Merge tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

torvalds · torvalds · commit ff202c5028a1 · 2025-02-21T13:16:01.000-08:00
Pull SoC fixes from Arnd Bergmann:
 "Two people stepped up as platform co-maintainers: Andrew Jeffery for
  ASpeed and Janne Grunau for Apple.

  The rockchip platform gets 9 small fixes for devicetree files,
  addressing both compile-time warnings and board specific bugs.

  One bugfix for the optee firmware driver addresses a reboot-time hang.

  Two drivers need improved Kconfig dependencies to allow wider compile-
  testing while hiding the drivers on platforms that can't use them.

  ARM SCMI and loongson-guts drivers get minor bugfixes"

* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: loongson: loongson2_guts: Add check for devm_kstrdup()
  tee: optee: Fix supplicant wait loop
  platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
  firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
  MAINTAINERS: arm: apple: Add Janne as maintainer
  MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
  firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
  arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
  arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
  dt-bindings: rockchip: pmu: Ensure all properties are defined
  arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
  arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
  arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
  arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
  arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
  arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
  arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -53,11 +53,17 @@ properties:
   reg:
     maxItems: 1
 
+  power-controller:
+    type: object
+
+  reboot-mode:
+    type: object
+
 required:
   - compatible
   - reg
 
-additionalProperties: true
+additionalProperties: false
 
 examples:
   - |
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -2210,6 +2210,7 @@ F:	sound/soc/codecs/ssm3515.c
 
 ARM/APPLE MACHINE SUPPORT
 M:	Sven Peter <sven@svenpeter.dev>
+M:	Janne Grunau <j@jannau.net>
 R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
 L:	asahi@lists.linux.dev
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2284,7 +2285,7 @@ F:	drivers/irqchip/irq-aspeed-i2c-ic.c
 
 ARM/ASPEED MACHINE SUPPORT
 M:	Joel Stanley <joel@jms.id.au>
-R:	Andrew Jeffery <andrew@codeconstruct.com.au>
+M:	Andrew Jeffery <andrew@codeconstruct.com.au>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
 S:	Supported
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -226,7 +226,6 @@
 };
 
 &uart5 {
-	pinctrl-0 = <&uart5_xfer>;
 	rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -396,6 +396,12 @@
 	status = "okay";
 };
 
+&uart5 {
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	pinctrl-0 = <&uart5_xfer>;
+};
+
 /* Mule UCAN */
 &usb_host0_ehci {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -17,8 +17,7 @@
 
 &gmac2io {
 	phy-handle = <&yt8531c>;
-	tx_delay = <0x19>;
-	rx_delay = <0x05>;
+	phy-mode = "rgmii-id";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@
 
 &gmac2io {
 	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
 	tx_delay = <0x24>;
 	rx_delay = <0x18>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
@@ -109,7 +109,6 @@
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
 	clock_in_out = "input";
-	phy-mode = "rgmii";
 	phy-supply = <&vcc_io>;
 	pinctrl-0 = <&rgmiim1_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -22,11 +22,11 @@
 	};
 
 	/* EC turns on w/ pp900_usb_en */
-	pp900_usb: pp900-ap {
+	pp900_usb: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp900_pcie_en */
-	pp900_pcie: pp900-ap {
+	pp900_pcie: regulator-pp900-ap {
 	};
 
 	pp3000: regulator-pp3000 {
@@ -126,7 +126,7 @@
 	};
 
 	/* Always on; plain and simple */
-	pp3000_ap: pp3000_emmc: pp3000 {
+	pp3000_ap: pp3000_emmc: regulator-pp3000 {
 	};
 
 	pp1500_ap_io: regulator-pp1500-ap-io {
@@ -160,7 +160,7 @@
 	};
 
 	/* EC turns on w/ pp3300_usb_en_l */
-	pp3300_usb: pp3300 {
+	pp3300_usb: regulator-pp3300 {
 	};
 
 	/* gpio is shared with pp1800_pcie and pinctrl is set there */
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -92,7 +92,7 @@
 	};
 
 	/* EC turns on pp1800_s3_en */
-	pp1800_s3: pp1800 {
+	pp1800_s3: regulator-pp1800 {
 	};
 
