source/common.c: add initial PocketBeagle values

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Author: RobertCNelson

source/common.c

@@ -180,7 +180,80 @@ pins_t table[] = {
 
     { "PAUSE", "P8_9",  69, 1, -1},
     { "MODE",  "P8_10", 68, 1, -1},
-
+  
+  // These are for the PocketBeagle
+  { "VIN_AC", "P1_1", 0, -1, -1},
+  { "GPIO2_23", "P1_2", 87, -1, -1},
+  { "USB1_VBUS_OUT", "P1_3", 0, -1, -1},
+  { "GPIO2_25", "P1_4", 89, -1, -1},
+  { "USB1_VBUS_IN", "P1_5", 0, -1, -1},
+  { "SPI0_CS0", "P1_6", 5, -1, -1},
+  { "VIN-USB", "P1_7", 0, -1, -1},
+  { "SPI0_SCLK", "P1_8", 2, 3, -1},
+  { "USB1-DN", "P1_9", 0, -1, -1},
+  { "SPI0_D0", "P1_10", 3, 3, -1},
+  { "USB1-DP", "P1_11", 0, -1, -1},
+  { "SPI0_D1", "P1_12", 4, -1, -1},
+  { "USB1-ID", "P1_13", 0, -1, -1},
+  { "VOUT-3.3V", "P1_14", 0, -1, -1},
+  { "GND", "P1_15", 0, -1, -1},
+  { "GND", "P1_16", 0, -1, -1},
+  { "VREFN", "P1_17", 0, -1, -1},
+  { "VREFP", "P1_18", 0, -1, -1},
+  { "AIN0", "P1_19", 0, -1, 0},
+  { "GPIO0_20", "P1_20", 20, -1, -1},
+  { "AIN1", "P1_21", 0, -1, 1},
+  { "GND", "P1_22", 0, -1, -1},
+  { "AIN2", "P1_23", 0, -1, 2},
+  { "VOUT-5V", "P1_24", 0, -1, -1},
+  { "AIN3", "P1_25", 0, -1, 3},
+  { "I2C2_SDA", "P1_26", 12, -1, -1},
+  { "AIN4", "P1_27", 0, -1, 4},
+  { "I2C2_SCL", "P1_28", 13, -1, -1},
+  { "GPIO3_21", "P1_29", 117, -1, -1},
+  { "UART0_TXD", "P1_30", 43, -1, -1},
+  { "GPIO3_18", "P1_31", 114, -1, -1},
+  { "UART0_RXD", "P1_32", 42, -1, -1},
+  { "GPIO3_15", "P1_33", 111, 1, -1},
+  { "GPIO0_26", "P1_34", 26, -1, -1},
+  { "GPIO2_24", "P1_35", 88, -1, -1},
+  { "EHRPWM0A", "P1_36", 110, 1, -1},
+  { "EHRPWM1A", "P2_1", 50, 6, -1},
+  { "GPIO1_27", "P2_2", 59, -1, -1},
+  { "GPIO0_23", "P2_3", 23, 4, -1},
+  { "GPIO1_26", "P2_4", 58, -1, -1},
+  { "UART4_RXD", "P2_5", 30, -1, -1},
+  { "GPIO1_25", "P2_6", 57, -1, -1},
+  { "UART4_TXD", "P2_7", 31, -1, -1},
+  { "GPIO1_28", "P2_8", 60, -1, -1},
+  { "I2C1_SCL", "P2_9", 15, -1, -1},
+  { "GPIO1_20", "P2_10", 52, -1, -1},
+  { "I2C1_SDA", "P2_11", 14, -1, -1},
+  { "POWER_BUTTON", "P2_12", 0, -1, -1},
+  { "VOUT-5V", "P2_13", 0, -1, -1},
+  { "BAT-VIN", "P2_14", 0, -1, -1},
+  { "GND", "P2_15", 0, -1, -1},
+  { "BAT-TEMP", "P2_16", 0, -1, -1},
+  { "GPIO2_1", "P2_17", 65, -1, -1},
+  { "GPIO1_15", "P2_18", 47, -1, -1},
+  { "GPIO0_27", "P2_19", 27, -1, -1},
+  { "GPIO2_0", "P2_20", 64, -1, -1},
+  { "GND", "P2_21", 0, -1, -1},
+  { "GPIO1_14", "P2_22", 46, -1, -1},
+  { "VOUT-3.3V", "P2_23", 0, -1, -1},
+  { "GPIO1_16", "P2_24", 48, -1, -1},
+  { "SPI1_CS0", "P2_25", 41, -1, -1},
+  { "RESET#", "P2_26", 0, -1, -1},
+  { "SPI1_D0", "P2_27", 40, -1, -1},
+  { "GPIO3_20", "P2_28", 116, -1, -1},
+  { "SPI1_SCLK", "P2_29", 7, -1, -1},
+  { "GPIO3_17", "P2_30", 113, -1, -1},
+  { "SPI1_CS1", "P2_31", 19, -1, -1},
+  { "GPIO3_16", "P2_32", 112, -1, -1},
+  { "GPIO1_13", "P2_33", 45, -1, -1},
+  { "GPIO3_19", "P2_34", 115, -1, -1},
+  { "GPIO2_22", "P2_35", 86, -1, -1},
+  { "AIN7", "P2_36", 0, -1, 7},
 
   { NULL, NULL, 0, 0, 0 }
 };
@@ -220,6 +293,12 @@ pwm_t pwm_table[] = {
   { "ehrpwm0", 1, 1, 1, "ehrpwm.0:1", "EHRPWM0B", "48300000", "48300200", "P9_29"},
   { "ehrpwm0", 0, 0, 1, "ehrpwm.0:0", "EHRPWM0A", "48300000", "48300200", "P9_31"},
   {   "ecap0", 2, 0, 0, "ecap.0",     "ECAPPWM0", "48300000", "48300100", "P9_42"},
+  { "ehrpwm0", 0, 0, 1, "ehrpwm.0:0", "EHRPWM0A", "48300000", "48300200", "P1_8"},
+  { "ehrpwm0", 0, 0, 1, "ehrpwm.0:0", "EHRPWM0A", "48300000", "48300200", "P1_36"},
+  { "ehrpwm0", 1, 1, 1, "ehrpwm.0:1", "EHRPWM0B", "48300000", "48300200", "P1_10"},
+  { "ehrpwm0", 1, 1, 1, "ehrpwm.0:1", "EHRPWM0B", "48300000", "48300200", "P1_13"},
+  { "ehrpwm1", 3, 0, 6, "ehrpwm.1:0", "EHRPWM1A", "48302000", "48302200", "P2_1"},
+  { "ehrpwm2", 6, 1, 3, "ehrpwm.2:1", "EHRPWM2B", "48304000", "48304200", "P2_3"},
   { NULL, 0, 0, 0, NULL, NULL, NULL, NULL, NULL }
 };