Merge tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add a new cpufreq driver for Loongson-3, add support for new
  features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
  mode for Emerald Rapids, highest performance change interrupt),
  amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
  drivers, simplify the cpufreq driver interface, simplify the teo
  cpuidle governor, adjust the pm-graph utility for a new version of
  Python, address issues and clean up code.

  Specifics:

   - Add Loongson-3 CPUFreq driver support (Huacai Chen)

   - Add support for the Arrow Lake and Lunar Lake platforms and the
     out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
     cpufreq driver, make it support the highest performance change
     interrupt and clean it up (Srinivas Pandruvada)

   - Switch cpufreq to new Intel CPU model defines (Tony Luck)

   - Simplify the cpufreq driver interface by switching the .exit()
     driver callback to the void return data type (Lizhe, Viresh Kumar)

   - Make cpufreq_boost_enabled() return bool (Dhruva Gole)

   - Add fast CPPC support to the amd-pstate cpufreq driver, address
     multiple assorted issues in it and clean it up (Perry Yuan, Mario
     Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)

   - Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
     Walklin)

   - Fix memory leaks and of_node_put() usage in the sun50i and
     qcom-nvmem cpufreq drivers (Javier Carrasco)

   - Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
     Raphael Gallais-Pou)

   - Fix deferred probe handling in the TI cpufreq driver and wrong
     return values of ti_opp_supply_probe(), and add OPP tables for the
     AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)

   - Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
     driver (Jagadeesh Kona)

   - Use dev_err_probe() in every error path in probe in the Mediatek
     cpufreq driver (Nícolas Prado)

   - Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
     driver (Yang Li)

   - Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)

   - Improve the teo cpuidle governor and clean up leftover comments
     from the menu cpuidle governor (Christian Loehle)

   - Clean up a comment typo in the teo cpuidle governor (Atul Kumar
     Pant)

   - Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
     Johnson)

   - Switch the intel_idle driver to new Intel CPU model defines (Tony
     Luck)

   - Switch the Intel RAPL driver new Intel CPU model defines (Tony
     Luck)

   - Simplify if condition in the idle_inject driver (Thorsten Blum)

   - Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)

   - Introduce an OF helper function to inform if required-opps is used
     and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)

   - Update pm-graph to v5.12 which includes fixes and major code revamp
     for python3.12 (Todd Brandt)

   - Address several assorted issues in the cpupower utility (Roman
     Storozhenko)"

* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
  cpufreq: sti: fix build warning
  cpufreq: mediatek: Use dev_err_probe in every error path in probe
  cpufreq: Add Loongson-3 CPUFreq driver support
  cpufreq: Make cpufreq_driver->exit() return void
  cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
  cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
  cpufreq: pcc: Remove empty exit() callback
  cpufreq: loongson2: Remove empty exit() callback
  cpufreq: nforce2: Remove empty exit() callback
  cpupower: fix lib default installation path
  cpufreq: docs: Add missing scaling_available_frequencies description
  cpuidle: teo: Don't count non-existent intercepts
  cpupower: Disable direct build of the 'bench' subproject
  cpuidle: teo: Remove recent intercepts metric
  Revert: "cpuidle: teo: Introduce util-awareness"
  cpufreq: make cpufreq_boost_enabled() return bool
  cpufreq: intel_pstate: Support highest performance change interrupt
  x86/cpufeatures: Add HWP highest perf change feature flag
  Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
  cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
  ...

Author: torvalds

Documentation/admin-guide/pm/amd-pstate.rst

@@ -281,6 +281,22 @@ integer values defined between 0 to 255 when EPP feature is enabled by platform
 firmware, if EPP feature is disabled, driver will ignore the written value
 This attribute is read-write.
 
+``boost``
+The `boost` sysfs attribute provides control over the CPU core
+performance boost, allowing users to manage the maximum frequency limitation
+of the CPU. This attribute can be used to enable or disable the boost feature
+on individual CPUs.
+
+When the boost feature is enabled, the CPU can dynamically increase its frequency
+beyond the base frequency, providing enhanced performance for demanding workloads.
+On the other hand, disabling the boost feature restricts the CPU to operate at the
+base frequency, which may be desirable in certain scenarios to prioritize power
+efficiency or manage temperature.
+
+To manipulate the `boost` attribute, users can write a value of `0` to disable the
+boost or `1` to enable it, for the respective CPU using the sysfs path
+`/sys/devices/system/cpu/cpuX/cpufreq/boost`, where `X` represents the CPU number.
+
 Other performance and frequency values can be read back from
 ``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`.
 
@@ -406,7 +422,7 @@ control its functionality at the system level.  They are located in the
 ``/sys/devices/system/cpu/amd_pstate/`` directory and affect all CPUs.
 
 ``status``
-	Operation mode of the driver: "active", "passive" or "disable".
+	Operation mode of the driver: "active", "passive", "guided" or "disable".
 
 	"active"
 		The driver is functional and in the ``active mode``

Documentation/admin-guide/pm/cpufreq.rst

@@ -267,6 +267,10 @@ are the following:
 ``related_cpus``
 	List of all (online and offline) CPUs belonging to this policy.
 