 	/* pp3300 children, sorted by name */
@@ -109,11 +109,11 @@
 	};
 
 	/* EC turns on pp3300_s0_en */
-	pp3300_s0: pp3300 {
+	pp3300_s0: regulator-pp3300 {
 	};
 
 	/* EC turns on pp3300_s3_en */
-	pp3300_s3: pp3300 {
+	pp3300_s3: regulator-pp3300 {
 	};
 
 	/*
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -189,39 +189,39 @@
 	};
 
 	/* EC turns on w/ pp900_ddrpll_en */
-	pp900_ddrpll: pp900-ap {
+	pp900_ddrpll: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp900_pll_en */
-	pp900_pll: pp900-ap {
+	pp900_pll: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp900_pmu_en */
-	pp900_pmu: pp900-ap {
+	pp900_pmu: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp1800_s0_en_l */
-	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
+	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_avdd_en_l */
-	pp1800_avdd: pp1800 {
+	pp1800_avdd: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_lid_en_l */
-	pp1800_lid: pp1800_mic: pp1800 {
+	pp1800_lid: pp1800_mic: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ lpddr_pwr_en */
-	pp1800_lpddr: pp1800 {
+	pp1800_lpddr: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_pmu_en_l */
-	pp1800_pmu: pp1800 {
+	pp1800_pmu: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_usb_en_l */
-	pp1800_usb: pp1800 {
+	pp1800_usb: regulator-pp1800 {
 	};
 
 	pp3000_sd_slot: regulator-pp3000-sd-slot {
@@ -259,11 +259,11 @@
 	};
 
 	/* EC turns on w/ pp3300_trackpad_en_l */
-	pp3300_trackpad: pp3300-trackpad {
+	pp3300_trackpad: regulator-pp3300-trackpad {
 	};
 
 	/* EC turns on w/ usb_a_en */
-	pp5000_usb_a_vbus: pp5000 {
+	pp5000_usb_a_vbus: regulator-pp5000 {
 	};
 
 	ap_rtc_clk: ap-rtc-clk {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -549,21 +549,21 @@
 	mmu600_pcie: iommu@fc900000 {
 		compatible = "arm,smmu-v3";
 		reg = <0x0 0xfc900000 0x0 0x200000>;
-		interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 369 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 374 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING 0>;
 		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
 		#iommu-cells = <1>;
 	};
 
 	mmu600_php: iommu@fcb00000 {
 		compatible = "arm,smmu-v3";
 		reg = <0x0 0xfcb00000 0x0 0x200000>;
-		interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 381 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 383 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 386 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 379 IRQ_TYPE_EDGE_RISING 0>;
 		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
 		#iommu-cells = <1>;
 		status = "disabled";
@@ -2668,9 +2668,9 @@
 		rockchip,hw-tshut-temp = <120000>;
 		rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
 		rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
-		pinctrl-0 = <&tsadc_gpio_func>;
-		pinctrl-1 = <&tsadc_shut>;
-		pinctrl-names = "gpio", "otpout";
+		pinctrl-0 = <&tsadc_shut_org>;
+		pinctrl-1 = <&tsadc_gpio_func>;
+		pinctrl-names = "default", "sleep";
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
@@ -113,7 +113,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_lcd";
 		enable-active-high;
-		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcdpwr_en>;
 		vin-supply = <&vcc3v3_sys>;
@@ -241,7 +241,7 @@
 &pinctrl {
 	lcd {
 		lcdpwr_en: lcdpwr-en {
-			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		bl_en: bl-en {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -213,7 +213,6 @@
 		interrupt-names = "sys", "pmc", "msg", "legacy", "err",
 				  "dma0", "dma1", "dma2", "dma3";
 		max-link-speed = <3>;
-		iommus = <&mmu600_pcie 0x0000>;
 		num-lanes = <4>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso
@@ -23,3 +23,7 @@
 	vpcie3v3-supply = <&vcc3v3_pcie30>;
 	status = "okay";
 };
+
+&mmu600_pcie {
+	status = "disabled";
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
@@ -1551,6 +1551,8 @@ CONFIG_PWM_VISCONTI=m
 CONFIG_SL28CPLD_INTC=y
 CONFIG_QCOM_PDC=y
 CONFIG_QCOM_MPM=y
+CONFIG_TI_SCI_INTR_IRQCHIP=y
+CONFIG_TI_SCI_INTA_IRQCHIP=y
 CONFIG_RESET_GPIO=m
 CONFIG_RESET_IMX7=y
 CONFIG_RESET_QCOM_AOSS=y
diff --git a/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c b/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c
@@ -254,8 +254,8 @@ static int scmi_imx_misc_ctrl_set(const struct scmi_protocol_handle *ph,
 	if (num > max_num)
 		return -EINVAL;
 
