all bits related to triggers and freerun
+	
+	//Configure FreeRun
+	if(uc_freerun & ADC_MR_FREERUN == ADC_MR_FREERUN_ON) {                 //FreeRun is enabled
+		p_adc->ADC_MR |= ADC_MR_FREERUN_ON;
+		
+		//Free Run Mode: Never wait for any trigger
+		//No need to continue and enable hardware triggers
+		return;
+	}
+	
+	//Configure hardware triggers
+	if(trigger & ADC_MR_TRGEN == ADC_MR_TRGEN_EN) {                       //Hardware trigger is enabled
+		p_adc->ADC_MR |= (trigger & ADC_MR_TRGSEL_Msk) | ADC_MR_TRGEN_EN; //Set trigger selection bits and enable hardware trigger
+	}
 }
 #elif SAM3U_SERIES
 /**
- * \brief Configure conversion trigger and free run mode.
+ * \brief Configure conversion trigger.
  *
  * \param p_adc Pointer to an ADC instance.
  * \param trigger Conversion trigger.
  */
 void adc_configure_trigger(Adc *p_adc, const enum adc_trigger_t trigger)
 {
-	p_adc->ADC_MR |= trigger;
+	//Warning ADC_MR_TRGSEL_Msk does not include ADC_MR_TRGEN.
+	p_adc->ADC_MR &= ~(ADC_MR_TRGEN | ADC_MR_TRGSEL_Msk);                  //Clear all bits related to triggers
+	
+	//Configure hardware triggers
+	if(trigger & ADC_MR_TRGEN == ADC_MR_TRGEN_EN) {                        //Hardware trigger is enabled
+		p_adc->ADC_MR |= (trigger & ADC_MR_TRGSEL_Msk) | ADC_MR_TRGEN_EN;  //Set trigger selection bits and enable hardware trigger
+	}
 }
 #endif
 

hardware/arduino/sam/variants/arduino_due_x/variant.cpp

@@ -291,6 +291,9 @@ extern const PinDescription g_APinDescription[]=
   { NULL, 0, 0, PIO_NOT_A_PIN, PIO_DEFAULT, 0, NO_ADC, NO_ADC, NOT_ON_PWM, NOT_ON_TIMER }
 } ;
 
+
+uint8_t g_pinStatus[PINS_COUNT] = {0};
+
 #ifdef __cplusplus
 }
 #endif