+``scaling_available_frequencies``
+	List of available frequencies of the CPUs belonging to this policy
+	(in kHz).
+
 ``scaling_available_governors``
 	List of ``CPUFreq`` scaling governors present in the kernel that can
 	be attached to this policy or (if the |intel_pstate| scaling driver is

MAINTAINERS

@@ -13040,6 +13040,7 @@ F:	Documentation/arch/loongarch/
 F:	Documentation/translations/zh_CN/arch/loongarch/
 F:	arch/loongarch/
 F:	drivers/*/*loongarch*
+F:	drivers/cpufreq/loongson3_cpufreq.c
 
 LOONGSON GPIO DRIVER
 M:	Yinbo Zhu <zhuyinbo@loongson.cn>

arch/x86/include/asm/cpufeatures.h

@@ -361,6 +361,7 @@
 #define X86_FEATURE_HWP_ACT_WINDOW	(14*32+ 9) /* "hwp_act_window" HWP Activity Window */
 #define X86_FEATURE_HWP_EPP		(14*32+10) /* "hwp_epp" HWP Energy Perf. Preference */
 #define X86_FEATURE_HWP_PKG_REQ		(14*32+11) /* "hwp_pkg_req" HWP Package Level Request */
+#define X86_FEATURE_HWP_HIGHEST_PERF_CHANGE (14*32+15) /* HWP Highest perf change */
 #define X86_FEATURE_HFI			(14*32+19) /* "hfi" Hardware Feedback Interface */
 
 /* AMD SVM Feature Identification, CPUID level 0x8000000a (EDX), word 15 */
@@ -471,6 +472,7 @@
 #define X86_FEATURE_BHI_CTRL		(21*32+ 2) /* BHI_DIS_S HW control available */
 #define X86_FEATURE_CLEAR_BHB_HW	(21*32+ 3) /* BHI_DIS_S HW control enabled */
 #define X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT (21*32+ 4) /* Clear branch history at vmexit using SW loop */
+#define X86_FEATURE_FAST_CPPC		(21*32 + 5) /* AMD Fast CPPC */
 
 /*
  * BUG word(s)

arch/x86/include/asm/msr-index.h

@@ -783,6 +783,8 @@
 #define MSR_K7_HWCR_IRPERF_EN		BIT_ULL(MSR_K7_HWCR_IRPERF_EN_BIT)
 #define MSR_K7_FID_VID_CTL		0xc0010041
 #define MSR_K7_FID_VID_STATUS		0xc0010042
+#define MSR_K7_HWCR_CPB_DIS_BIT		25
+#define MSR_K7_HWCR_CPB_DIS		BIT_ULL(MSR_K7_HWCR_CPB_DIS_BIT)
 
 /* K6 MSRs */
 #define MSR_K6_WHCR			0xc0000082

arch/x86/kernel/cpu/scattered.c

@@ -45,6 +45,7 @@ static const struct cpuid_bit cpuid_bits[] = {
 	{ X86_FEATURE_HW_PSTATE,	CPUID_EDX,  7, 0x80000007, 0 },
 	{ X86_FEATURE_CPB,		CPUID_EDX,  9, 0x80000007, 0 },
 	{ X86_FEATURE_PROC_FEEDBACK,    CPUID_EDX, 11, 0x80000007, 0 },
+	{ X86_FEATURE_FAST_CPPC, 	CPUID_EDX, 15, 0x80000007, 0 },
 	{ X86_FEATURE_MBA,		CPUID_EBX,  6, 0x80000008, 0 },
 	{ X86_FEATURE_SMBA,		CPUID_EBX,  2, 0x80000020, 0 },
 	{ X86_FEATURE_BMEC,		CPUID_EBX,  3, 0x80000020, 0 },

drivers/cpufreq/Kconfig

@@ -262,6 +262,18 @@ config LOONGSON2_CPUFREQ
 	  If in doubt, say N.
 endif
 
+if LOONGARCH
+config LOONGSON3_CPUFREQ
+	tristate "Loongson3 CPUFreq Driver"
+	help
+	  This option adds a CPUFreq driver for Loongson processors which
+	  support software configurable cpu frequency.
+
+	  Loongson-3 family processors support this feature.
+
+	  If in doubt, say N.
+endif
+
 if SPARC64
 config SPARC_US3_CPUFREQ
 	tristate "UltraSPARC-III CPU Frequency driver"

drivers/cpufreq/Kconfig.x86

@@ -71,6 +71,7 @@ config X86_AMD_PSTATE_DEFAULT_MODE
 config X86_AMD_PSTATE_UT
 	tristate "selftest for AMD Processor P-State driver"
 	depends on X86 && ACPI_PROCESSOR
+	depends on X86_AMD_PSTATE
 	default n
 	help
 	  This kernel module is used for testing. It's safe to say M here.

drivers/cpufreq/Makefile

@@ -103,6 +103,7 @@ obj-$(CONFIG_POWERNV_CPUFREQ)		+= powernv-cpufreq.o
 # Other platform drivers
 obj-$(CONFIG_BMIPS_CPUFREQ)		+= bmips-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
+obj-$(CONFIG_LOONGSON3_CPUFREQ)		+= loongson3_cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
 obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
 obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o

drivers/cpufreq/acpi-cpufreq.c

@@ -50,8 +50,6 @@ enum {
 #define AMD_MSR_RANGE		(0x7)
 #define HYGON_MSR_RANGE		(0x7)
 
-#define MSR_K7_HWCR_CPB_DIS	(1ULL << 25)
-
 struct acpi_cpufreq_data {
 	unsigned int resume;
 	unsigned int cpu_feature;
@@ -908,7 +906,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	return result;
 }
 
-static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+static void acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
 	struct acpi_cpufreq_data *data = policy->driver_data;
 
@@ -921,8 +919,6 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 	free_cpumask_var(data->freqdomain_cpus);
 	kfree(policy->freq_table);
 	kfree(data);
-
-	return 0;
 }
 
 static int acpi_cpufreq_resume(struct cpufreq_policy *policy)