-	ret = ph->xops->xfer_get_init(ph, SCMI_IMX_MISC_CTRL_SET, sizeof(*in),
-				      0, &t);
+	ret = ph->xops->xfer_get_init(ph, SCMI_IMX_MISC_CTRL_SET,
+				      sizeof(*in) + num * sizeof(__le32), 0, &t);
 	if (ret)
 		return ret;
 
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
@@ -25,6 +25,7 @@ config IMX_SCU
 
 config IMX_SCMI_MISC_DRV
 	tristate "IMX SCMI MISC Protocol driver"
+	depends on ARCH_MXC || COMPILE_TEST
 	default y if ARCH_MXC
 	help
 	  The System Controller Management Interface firmware (SCMI FW) is
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
@@ -6,6 +6,7 @@
 
 menuconfig CZNIC_PLATFORMS
 	bool "Platform support for CZ.NIC's Turris hardware"
+	depends on ARCH_MVEBU || COMPILE_TEST
 	help
 	  Say Y here to be able to choose driver support for CZ.NIC's Turris
 	  devices. This option alone does not add any kernel code.
diff --git a/drivers/soc/loongson/loongson2_guts.c b/drivers/soc/loongson/loongson2_guts.c
@@ -114,8 +114,11 @@ static int loongson2_guts_probe(struct platform_device *pdev)
 	if (of_property_read_string(root, "model", &machine))
 		of_property_read_string_index(root, "compatible", 0, &machine);
 	of_node_put(root);
-	if (machine)
+	if (machine) {
 		soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
+		if (!soc_dev_attr.machine)
+			return -ENOMEM;
+	}
 
 	svr = loongson2_guts_get_svr();
 	soc_die = loongson2_soc_die_match(svr, loongson2_soc_die);
diff --git a/drivers/tee/optee/supp.c b/drivers/tee/optee/supp.c
@@ -80,7 +80,6 @@ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
 	struct optee *optee = tee_get_drvdata(ctx->teedev);
 	struct optee_supp *supp = &optee->supp;
 	struct optee_supp_req *req;
-	bool interruptable;
 	u32 ret;
 
 	/*
@@ -111,36 +110,18 @@ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
 	/*
 	 * Wait for supplicant to process and return result, once we've
 	 * returned from wait_for_completion(&req->c) successfully we have
-	 * exclusive access again.
+	 * exclusive access again. Allow the wait to be killable such that
+	 * the wait doesn't turn into an indefinite state if the supplicant
+	 * gets hung for some reason.
 	 */
-	while (wait_for_completion_interruptible(&req->c)) {
+	if (wait_for_completion_killable(&req->c)) {
 		mutex_lock(&supp->mutex);
-		interruptable = !supp->ctx;
-		if (interruptable) {
-			/*
-			 * There's no supplicant available and since the
-			 * supp->mutex currently is held none can
-			 * become available until the mutex released
-			 * again.
-			 *
-			 * Interrupting an RPC to supplicant is only
-			 * allowed as a way of slightly improving the user
-			 * experience in case the supplicant hasn't been
-			 * started yet. During normal operation the supplicant
-			 * will serve all requests in a timely manner and
-			 * interrupting then wouldn't make sense.
-			 */
-			if (req->in_queue) {
-				list_del(&req->link);
-				req->in_queue = false;
-			}
+		if (req->in_queue) {
+			list_del(&req->link);
+			req->in_queue = false;
 		}
 		mutex_unlock(&supp->mutex);
-
-		if (interruptable) {
-			req->ret = TEEC_ERROR_COMMUNICATION;
-			break;
-		}
+		req->ret = TEEC_ERROR_COMMUNICATION;
 	}
 
 	ret = req->ret;
